8373 REPAIRS TO WALL PANELLING CEILING AND WOODEN FLOORING TO BLDG AT HQ WNC NAD MWC AND ANY OTHER BLDG UNDER AGE BR II NW KUNJALI UNDER GE NW KUNJALI

Amount

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L in repairs for 2nd class hard wood plain fillets exc 13 and n.exc 25 sqcm square, rectangular or triangular in section, cleansawn secured with nails or brads. All as specified and directed.

M&L in repairs for Vaneered decorative marine fire resistant plywood grade I (BWR) resin 18 mm thick with decoratve face vaneer fixed with screw to timber frame. All as specified and directed.

M&L in repairs for 2nd class hardwood 25mm thick boarding planed one side and edges tongued and grooved or rebated,in floor and skirting. All as specified and directed.

M & L for providing "RAJSHRI BRAND" PVC wall panelling consisting of PVC insulated panel having wall thickness of 2mm PVC sheet of density 600 Kg /Cum manufactured by an ISO 9001-2015 certified company and the desired thckness of Expaned polystyrene (EPS) (dependant on the insulation required) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panel are joined, so as to cover the screw of both the panels, using solvent cement. 90 Degree heat bent striops of 5 mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints/pillars etc. All as specified and directed.

M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed.

M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and directed.

Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and directed.

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be measure and paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be measure and paid separately under relevant items.

S&F of aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed. Note:- Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

M&L for Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) in opening as per specifiecation and drawings.

S&F 30 mm thick Rajshri brand factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

S & F in repairs white vitreous china washed down water closet pan, (semi pedestal pattern) anglo indian type, white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.

S & F in repairs white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified and directed.

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed.

S&F in repairs10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. complete all as specified and directed.

S & F in repairs white glazed earthen ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed.

S&F in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap .complete all as specified and directed.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends.complete all as specified and directed.

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.

S&F in repair Vitreous china water closet pan of size 380x725x690 mm, Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, complete with and including all accessories & S Trap - 300 mm complete all as specified and as directed. (Make - Jaquar CAT Part No. - ONS-WHT-10853S300UFSM or equivalent as approved by GE)

S&F in repair Vitreous Wall Hung Basin, of size 560x430x195mm complete with and including all accessories complete all as specified and as directed. (Make - Jaquar CAT Part No. - CNS-WHT-811 or equivalent as approved by GE)

S & F in repairs single piece slim concealed cistern with wall mounting frame, installed kit and S-type drain pipe connection set for wall hung WC including accessories set a complete all as specified and directed. (Make - Jaquar CAT Part No. - JCS-WHT-2400S or equivalent as approved by GE)

S&F in repairs CP towel ring square with round flange all as specified and directed. (Make - Jaquar CAT Part No. -ACN-1121N or equivalent as approved by GE)

S&F in repairs CP towel rail 600 mm long with round flange all as specified and directed. (Make - Jaquar CAT Part No. - ACN-1111SM or equivalent as approved by GE)

S&F in CP toilet roll holder with flap all as specified and directed. (Make - Jaquar CAT Part No.-ACN-1153S or equivalent as approved by GE)

S&F health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Jaquar CAT Part No.-ALD-565 or equivalent as approved by GE)

S&F in repair pillar cock Chrome Plated complete all as specified and directed. (Make - Jaquar CAT Part No. -ALI-85001 or equivalent as approved by GE)

S&F in repairs CP bib cock 15 mm bore complete all as specified and as directed. (Make Jaquar CAT Part No. -CON 047KN or equivalent as approved by GE)

S&F in repair angular stop cock icomplete all as specified and directed. (Make - Jaquar CAT Part No. -QQP-7053PM or equivalent as approved by GE)

S & F in repair for Battery operated urinal sensor Flushing complete all as specified and directed. (Make - Hindware CAT Part Code: 500964 or equivalent as approved by GE)

S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system complete all as specified and as directed. ( Make- Jaquar CAT Part No. OHS-1989 or equivalent as approved by GE)

S&F Corner glass shelf with brackets complete all as specified and as directed (Make - Jaquar CAT Part No. -ACN-1173 or equivalent as approved by GE)

S&F 600 mm glass self assembly fency type with CP frame ( fixed with chromium plated brass brackets and screw complete all as specified and as directed. ( Make- Jaquar CAT Part No.-AKP-35771P or equivalent as approved by GE)

M&L 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end.complete all as specified and as directed.

S&F PVC connection on pipe 450mm long with brass nut bolt complete all as specified and as directed.

S&F PVC waste pipe 32mm dia 800mm long with socket sutable for WHB/Sink/urinal complete all as specified and as directed.

S&F in repairs 75mm dia of out let cast iron floor trap with grating including jointing to waste pipe in cement concrete tybe B-1 (1:2:4). complete all as specified and as directed.

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet outlet etc complete all as specified and as directed.

S&Fof in repairs vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed.

M&L in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

S&F in repairs15mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, fixed as complete all as specified and as directed.

M & L for providing 75mm bore cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints laid in trenches complete all as specified and as directed.

M & L for providing 100mm bore cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints laid in trenches complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank of 1000 ltr capacity (Cylindrical vertical with closed top) ISI Marked hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F rotational moulded polythylene water storage tank of 2000 ltr capacity (Cylindrical vertical with closed top) ISI Marked hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F rotational moulded polythylene water storage tank of 5000 ltr capacity (Cylindrical vertical with closed top) ISI Marked hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F rotational moulded polythylene water storage tank of 10000 ltr capacity (Cylindrical vertical with closed top) ISI Marked hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) including dismantling water tank complete all as specified in SSR Part I and as directed.

S&F in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

S&F under counter wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed. ( Make- Jaquar CAT Part No.-ALD-705 or equivalent as approved by GE)

S&F counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed. ( Make- Jaquar CAT Part No.-ALS-WHT-85601 or equivalent as approved by GE)

M&L in repairs for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers including taking down existing GI water tubing complete all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers including taking down existing GI water tubing complete all as specified and directed.

S &F in repairs 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed .

S & F extruded aluminium alloy handles fabricated type anodized 150 mm size. complete all as specified and as directed.

S & F in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed.

S & F in repair extruded Brass handles fabricated type 125 mm size complete all as specified and as directed.

S & F in repairs extruded Brass handles fabricated type 150 mm size complete all as specified and as directed.

Supply and fix in repairs 125mm size brass handle cast type polished bright complete all as specified and as directed.

Supply and fix in repairs 150mm size brass handle cast type polished bright complete all as specified and as directed.

S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0. complete all as specified and as directed.

S&F in repairs door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed all as specified and directed.

S&F in repairs for 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 etc complete all as specified and directed.

All as per Srl item No. 84 here in before but 75 mm in size

S & F 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F in repair150mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and directed.

S&F in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

S&F 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

S&F in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L for Coloured glazed ceramic tiles in vertical surface 600 X 300 X 10 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc.

M&L for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

M&L for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:4 complete all as specified.

M&L for Italian Marble stone 16/18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Italian Marble stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

M&L for Italian Marble stone 16/18 mm thick machine cutmachine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:4 complete all as specified.

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

S&F roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed.

Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scafolding complete all as specified and as directed

M&L Plastering 15mm thick in CM 1:4 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed .

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed.

M&L for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

Complete removal of existing treatment of walls and applying two two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed.

M & L for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash .

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+8 storey bldg complete all as specified and directed.

M &L for teatment of old walls and applying one coat of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed.

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M & L for preparing new or privious untreated surface applying two coat of varnishing over a coat of wood filler transparant complete all as specified and directed.

M & L for preparing old treated surface applying one coat of varnishing over a coat of woodfiller transparant. Complete all as specified and directed.

M & L for 2nd class hardwood clean sawn batten exc 15 n. exc 25 sqcm at 35 cm centre to centre complete all as specified and directed.

M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M & L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed.

S & F in repairs for door lock 7/8 mm inch mortice handle pair in black silver finish with legend 65 Brass dead bolt double action 6 Lever lock. Complete all as specified and directed.

M & L for complete removal of existing treatment on steel surfaces and applying a coat epoxy putty/Metal putty 1 to 2mm thick on steel surfaces, preparatory and applying two coats of synthetic enamel paint over a coat of red oxide. Complete all as specified and directed.

M&L desilting and cleaning the septic tanks/manholes of any size/shape/depth by removing liquid, waste, night soil, sludge mechanically or manually with all necessary precaution as per rule in vouge as directed including depositing the sludge by excavation with depth not less than 30cms with necessary arrangement to avoid adours such as refilling excavated earth on eposited sludge and removing surplus soil to a distance out side MDarea and deposited where directed complete all as specified. Note :- For purpose of measurement and payment internal size of the tank upto liquid depth only shall be considered.

Cleaning to sewage pipe (SWG) systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 1 hereinbefore for the drain pipes of the following sizes:

Upto 150mm dia

Exceeding 150mm dia

Cleaning to toilets, bathrooms chockup systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 1 hereinbefore for the drain pipes of the following sizes: Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

Providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltrs per sqm of the vertical surface of the sub- stsructure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

Providing and injecting chemical emulsion for post constructional anti-termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltrs per linear metre including drilling and plugging holes etc in apron.

Providing and injecting chemical emulsion for post constructional anti-termite treatment of soil under existing floors using emulsion @ one litre per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1 : 2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

Providing and injecting chemical emulsion for post constructional anti-termite treatment of voids in masonry using chemical emulsion one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floors/surface.

Providing and injecting chemical emulsion for post constructional anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltr/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

M&L for Chipping , removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete as directed. Hard concrete should not be removed by force.

M&L for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

M&L for Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB or equivalent specification complete all as specified and directed.

M&L for Carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/Protectsil CIT/Ferogard 903 on concrete surface (This inhibitor shall have migratory kind of properly which permits the material to migrate to a vertual extent of 100 mm, through pores of concrete , inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete

M&L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as specified and as directed.

M&L for Building up the profile of structural members by using latex additives (MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5 Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling and scaffolding for high rise buildings etc complete all as specified and as directed.

M&L for Providing and applying jacketing around columns/RCC members with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete)

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site cement slurry grout, in the ratio 1:2 (1- Cement, 2-water) including super plsticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled complete all as specified and as directed. (for repair to wall & slab)

M&L for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materials:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting maintain the pressureat exit(0.5 to 1.0 kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles. (Beam and columns)

Drilling of hole 12 mm dia and depth 110 mm dia in brick masonry, after cleaning hole with electric blower and brush, filling hole with dispencing chemical HDM -500 dispencer up to 75% of whole volume with injectable mortar HIT-HY 70 330/2 or equivalents items in Ramset, G E Brand, inserting threaded anchor rod HAS-E RM 10/90/61 of HILTI item No 333123 or equivalent items in Ramset, G E Brand , allow to setup to rest towards including testing.

Drilling of hole 12 mm dia and depth 110 mm dia in RCC member , after scanning with Rebar ditector machine (HILTI PS 35)or equivalents items in Ramset, G E Brand cleaning hole with electric blower and brush, filling hole with dispencing chemical HDM -500 dispencer up to 75% of whole volume with injectable mortar HIT-HY 200-R-500/2 or equivalents items in Ramset, G E Brand, inserting threaded anchor rod HAS-E RM 10/90/61 of HILTI item No 333123 or equivalent items in Ramset, G E Brand , allow to set up to rest towards including testing.

Genius Construction Co.

PRABHU ASSOCIATES

georson constructions