AR and M O to Govt Residential Building at Joghon

Amount

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead ( Not exceeding 3 sq.m in area ) within all leads and lifts and other incidentials.

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres lead. ( un-reinforced cement concrete upto 15cm. Thickness ) within all leads and lifts and other incidentials.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.

For shutters of doors windows & ventilators including providing and fixing hinges/pivotsand making provisions for fixing of fittings

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 12 mm thick

Providing and fixing aluminium anodised powder coated pattern to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately)

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 g with wire of dia 0.56 mm.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 300x16 mm

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. 200x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125mm

Providing and fixing bright finished hard drawn hooks and eyes. 150 mm

Providing and fixing 100mm bright ,finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Providing and fixing M.S. single acting spring hinges bright finished with necessary screws etc. complete 150 mm

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with ( Cement Mortar 1:6 (1 Cement : 6 Sand) )

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. all modes of transportation in all leads lifts and all incidental charges .

White glazed tiles 6mm thick in skirting riser of steps and dado laid on a bed of 12mm thick cement mortar 1:3 (1 cement :3 sand finished with pointing in white cement. all modes of transportation in all leads lifts and all incidental charges .

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete within all leads and lifts and other incidentials.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads and lifts and other incidentials.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads and lifts and other incidentials.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick / stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. all modes of transportation in all leads lifts and all incidental charges.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) sq.m 21.65 131.60 all modes of transportation in all leads lifts and all incidental charges.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 60 mm as per drawings and Technical Specification Clause 1504.

Providing and laying Plain cement concrete in open foundation as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 P.C.C M 20 1:2:4

Providing and laying APP(Atactic Polypropylene polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished rainforced with non-woven polyster matt couristing of a coat of bitumin primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 Kg/Litre and viscocity 70-160 cps. over the primer coat the layer of membrane shall be laid using but one torch and sealing all points etc. and preparing the surface complete. The vital physical and chemical parameter of the mambrane shall be as under: Joint strength in longitudenal and travarse direction at 23°C as 650/450 N/5cm. Tear strength in longitudenal and transverse direction as 300/250N. Softening points of membrane not less than 150°C. Cold flexibility shall be upto-2°C when tested in accordance with ASTM D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of mambrane 22.201-3mm thick.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete with form work and excluding reinforcement for reinforced concrete work in including carriage of material in all leads and lifts.Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Providing and placing PVC water storage tank make SINTEX triple layers with necessary fittings including overflow pipe and scour pipes etc. and ball valve with cover and locking arrangement including providing pads of required sizes for inlet and outlet etc. all modes of transportation in all leads lifts and all incidental charges.a) 1000 liters

Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps (Medium grade) tube fitting and clamps including making good the wall ceiling and floor all modes of transportation in all leads lifts and all incidental charges.15 mm nominal bore :-

Providing & fixing stop cock all modes of transportation in all leads lifts and all incidental charges.(a) 15 mm dia

Providing & fixing CP brass bib tap with capstan head all modes of transportation in all leads lifts and all incidental charges.(a) 15 mm dia

P/F CP brass angle valve15 mm without nut and pipe all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing vitreous china wash basin (white shade) with single hole for pillars with CI or MS brackets painted white including cutting holes and making good the same but excluding fixings all modes of transportation in all leads lifts and all incidental charges.:- Flat back (i) 630x450mm

P/F Stainless steel kitchen sink of approved standard ISI Marked / make with drain board and C.P. Waste with C.I. Or M.S. Brackets painted white including cutting holes and makng good th same but excluding fitting. (610 X 460 mm with bowl depth 200mm )

Providing & fixing CP brass towel rail with CP brass (heavy duty ISI marked no 8931 & 8934) brackets fixed wooden with all modes of transportation in all leads lifts and all incidental charges.(i) CP brass 600 x 20mm

Providing & fixing chromium plated heavy duty brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing 600 x 450mm (six hundred into four hundred fifty mm) beveled edge mirror of superior class mounted on 6mm thick AC sheet of plywood sheet fixed with wooden plugs with CP brass screws and washers complete all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) (seat and cover to be measured and paid for separately) all modes of transportation in all leads lifts and all incidental charges. (i) Anglo Indian (Universal closet)

Providing and fixing plastic seat (solid/ hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers all modes of transportation in all leads lifts and all incidental charges.:- Solid Type (a) colour plastic seat & cover

Providing and fixing PTMT Coloured /White high density polyethylene / poly propypene 10 litres capacity ( full flush) european standard control low level flushing cistren with fittings such as lead valve,syphon, 15 mm nominal size PVC Ball valve with polythene float, with push burron , coupling for connections with inlet, outlet and over floe pipe, 40 mm dia C.P. Flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measurement and paid for separately )

P/F PVC connection pipe with brass union all modes of transportation in all leads lifts and all incidental charges. 300 / 450 mm long (i) 15 mm nominal bore

P/F high pressure PVC spigot and socket waste and vantilation pipes ISI marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials . 110 mm Dia

P/F PVC Plain Bend ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .110 mm Dia

P/F PVC Collars ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and other incidentials .110 mm Dia

P/F 100 mm size P or S trap for water closet (Squatting Pan ) including jointing the trap with pan and soil pipe and cement mortar 1:1 ( Vitreous China ) all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing 100 dia sand cast iron grating for gully floor or Nahni trap all modes of transportation in all leads lifts and all incidental charges.

P/F Tooth brush and Tumbler Holder ( Vitreous China ) within all lead and lift and other incidentials.

P/F bath shower all modes of transportation in all leads lifts and all incidental charges.

Constructing chamber 600x600x750 in size of water meter chamber complete with CI double flat surface box 400x 550x165 mm mm inside with locking arrangement and RCC top slab mix 1:2:4 100 mm thick foundation concrete 1:5:10 and inside plastering in CM 1:3 with afloating coat of neat cement including curing complete all modes of transportation in all leads lifts and all incidental charges. with 200 mm thick wall of brick masonry in CM 1:5

cleaning and removing all scale and dirt etc. From Iron cylinders or tanks and from mouths of circulating pipes etc. 1000 to 2000 litres capcity within all leads and lifts and other incidentials .

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and disposing of all surplus excavated earth as directed with in a lead of 20 metres. Pick/jumper work 50% each a lead of 20 metres. Pick/jumper work 50% each

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in:Foundation and plinth:

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth:

Brick work using common burnt clay building bricks in foundation and plinth in:- Cement Mortar 1:4 (1 cement: 4 Sand) Second Class bricks

Extra for brick work in : Super-structure above plinth level upto floor two level (Second Class Bricks)

Half brick masonry in common burnt clay building bricks in :- Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricksa) extra for super structure upto floor two level :

Steel work welded in built up sections,trusses and framed work ,including cutting ,hoisting ,fixing in position and applying a coat of red lead paint. In gratings framed guard bars,ladders, railling, brackets and similar works.

15mm cement plaster in single coat on fair side of brick/concrete /stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and or rounded angles / not exceeding 80mm in girth and finished even and smooth. (iv) Cement mortar 1:6 (1 cement:6 sand)

White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughlybrushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of puttyasrequired for making the surface.

Painting two coats on steel based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt,dust and other foreign atter sand papering and stopping with ready made paint white or other than white.

BALRAJ SINGH GOVT CONTRACTOR

KHALIL MOHAMMAD GOVT CONTRACTOR

mustak

suriender