GE U(N) 74 2022 23 PROVISION OF 01 AC POINT AND CONNECTED EM ITEMS ALONG WITH PROVISION OF TILING IN BNO P77 INCLUDING PROVISION OF WATER TANKS LIDS UNDER DIFFERENT LOCATIONS OF GE (NORTH) UDHAMPUR

Amount

M & L for dismantling floor , hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed by Engr in Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified & directed by Engr in Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conf to IS 1161-1998 grade St-240 complete all as specified & directed by Engr in Charge.

M & L for roof trusses (framed) trusses purlins cranes / ganttries , rails & fastering & heavy bracket cleats (including distanence pleus cuats etc) Fe-410W (Gde-E-250 quality-A) complete all as specified & directed by Engr in Charge.

M & L for excavation in post holes (or similar holes) each not exceeding 0.5 cum, in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as specified & directed by Engr in Charge.

M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling in post holes complete all as specified & directed by Engr in Charge.

M & L for demolition of cement concrete (Unreinforced) ground floor any thickness at any situation complete all as specified & directed by Engr in Charge.

M & L for non - skid coloured glazed Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed of CM (1:4) incl skirting complete all as specified & directed by Engr in Charge.

S&F glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick cement plaster on fair faceof brick work in cement mortar 1:4 as in backing coat for wall tile complete all as specified & directed by Engr in Charge.

M & L 18 to 20 mm thick,Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20 mm th screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M & L for rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), all as specified & directed by Engr-in-Charge.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor or roof and finished even and smooth with using extra cement complete all as specified & directed by Engr in Charge.

S&F plain cement concrete 1:4:8 type D-2 as in floors 75mm thick complete all as specified & directed by Engr in Charge.

M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified & directed by Engr in Charge.

M&L for Sand cushoning bed (filling under floors) incl spreading levelling watering if required complete all as specified & directed by Engr in Charge.

M & L for hardcore of broken stone or boulders of gauge n. exc. 63mm ,deposited spread and levelled in layers n. exc. 15 cm thick,watered and rammed to a true surface complete all as specified & directed by Engr in Charge.

M & L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stoneaggrigate as in kerb stones and in similar worksbedded and jointed in CM 1:6 incl necessary complete all as specified & directed by Engr in Charge.

S & F round shape water tank lid 1.25mm thick aluminium powder coated alongwith a stainless steel long body locking plate a small pack containing, a thick stainless steel center bolt , a small nylon nut, a thin couple bolt capacity for Water Tank 500 ltr/1000 ltr incl taking down of existing water tank lid from water tank complete all as specified and as directed by Engr-in-Charge and as per sample kept in GE's office/ as per sketch attached.

S&F for 15 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge.

S&F for 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge.

M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified & directed by Engr in Charge.

S & F sheet metal VTPN DBs-DPx3 100 MCCB DBs 04 way (DPx3 160 +12) with metal door 415 volts grade IP 43 protection grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and driected by Engr-in-Charge. Make Legrand Cat Part No 5077 50 or equivalent to shnieder

S & F DPx3 thermal megnatic MCCB 3 pole 100 Amps 415 Volts 46 Ka including making necessary arrangement all as specified and driected by Engr-in-Charge for MCCB DB make legrand cat part No 4200 05 or equivlant to shinder

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways complete all as specified & directed by Engr in Charge.

S&F 'C' series SPN MCB 40 to 63 Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc complete all as specified & directed by Engr in Charge..

S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc complete all as specified & directed by Engr in Charge.

M & L for sub main wiring with 2 single core PVC insulated FRLS unsheathed stranded copper conductor cable of Size 4 Sqmm with and including PVC concealed conduit "ISI" marked with all fittings and accessories and one single core PVC insulated FRLS single core stranded copper conductor cable 4.0 sqmm as contineous earth wire and connected to earth dolly complete all as specified & directed by Engr in Charge.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC surface Conduit as per site requirement including taking down old us submain wiring complete all as specified & directed by Engr in Charge.

Supply and laying in replacment XLPE insulated screened PVC badded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor or size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chassing to any surface and making good to the disturbed surface to match the existing complete all as specified & directed by Engr in Charge.

Supply and electric meter alongwith meter box temper proof LCD display with polycarbonate cover 230V,10-60 Amp accuracy class 50 Hz conforming to IS 13779, IP-54 with parameters to show data time current reading load PF, voltage and KWH complete all as specified & directed by Engr in Charge.

M&L for GI wire 4.00 mm dia suitable for connected to earth pit to MCB DBs complete all as sepecified and directed by Engr-in-Charge.

M & L for GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 80mm dia complete all as specified & directed by Engr in Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (e) Requisite quantity of common salt and charcoal. (f) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the engineer incharge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.

M/s Ess Aar Enterprises

K S BUILDERS

TULSI RAINA AND SONS

KALSOTRA CONSTRUCTION CO

RAMAN KUMAR

anil construction co.

RAJ MOHD

joginder singh and sons

takashdeep traders

SATYA SALES AND BUILDERS