REPAIR/MAINT OF CERTAIN ELECTRICAL WORK AT

Amount

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-Charge.

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-Charge.

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-Charge

Supply & installation testing and commissioning of 11 KV outdoor type ,gang operated airbreak switch vertical mounting complete with GI operating rod of suitable length for operating mechanism worked from ground level complete in OFF & ON position for current rating up to 200 Amp complete all as specified and directed by engr in Charge.

Supply, installation testing and commissioning dropout fuse unit complete set suitable for 11KV HT outdoor and dropout type of capacity 200 Amps including jumper connections with copper flexible designed jumper and testing & commissioning complete all as per the directions of Eng-in-charge.

M&L for Pin type, porcelain,vitreous, white, green & brown insulator including one galvanised iron steel spindle, two galvanized iron washer and one galvanised iron nut, working pressure 1100 Volts and of size 65 mm dia and 100 mm height ISI marked complete all as specified and directed by Engr in charge.

M&L for shackle type, porcelain,vitreous, white, green & brown insulator including one galvanised iron steel spindle, two galvanized iron washer and one galvanised iron nut, working pressure 1100 Volts and of size 115 mm dia and 100 mm height ISI marked complete all as specified and directed by Engr in charge.

M&L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 metres long) complete all as specified and directed.

Supply and fix in replacement PVC Spacers 2/4 way for LT OH Line 1100 Volts grade with necessary screws nuts bolts etc complete all as specified and directed prevent the lines touching each other on heavy wind as a preventive arrangement to the existing system including removing the existing old/out lived spacers.

Supply and fixing cable route indicator made out cast iron and embedded LT Cable on the plate of size 80 mm dia 5 mm thick and gouting lugg of suitable size including grouted in PCC foundation of suitable size complete all as directed.

Material and Labour for painting of LT Panels including cleaning of exposed surface with brush and empry paper including painting with smoke grey paint all as directed any size of LT Panels complete all as specified and directed by Engr in Charge.

Material and Labour for painting of LT Pole including cleaning of exposed surface with brush and empry paper including painting with Yellow and Black colour with unternate layers of each colour paint upto 1.5 Mtrs complete all as specified and directed by Engr in Charge.

Supply and fixing aluminum thimble of sizes 35/50/70/95 Sqmm complete all as specified and directed by Engr-in-Charge

Supply and fixing aluminum thimble of sizes 120/150/185/240/400 Sqmm complete all as specified and directed by Engr-in-Charge

Dismantling of LT/HT poles and erection of same pole at various locations including dismantling of ACSR conductors, cross arms and other related accessories including stay assembly complete all as specified and directed by Engr-in-Charge

Dismantling of ACSR conductors complete all as specified and directed by Engr-in-Charge

M&L for Supply and installation,Over head, aluminium conductor, steel reinforced, weasel, including making connections and fixing on poles with all necessary arrangements, complete all as specified and as directed by Engineer-In-Charge. Note: Weight of ACSR or all aluminium conductors drawn for overhead lines is to be determined by measuring taut horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra added for sag, jointing, jumpers, etc.

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and directed by Engr-in-Charge.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and as directed by Engineer-In-Charge.

Dismantling stay assembly complete all as specified and directed by Engr-in-Charge.

M&L for Stay assembly complete with accessories as shown in electrical plate No. 1 (Excavation and concrete measured separately) Complete all as specified and directed by Engr-in-Charge.

M&L Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized galvanised iron strip 25×4mm by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 and all as specified.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 10 Sqmm 2 Core. Complete all as specified and directed by Engr-in-Charge.

Supply, Laying, jointing , testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 10 Sqmm 4 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 16 Sqmm 4 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 25 Sqmm 4 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 35 Sqmm, 3.5 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 50 Sqmm, 3.5 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 70 Sqmm, 3.5 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 95 Sqmm, 3.5 Core.

Supply, Laying, jointing, testing and removing old u/s cable, XLPE insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 95 Sqmm, 3 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 120 Sqmm, 3.5 Core.

Supply, Laying, jointing, testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 185 Sqmm, 3.5 Core.

Supply, Laying, jointing , testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 240 Sqmm, 3.5 Core.

Supply, Laying, jointing , testing and removing old u/s cable, PVC insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 400 Sqmm, 3.5 Core.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Harde/dense Soil complete all as directed

Supply and spreading sand for cable cushioning of electric cable 8cm below cable and 15 cm above cable including watering and well ramming in layers complete all as specified and directed by Engr-in-Charge. Note : Punned thickness of 18 cm will be measured and paid for.

Supplying & laying Un-reinforced precast concrete cable cover class LV 2 flat size 250mm x 150mm x 40mm Complete all as specified and directed by Engr-in-Charge.

Supply and laid Tube light grade 40 mm dia GI pipe with all fitting laid in trenches complete all as specified and directed by Engr-in-Charge.

Supply and laid Tube light grade 50 mm dia GI pipe with all fitting laid in trenches complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading levelling watering and well ramming in layer not exceeding 25 cm. Complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point.

Supply and fix in replacement of Off load Change Over switch AC 230 (Side handle) in sheet enclosure, 415 Volt of capacity 100 Amps with connecting acessories complete all as specified and directed.

Supply and fix in replacement of Off load Change Over switch AC 230 (Side handle) in sheet enclosure, 415 Volt of capacity 63 Amps with connecting acessories complete all as specified and directed.

Supply & fixing in replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directedby Engr in Charge.

Supply & fixing in replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 320 Amps with connecting acessories complete all as specified and directedby Engr in Charge.

Supply & fixing in replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete all as specified and directedby Engr in Charge.

Supply & fixing in replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 630 Amps with connecting acessories complete all as specified and directed by Engr in Charge.

Supply and fix Indicator lamp LED type (Red,Yellow, green) moulded single piece suitable for LT Panels after taking out the Old U/S indicator lamp.

M&L for Synthetic Insulating Mat for Electrical Instrument of size 2mx1mx10mm complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 63 Amp 4 Pole of rupturing capacity 25 KA complete all as specified and directed by Engr in Charge.

Supply and fix inreplecement MCCB 100 Amp 4 Pole of rupturing capacity 16 KA complete all as specified and directed by Engr in Charge.

Supply and fix inreplacement MCCB 125 Amp 4 Pole of rupturing capacity 16 KA complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 160 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 200 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 630 Amps current carrying capacity 50 KA, 3 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 630 Amps current carrying capacity 50 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 500 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge.

Supply and fix in replacement MCCB 400 Amps current carrying capacity 36 KA, 4 pole AC, 415 Volts three pole with thermal & adjustable magnetic setting complete all as specified and directed by Engr in Charge.

M&L for Checking, Inspection, maintanance and servicing complete including replacement of unserviceable spare parts of the DG set (comprising of Engine/ Alternator/ Control panel) of the following capacity for smoth functioning complete all as per manufacturers instructions and all as directed by Eng in Charge A. (a) Checking of lubricating oil condition (b) Checking engine for oil, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator (d) Checking of all belts and adjust the tension properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of Oil/Fuel filters and engine oil if necessary (h) Checking of starter motor battery and charger (i) Checking of cooling system and fuel system (j) checking of all power cables and AVR connections and mounting bolt tightnees of alternator (k) checking the function of AVR genaral checks (l) Checking of control panel meters and gadgets functiong (m) Checking of all control and safety wirings B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes of following capacity DG sets NOTE (1) Cost of Spare parts required will be paid and measured separately (2) Servicing/routine check up carried out through authorised service centre of manufacturer (3) Make of spare recommendation by auth service centre of manufacturer. (a) 1010 KVA DG Sets

(b) 750 KVA DG Set

(c) 320 KVA DG Set

(d) 250 KVA DG Set

(e) 100 KVA DG set

(f) 82.5 KVA DG set

Supply in replacement of old unserviceable Battery 12V 180AH with complete all as specified and directed by Engr-In-Charge

S&F in replacement of Fuel filter Element (Primary & Secondary) for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engr-in -Charge 1010 KVA DG Sets

750 KVA DG Set

320 KVA DG Set

250 KVA DG Set

100 KVA DG set

82.5 KVA DG set

S&F in replacement of Oil Filter Element as per existing for following capacity DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engr-in -Charge Make :- Kirloskar/Mico/TVS 1010 KVA DG Sets

750 KVA DG Set

320 KVA DG Set

250 KVA DG Set

100 KVA DG set

82.50 KVA DG Set

S&F in replacement of Air Cleaner Element (inner & outer) suitable for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engr-in -Charge 1010 KVA DG Sets

750 KVA DG Set

320 KVA DG Set

100 KVA DG set

82.5 KVA DG set

Supply and replacement of self starter for following capacity DG Set Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engr-in -Charge 1010 KVA DG Sets

750 KVA DG Set

320 KVA DG Set

Replacement of Turbo charger assy.for following capacity DG sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engr-in -Charge 1010 KVA DG Sets

320 KVA DG Set

250 KVA DG Set

100 KVA DG set

82.5 KVA DG set

S&F replacement of automatic voltage regulator (AVR) 24 volt suitable for following capacity of DG Sets Make Kirloskar/Cummins/Greaves complete all as specifed and directed by Engr-in -Charge 1010 KVA DG Sets

750 KVA DG Set

320 KVA DG Set

250 KVA DG Set

100 KVA DG set

82.5 KVA DG set

darshan kumar gandhi

SUMEET TRADING CORPORATION