SPECIAL REPAIR/REPLACEMENT OF AC SHEET WITH GALVALUME SHEETS (GI) ALONGWITH ELECTRICAL WORKS AND OTHER ASSOCIATED WKS AT PSG (FABRICATION GP, BLDG NO E-2) OF 510 ARMY BASE WORKSHOP UNDER GE (NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed.

M&L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M& L preparing plastered new surfaces of walls and applying two coats of white wash on walls complete all as specified & directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings and height of buildings upto 12mtr with out stair case complete all as specified & directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions and height of buildings upto 12mtr without stair case complete all as specified & directed..

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions and height of buildings upto 12mtr without stair case complete all as specified & directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe -290 Gde E-165 complete all as specified & directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth complete all as specified and directed.

M&L for Preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of old painted steel or iron surfaces n exc 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints incl cutting chases and holding the pipe with stainless steel ring with powder coated aluminium frame at 1 mtr c/c to be fixed to walls where as required as directed by Engr-in-Charge/GE.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for joint free vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

M&L for joint free vitrified ceramic tiles light shade 8 to10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed.

Dismantling n exc 4.0kg/sqm expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified & directed.

S &F for N exc 4.0 Kg/sqm expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified & directed.

Taking down copper/ aluminium point wiring (ligh, fan, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed.

M&L for surface point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FRLS in and including stove enamelled steel conduit conduit of 20 mm dia or higher, medium grade complete with and including all stove enamelled steel conduit conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed for One light/fan/bell point wiring controlled by one, one way switch/bell push button complete all as specified & directed.

All as per Srl item No 22 above but one out let socket point 3pin 5 amps on independent board complete all as specified & directed.

All as per Srl item No 22 above but on the same board with other switches complete all as specified & directed.

All as per Srl item No 22 above but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board complete all as specified & directed.

All as per Srl item No 22 here-in-before as per above here-in-befor but using 4 sqmm copper conductor for with 4 sqmm earth wire for one 20 amps socket outlet on independent board complete all as specified & directed.

S&F switch piano flush type, 5A, AC, 240V, one way ISI Marked complete all as specified and directed.

S&F switch piano flush type,15A, AC, 240V, one way ISI Marked complete all as specified and directed.

S&F socket outlet flush type, 5A, 5pin, AC, 240V ISI Marked complete all as specified and directed.

S&F socket outlet flush type, 15A, 6pin, AC, 240V ISI Marked complete all as specified and directed.

S&F Electronic Step Fan Regulator, 240V, AC, 240V, ISI Marked complete all as specified and directed.

S&F Ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V, ISI Marked complete all as specified and directed.

S&F in repairs SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 32 Amps complete all as specified and directed.

S&F in repairs LED tube light fitting surface / pendent mounting, decorative box type CRCA batten, 4 feet, 240V, 20 Watt, including T-8 poly carbonate diffuser type 20 watt rectrofit tube rod complete all as specified and directed.

S&F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten, 4', 240V, T5, 20 Watt complete all as specified and directed.

S&F in repairs 100 Watt prewired LED high bay light luminaire incl fixing arrangements complete all as specified and directed.

S&F in repairs 35Watt pewired LED street light luminaire incl suitable OD GI pipe bracket, two nos mounting clamps with nuts, bolts and washers complete all as specified and directed.

S&F in repairs, 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 35KA with Thermal - Magnetic Released with suitable covered metal box complete all as specified and directed.

All as per Srl item No 38 above but 400Amps 50KA complete all as specified & directed.

All as per Srl item No 38 above but 100Amps 18KA complete all as specified & directed.

S&F in repair Metallic Enclosure, SPN DB, 240V, AC, 8 way, double door with 200Amps rated busbar ISI Marked complete all as specified and directed.

S&F in repair MCB SP 6 to 32 A, AC, 240V, 10KA, ISI Marked complete all as specified and directed.

S&F in repair Isolator DP, 40A, AC, 240V, ISI Marked complete all as specified and directed.

S & F in repairs, connect, switch disconnector with kit kat fuse in metallic enclosure 415 V, TPN, 100 Amps complete all as specified and directed

S & F 3- phase cable protection combination box with 63 A , MCB and plug top( 63A3P+N+E ) complete all as specified and directed.

Material and labour for 3 phase sub main wiring with 06 Sqmm nominal cross sectional area, four run of single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including two run of continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic FR PVC concealed conduit of 32 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down submain wiring complete all as specified & directed. Note:-One meter of conduit along with 6x6 sq mm wire shall be measured as one unit length complete all as specified and directed

All as per Srl item No 46 above here-in-befor but single phase sub main wiring with 2 run 6Sqmm + 1run 6Sqmm earth in 25mm conduit (3x6Sqmm - one unit length) complete all as specified & directed.

M/L for earthing complete with copper plate 60x 60cmx3.15mm thick electrode and 20x3mm copper strip as earthing lead field resistance upto 1 ohm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level plate connected with copper strip by means of lug, bolts, nuts, check nuts, washers of copper protection pipe 32 mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around Cu earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed

RAM SAFE INDUSTRIES (BID ID -3275039)

m/s gupta construction (BID ID -3269623)

veer enterprises (BID ID -3274506)