Construction of security check post for the security guards of Mani Mahesh Girls Hostel NIT Hamirpur

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, by the Engineer- in- Charge all kinds of soil including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and laying sand filling under floor including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form including entire carrage of material in all leads, lifts, height and cost of all other incidentals for.

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and accessplat form

Columns, Pillars, Piers, Abutments, Posts and Struts

Vertical and horizontal fins individually or forming box louversband, facias and eaves boards.

Edges of slabs and breaks in floors and walls.Under 20 cm wide

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level excluding entire carrage of material in all leads, lifts, height and cost of all other incidentals for.

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) cum 6788.60

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Steel reinforcement for R.C.C. work of make TATA, Jindal, Jai Bhart including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carrage of material in all leads, lifts, height and cost of all other incidentals

Smooth finishing of the exposed surface of R.C.C. work with 6 mmthick cement mortar 1:3 (1 Cement : 3 fine sand) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make Kajaria,Simpolo ,Nitco,Somany and Cera in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Crazy ceramic tile flooring of make Kajaria,Simpolo ,Nitco,Somany and Cera , with under layer 12 mm thick cement mortar1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, includingfilling the gaps with ordinary cement mixture & mixing with syntheticpolyester fibre, triangular in shape having specific gravity of 1.34 to1.40, cross section size ranging from 10 to 40 micron & length upto 6mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar,including providing and mixing water proofing material in mortar @ 1 kgper 50 kg of cement, all complete as per direction of Engineer-in-charge including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make Kajaria,Simpolo ,Nitco,Somany and Cera , in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete. Size of Tile 600x600 mm including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

15 mm cement plaster on the rough side of single or half brick wall ofmix :1:4 (1 cement: 4fine sand) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)sqm365.25 including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer of make , Birla,Asian, Nerolac, JK Primex over the plastered wallsurface to prepare the surface even and smooth complete including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Finishing walls with water proofing cement paint of required shade of make Asian, Nerolac,Barger,Asian, JK Primax :New work (Two or more coats applied @ 3.84 kg/10 sqm) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Distempering with 1st quality acrylic distemper of make Asian, Nerolac,ICI Dulex having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour. Two coats, including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominalsize) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, includingnecessary excavation, levelling & dressing & finishing the top smooth.sqm614.05 including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. complete : 250x16 mm including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 600x450 mm beveled edge mirror of superior glass of make Saint Govin (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing water closet of make Jaquar, Parryware and its equvelent squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing white vitreous china pedestal type water closet of make Jaquar, Parryware and its equvelent (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require of make Jaquar, Parryware and its equvelent : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing soil, waste and vent pipes Sand cast iron S&S pipe as per IS: 1729 including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

100 mm diameter

75 mm diameter

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 1729 including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

100 mm diameter

75 mm diameter

Providing and fixing plastic seat cover (Solid Type) for European type universal closets with CP brass hinges & rubber buffers including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing Jet connection pipe of make Jaquar, Parryware , Cera including entire carriage of material including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing C.P brass showers of make Jaquar, Parryware, Cera including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing C P brass Angle cock of approved quality of make Jaquar, Parryware, Cera :15 mm nominal bore including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing C P brass tap of approved quality of make Jaquar, Parryware, Cera :15 mm nominal bore including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Long nose

Short nose

Providing and fixing Towel Rail 600mm long Jaquar-ACN 1111 NM/ Cera -CA-603 including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 32 mm dia C.P. long bend of make Jaquar, Parryware, Cera including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 15 mm G.I pipe of make Jindal including all fitting including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing PVC float valve with PVC thread including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Providing and fixing PVC water storage tank of make Sintex,Plasto, Hykon, Polmars including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

White washing with lime to give an even shade : Old work (one or more coats) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Distempering with oil bound premium quality washable distemper of approved brand of Asian/Nerolac/ICI Dulux make and manufacture on old work with one or more additional coats to give an even shade including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Distempering with dry distemper of approved brand of Asian/Nerolac/ICI Dulux make and manufacture on old work with one or more additional coats to give an even shade including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Painting ( one or more additional coats) on old work with synthetic enamel paint of make Asian/Berger/Nerolac on Plastered/concrete/ masonery surfaces having VOC content less than 150 grams/litre of approved brand and manufacture and of required colour to give an even shade including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

Finishing walls with Premium Acrylic Smooth exterior paint of Asian (Apex/ICI Dulux (Weather Shield/Nerolac (Excel) make with Silicone additives of required shade. Old work (one or more coats applied @ 0.83 ltr/10 sqm) including entire carrage of material in all leads, lifts, height and cost of all other incidentals.

RITESH SOOD

Himachal Techno Engineers