Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹28.7 L+₹4.5 L (18.5%)Rejected-Finance 08 PINK ENCLAVE MAHESH NAGAR BALAJI VIHAR GOPALPURA JAIPUR RAJASTHAN 302015 INDIA | JAIPUR | RAJASTHAN | 302015 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹30.6 L+₹6.4 L (26.6%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹31.7 L+₹7.5 L (30.9%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹32.7 L+₹8.5 L (35.2%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹46.3 L
EMD Value
₹92,580
Closing Date
6 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/ MAINTENANCE OF INTERNAL B/R NATURE WORK IN MD ACCN OF KABUL LINE AND OTM ACCN IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
2023_MES_603591_1
GE/DE-19-2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹92,580
Yes
4 Sept 2023
15 Jun 2023
8 Jul 2023
15 Jun 2023
6 Jul 2023
29 Jun 2023
Amount
M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.
M&L Glazed ceramic coloured tiles of size 200mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.
M&L for Vitrified tiles (Double charge) light Shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and directed.
M&L Vitrified light shade tiles 600mm x 600mm, 8 to 10mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and directed.
M&L Non skid ceramic coloured joint free tiles 400mm x 400mm, 6 to 7 mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.
M&L Non skid ceramic coloured tiles 300mm x 300mm, 6 to 7mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.
S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.
S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed.
S&F in repairs 600mm long tubular towel rails 20mm dia, D type between flanges of brass chromium plated complete all as specified and directed.
S&F in repairs Vitreous China wash basin, white, flat back, size 550X400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs stainless steel sink of thickness of sheet not less than 0.8mm for kitchen or laboaratory with plug, washer and wastes, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed.
S&F in repairs stainless steel plate rack made of thickness of sheet not less than 0.80mm of size 600x750x250mm fixed to wall with suitable rawl plug complete all as specified and directed.
S&F 32mm dia CP waste coupling and 32mm dia flexible waste pipe 1.20 m long suitable for wash hand basin and sink complete all as specified and directed.
S&F in repair 15mm bore dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed all as directed.
S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm bore dia bib taps chromium plated cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed.
S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed.
S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified
S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.
Fixing only tubes 15mm bore any grade with new fittings to walls and ceiling or laying in floors
Taking up or down 20mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified
S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.
Fixing only tubes 20mm any grade with new fittings to walls and ceiling or laying in floors
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.
Demolition of reinforced cement concrete as in chajja, kitchen slab, chullah hood, chimney portion, manhole cover and similar work n.exc 15cm thick and removal of rubbish beyond MOD land complete all as specified and directed.
Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete all as specified and directed.
M&L for reinforced cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)
S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L 16-18mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed of 20mm thick in CM (1:4) complete all as specified and directed.
M&L 16-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. and including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.
M&L 16-18mm Udaipur Green marble stone slab machine cut, bedded jointed and pointed with white cement mixed with pigment to match the shade of stone including cutting, rubbing and polishing surface and rounding off edges match laid over and including 20mm thick screed bed in cement mortar 1:6 and including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.
M&L kota stone slab 18-20 mm thick as a one piece area not exc 1.00 sqm in tread and riser of steps, skirting, dado and pillers laid over 20mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.
S&F in repair 15mm bore brass CP angulay stop cock 2 way complete all as specified and directed.
S&F in repairs health faucet of ABS body with wall hook and one meter stainless tube complete all as specified and directed.
S&F in repair Jet spray CP Brass incl flexible pipe 15mm complete all as specified and directed .
S&F in repairs 15mm dia Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified.
S&F in repairs 15mm dia Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified.
S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified and directed.
S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/trenches or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed.
All as per srl item No 42 here-in-before but 100mm bore
S&F CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed.
S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed.
All as per srl item No 45 here-in-before but 75mm bore.
M&L rendering 15mm thick in cement mortar (1:6) finished even & fair on brick/concrete surfaces including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.
M&L 5mm thick rendering with ready mix mortar of approved make on ceiling surface finished even and fair without using extra cement as whole or in patch including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L preparetion of old decorated plastered surfaces of walls / ceiling etc by complete removal of existing treatment including washing, rubbing down and stopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and dircted.
M&L for applying wall care putty not more than 1mm thick on wall / ceiling even and smooth surface complete all as specified and directed.
M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.
M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L 75mm thick PCC (1:3:6) type C1 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement including joint filling with mastic and including demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed.
S&F in repair 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed.
S&F with 3mm thick ordinary sheet glass fixed with beads fixed with metal panel pins clips complete in squares not exc 0.50 sqm each pane including hacking out old broken glass from any type of frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or welding as per site requirement etc complete all as specified and directed.
M&L in repair for false ceiling with 600mmx600mmx4mm thick 'E' board classic of M/S Eternit Everest Ltd or Charminar make as approved by GE, fixed with and including galvanized iron powder coated inverted 'Tee" or 'L' sections (concealed GI frame work) of 'Cicage' metallic or equivalent suspended from ceiling with provision of galvanized iron wire 45 mm dia and self tapping screws including butterfly clips, hold down clips for fixing the boards to frame complete all as pe manufacturer's instructions and all as directed including two coats of oil bound distember on one side of the board. (a) Size of Main Tee- 39x24.7x0.8mm (b) Size of Cross Tee- 29x24.7x0.8mm (c) Size of wall angle - 22.2x22.2x0.65mm (d) Butter fly clip (e) Hold down clip (f) Size of grid 1.22mx0.61m (g) Two coats oil bound distemper one side of board (h) Powder coating on exposed side of tee/ angle.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L Brick work with sub class 'B' brick staight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.
M&L rendering 15mm thick in cement mortar (1:6) finished even & fair without using extra cement on brick/concrete surfaces on walls etc complete all as specified and directed.
M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair without using extra cement including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.
M&L preparation of surfaces and applying two coats of cement base paint over a coat of cement primer on external surfaces of walls complete all as specified and directed.
M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of cement primer all as specified & directed.
Taking down and refixing the door of any size in same opening after repairing the door complete all as specified and directed.
M&L in repair welding to steel windows, handles, door springs, door hinges, iron frame of doors, rolling shutter of garrage and other miscelanious welding works not exc 10cm in length, complete all as specified and directed.
Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed.
M&L for powder coated aluminium ventilator, openable, (top hung and bottom portion fixed type) without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hook & eye minimum one no on each shutter (for top hung shutter), one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately under respective items of BOQ.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per srl item No 72 here-in-before but without glazing bars.
S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane all as specified and as directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete all as specified and directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for preparation of new steel surfaces, painting two coats of synthetic enamel paints over a coat of red oxide primer exc 10mm width or girth complete all as specified and directed.
S&F in repairs 250mm long MS sliding door bolt, stove enamelled black with bright bolt not less than 12mm dia with and including a min of 6 bolts complete all as specified and directed.
S&F in repairs 125mm size MS pressed handle, oval type stove enamelled black complete all as specified and directed.
S&F in repairs 100mm size butt hinges medium weight cold rolled MS complete all as specified and directed.
S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repairs 75mm size hasp and staple safety type, aluminium anodised, including bolt to hinge plate and fixed with screws all as specified.
S&F in repairs 125mm size aluminium handles cast type anodised ISI Marked
S&F in repairs 125mm size aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F in repair floor door stopper (overall length of cover plate140 mm) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in doors. complete all as specified and as directed.
S&F in repair CP soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in bath including stainless steel railing and CP bracket complete all as specified and directed.
S&F in repair glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed .
S&F in repair 28mm dia MS drapery curtain rod with coloured PVC coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified and directed.
Taking down aluminium door / UPVC door and refixed to same opening after repairing including necessary joining clips, glazing clips, rubber neoprene packing , hinges, alumimium snap beading, screws complete all as specifiedand directed.
M&L in repairs double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminum alloy sheet foundations box main body with stainless steel cover govering pivet made of brass complete all as specificed and directed.
S&F in repair Aluminium (extruded section body) door closer hydraulically regulated, designation no : 3, universal type univer type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.
S&F solid PVC wall lining consisting of 5 mm thick wood grain PVC sheet incl of solvent cement and fixing at site on PVC frame as per specification and drawing .
S&F 5 mm thick PVC sheet fillet of width 35 mm thick wall paneling incl of fixing on to shelter make PVC frame as per specification and drawing.
S&F repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination on both face lamination, fixed with screws / Piano hinges in timber frame work as in Kitchen cabinet / Cupboard Shutters, sides, shelves, top and bottom etc complete all as specified and as dirfected.
S&F in repairs 30 mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed .
S&F in repairs 75mm size butt hinges medium weight cold rolled MS complete all as specified and directed.
S&F in repairs brass body 4 lever mortice lock vertical type size 100 mm complete all as specified and directed.
M/S SIMRAN CONSTRUCTION CO
M/s Durga Traders
S GOURAV PRAKASH ENTERPRISES
Som Nath Kakkar
MAA SANTOSHI ENTERPRISES
M/s Shubh Enterprises
R. S. Associates
S.K. ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .