Construction of CHC Satnali...

[23.26.1]SAFETY ITEMS 1. Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages. [Through Rate]

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate]

[23.26.3]SAFETY ITEMS 3. Supply and erection of shock restoration chart in glass frame. [Through Rate]

[23.26.4]SAFETY ITEMS 4. Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6x4 made of GI pipe 32mm dia). [Through Rate]

[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]

[24.12.46]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 46. 50 Sq mm 3.5core (Arm.) [Through Rate]

[24.12.82]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 82. 185 Sq mm 3.5 core (Arm.) [Through Rate]

[24.15.2]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in 1 per meter below ground level with sand and bricks with all labour and material including digging and refilling of trench as required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 2. 50 Sq mm 3 core [Through Rate]

[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core [Through Rate]

[24.2.7.5]LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core [Through Rate]

[24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm [Through Rate]

[24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm [Through Rate]

[24.2.8.9]LT CABLE 8.9. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 95 sqmm [Through Rate]

[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.5.2.7]MISCELLANEOUS ITEMS 2.7. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 180/150 mm outer dia/ inner dia [Through Rate]

[24.7.3]RCC FOUNDATIONS FOR DG SET 3. 100 KVA DG Set [Through Rate]

[34.29.2]GI barbed wire fencing 2. G.I Barbed Wire Fencing 1.8 Metre High Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres centre to centre founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 [Through Rate]

Supply Erection testing and Commissioning of 11 KV indoor HT metering panel complete with C.Ts P. Ts. Cubical and electronic meter with accurancy class as per requirment/approved by DHBVN at he time of installation, consisting of the following. Cubical panel free standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with chanel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the DHBVN 3 Nos. 11 KV CTS of ratio as approved by DHBVN for indoor installation of appd. Make of 1 Nos. 11 KV PTs 11000/110 Volts Oil filled suitable for indoor installation of approved make of DHBVN. Digital Electronic Meter 3 phase 4 wires recording in KWH and rating and accuracy as by DHBVN with push button display operating system of different kind of readings. The cubical panel will be complete in all respect including intter connection, internal wiring with PVC copper cable, its testing and approval of all item by DHBVN including cost of all testing/ approval charges of all items of DHBVN including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work.(NS)

Supply and Erection of 11 meter pole complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.(NS)..

Supply and Erection of G.I. Half Clamps Wt. 1.47 kg. HVPN Drg. No. 2380 complete the job in all respect upto the entire satisfaction of Engineer-in-Charge. (NS)..

Supply and Erection of G.I. Full Clamps Wt. 2.325 kg. HVPN Drg. No. 2349 complete the job in all respect upto the entire satisfaction of Engineer-in-Charge. (NS)..

Supply and Erection of 11 KV pin insulator with pin complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.(NS)..

S/E stay sets 8` long complete with X-Plat 460mm of Angie 65x65x6 Elbow and Rod wt 13.80kg (NS)..

Supply and Erection of Stay wire/GSS wire 7/8 SWG (4mm) complete the job in all respect upto the entire satisfaction of Engineer-in-Charge. (NS)..

Supply and Erection of G.I. Channel 100x50x6mm 2200mm for H pole, wt. 21.100 kg complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.(NS)..

Supply and Erection of G.I. Angle iron 50x50x6mm 2400mm for earth wire, wt. 10.80 kg complete the job in all respect upto the entire satisfaction of Engineer-in-Charge. (NS)..

Supply and Erection of G.I. Channel T-off 75x40x6mm 2200mm for fuse unit, wt. 15.708 kg complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.(NS).

Supply and Erection of 11 KV GO switch complete with handle, pipe and supporting channel complete the job in all respect upto the entire satisfaction of Engineer-in-Charge. (NS)..

Supply and Erection of ACSR conductor 50mm2 (Rabbit) complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.(NS)..

Supply and Erection of G.I. nut and bolt off sizes complete the job in all respect upto the entire satisfaction of Engineer-in-Charge. (NS)..

Supply and Erection of Lightning arrestor 11KV (3Nos.) complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.(NS)..

Supply, and erection, testing and commissioning of outdoor transformer of 250 KVA 11/0.433 KV 3 Phase 50 cycle copper wound Outdoor type, Vector Group Dyn11,Tapping Range/Steps plus 5% to –10 % in steps of 2.5%, Tap Changer Off Circuit Tap Changer, Temp. Rise (Oil/Wdg.) 40 °/45 ° C, Termination HV/LV/orientation Cable Box/Cable Box/180 deg., Percentage Impedance (IS Tol)4.5% , Cooling ONAN (Mineral Oil as per IS:335), Total Losses @ 50% Load 0.920KW (Max.) as per IS:1180 Level-2 (amend. 4), Total Losses @ 100% Load 2.700 KW (Max.) as per IS:1180 Level-2 (amend. 4), Insulation Level (KVp/KVrms), HV 75/28, LV -_ -/03 up to the entire satisfaction of the engineer of the work with required plate form and fancing etc. As per Latest IS-1180-Level-2. (amend. 4) Make. Crompton/Voltamp/Siemens/Schneider

Please Enable Macros to View BoQ information