PROVIDING KID PLAY EQUIPMENT, WALL ART AND RUBBER MAT IN NEWLY CONSTRUCTED OF CRECHE BUILDING AT COMBINED COURT COMPLEX IN COIMBATORE DISTRICT

Supplying and paving FLOOR MAT with new and best approved quality interlocking Rubber Mat 10mm thick including cost of Materials and labour charges including transporting, spreading and sticking etc., complete complying as directed by the departmental officers.(The mat should be got approved by the Executive Engineer before use on work).

Painting the wall eith DECORATIVE ART of approved design and colour including cleaning and preparation of wall surface, minor filling and smoothing wherever necessary, application of approved adhesive, fixing, alignment, trimming, joint finishing and protection, complete in all respects as directed by the departmental officers. The rate shall include cost of all materials, printing, transportation, labour, Tools and Plants and tackels, scaffolding / access arrangements, fixing finishing at place shown by the departmental officers and all incidental charges etc., complete complying as directed by the departmental officers.(The materials, design and colours should be got approved by the Executive Engineer before use on work).

Fabricating, Supplying and fixing in position Mosquito net arrangements of Openable type. The Outer frame shall be made with Powder coated Aluminium Natural colour matt finish Aluminium Hollow section of size 31mm x 40mm x 1.55mm. The Vertical center Mullion made with Aluminium Hollow section of size 55mm x 11mm x 1.55mm.The Horizontal and Vertical Aluminium Hollow section Shutter frame of size 31mmx13mm with a thickness of 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the shutter with a size of 10mm x 11mm x 1.55mm. The Epoxy coated Stainless Steel 304 grade wire mesh with dia of 0.19mm shall be provided for Net. The U shaped Aluminium handle provided in the each shutter with a size of 19mm x 26mm. The Connection Mechanism between Shutter and Outer frame that enables opening the Mosquito net. The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed. All the Aluminium sections are to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc.complete complying with standard specification and as directed by the departmental officers.

Fabricating, Supplying and fixing in position Mosquito net arrangements of Sliding type. The Outer Sliding frame shall be made with Powder coated Aluminium Natural colour matt finish Aluminium Hollow section of size 40mmx38mmx1.55mm. The Horizontal and Vertical Aluminium Hollow section Slidingtrack shutter frame of size 20mm x 44mm x 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the sliding track shutter with a size of 10mmx11mmx1.55mm. The Epoxy coated Stainless Steel 304 grade wire mesh with dia of 0.19mm shall be provided for Net. The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed. All the Aluminium sections are to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc. complete complying with standard specification and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers.

FOR FOUNDATION AND BASEMENT.

Supplying and fixing of Chain link fencing 50 X 50mm 10gauge with steel frames of L angle of 50 X 50 X 6mm in vertical post @1.80m inteval and horizontal stiffners on 25 X 6mm plate @ 1m interval etc., including cost of Chain link and inclusive of loading, conveyance and unloading at site of work and labour charges for fixing in position etc.,complete complying with standard specification and as directed by the departmental officers.