Improvement work to the replacement of pressed tiles aluminium partially door special plastering for ceiling white washing and allied civil work at 110 33 11 KV SS control room Uranipuram

Chipping the old Plastering and providing new Plastering the ceilling with CM 1:3,10 thick including cost of all materials,labour,lead,lift etc complete

Chipping the old Plastering surface and providing new Plastering for floor with CM 1:5,15mm thick including cost of all materials,labou,lead,lift etc complete.

Removing and refixing of good quality of Pressed tiles of size 230x 230 x20 mm laying over cm 1:3, mixed with crude oil at 10% by weight of cement and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., and including cost of material and labour for applying water proof component over the terrace etc., complete.

Providing new pointing to the existing old damaged weatharing tiles including cost of all materials, labour, transport lead, lift, etc., complete

Supply and fixing of MS Sheet 5 mm thick (18 Gauge) to the damged grill doors and windows including cost all material and labour, lead, lift, etc. complete.

Solid panel PVC door with frame Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

White washing two coats with white cement including cost of all materials,labour lead,lift etc complete

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, door pivot and with 12mm tk. one side laminated board at bottom half portion and top half portion with 4mm thick plain galss glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m

Labour charges for removing and refixing aluminium partition frame and door including the finishing of floors