ADDITION/ALTERATION TO CEILING AND SIDE WALLS INCLUDING PERIODICAL SERVICES TO ARREST SEEPAGE IN BUILDING NO 12 AT CORA POWAI, MUMBAI

Amount

M&L Brick work with sub class B bricks straight or curvedd on plan exc 6m mean radius built in CM 1:4 including demolition of old brick/stone msonry work built in cement mortar complete all as specified and directed.

M & L rendering 20mm thick (15+5) Ready mix plaster to treated surfaces with Premix plaster with dry mix of proportioned well graded fine aggregates, cement & powder admixutres or polymers/ chemicals confirming to BIS, EN, BS specification standards of approved brand & manufacturer on surface of Brick Work, Cement Concrete/RCC work, Cement concrete Block work applied as per the manufacture's specifications etc. including taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete including scaffolding all as specified and directed.

M & L rendering 15mm thick to treated surfaces with Premix plaster with dry mix of proportioned well graded fine aggregates, cement & powder admixutres or polymers/ chemicals confirming to BIS, EN, BS specification standards of approved brand & manufacturer on surface of Brick Work, Cement Concrete/RCC work, Cement concrete Block work applied as per the manufacture's specifications etc. including taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete including scaffolding all as specified and directed.

M&L for rendering 5 mm thick plastering on fair faces of concrete surfaces of ceiling Ready mix plaster to treated surfaces with Premix plaster with dry mix of proportioned well graded fine aggregates, cement & powder mix as per manufactorers instruction water proofing admixutres (Fosroc,Sikka) or polymers/ chemicals confirming to BIS, EN, BS specification standards of approved brand & manufacturer on surface of Brick Work, Cement Concrete/RCC work, Cement concrete Block work applied as per the manufacture's specifications etc. including taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete including scaffolding all as specified and directed.

S&F in repairs, chicken wire net (wire mess) of galvaniesed steel wire 0.91mm dia 20mm mess size as in reinforcement for plaster work fixed with tinned tacks of staples concealed all complete including scaffolding all as specified and directed.

M&L preperation of new surface of wall and applying two coat of oil bond distemper over and including a coat of primer and over a coat of 3.0mm thick wallcare (in two coats) putty complete all as specified and directed.

M&L preperation of new surface of ceiling and applying two coat of oil bond distemper over and including a coat of primer and over a coat of 3.0mm thick wallcare putty (in two coats) complete all as specified and directed.

"Supply and Application of 4 Layer Thermacool Waterproofing Coating System on leaking concrete wall surface by thorough surface preparation followed opening of cracks, application of absorption coat of Thermacool WP 51, nano-tech modified, UV resistant elastomeric clear coat having min. 50% solids, filling of cracks, then overcoating with 2 Coats of Thermacool WP51 + Cement mixture as waterproofing coat having +450% Elongation, Tensile Strength min. 2.2 MPa and then top-coated with 1 protective coat of Thermacool 0.3C pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) coating conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 coat, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should have been tested at IIT or NABL Approved Lab and application is to be done by Thermogreen cool coat private limited approved applicator only"

M&L for preparation and filling cracks with polymer based chemicals Fosroc/Sikka shrink free or equivalent water proofing for crack not more than 10mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding complete all as specified and directed.

M&L for Injection grouting of cement slurry of the required consistency mixed with approved admixtures ("MCEinpresshilfe EH" of MC-Bauchemie (India) Pvt.Ltd.@ 0.75% of cement by weight or equivalent as approved) in RCC members at 3 to 5 kg/sqcms pressure complete as per manufacturer's specifications & directions of the Engineer-in-Charge. (Note: The unit rate quoted for this item is deemed to inclusive of cement and admixture)

Grouting :- Driling and fixing PVC nozzels in RCC members, including holes, Drilling 12mm dia, 50 to 75 mm deep holes in structural members in staggered manner or as directed by the consultants in RCC structural element. Cleaning of holes : Clean the holes by air blower prior to fixing nozzels. Fixing of Nozzels: Insert 12mm dia PVC nozzels in cleaned holes.External end of nozzels to be machine to receive outlet of grounting gun. Fix it inside the holes by applying 1010 epoxy putty to ensure complete sealing. Cure the system for min 12 hrs. Cutting of nozzels : Cut the nozzels by chisel after completion of grounting without damaging structural elements.

M&L for preparation of old existing treated surfaces of walls/ceilings/chajjas with wire brushing and power washing (Jet washing), on algae and fungal affected area and applying one coat of 100% antifungal acrylic emulsion exterior grade complete all as specified and directed.Note :- (i) work to be carried out in multystory bldg (from grond floor to 15th floor) i.e various floor. (ii) Rate for Scaffolding & Safety system for labours wherever required are included in the rate (iii) Safety Net and Water proofing covering materials shall be arrange by contracter while working at site and it will be deem fit in quoted rates by contracter.

Complete removal of existing treatment of old surface of wall and applying two coat of oil bond distemper over and including a coat of 3.0mm thick wallcare putty (in two coats) complete all as specified and directed.

Complete removal of existing treatment of old surface of ceiling and applying two coat of oil bond distemper over and including a coat of 3.0mm thick wallcare putty(in two coats) complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any descriptrion over 10 cm width or girth and applying one coat of synthetic enamel painting to wooden surface as specified and as directed.(Make:Asian)

M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying one coat of synthetic enamel painting to steel surface as specified and as directed.(Make:Asian)

Taking down old frames, including shutters exc 1.5 Sqm but n.exc 4 Sqm each

Taking down shutters but exc.1.00 sqm but n.exc 2.00 sqm each complete.

Dismantling wall and celling board any thickness, including cover fillets.

Supply and fixing powder coated aluminium frame (powder coated) for doors, windows, ventilators with one or more rebates including joining cletas for fixing complete all as speciefied and directed.

Supply and fixing alminium anodized powder coated door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing/glazing clips, rubbers neoprene packing, handles 2 No's in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F second class Hard wood 35 mm thick flush shutters solid core construction , with particle board and plywood face panels , commercial type on both sides, fitted to chowkats

S & F in repairs, 3 mm thick sheet glass , ordinary quality and glazed with rubber packing/oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S&F 4.8 mm thick ordinary quality glasas and glazing with rubber packing/oil putty in squares exc. 0.50 sqm in each pane complete all as specified directed by the EIC.

M & L for 12mm thick Medium Density laminated Fiber Board, exterior grade for fixing in aluminium door frame section complete all as specified and directed.

M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps,jambs,pillars,window-cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slabs from existing position complete all specified and directed.

S&F in repairs 20 mm dia anodised aluminium anodised powder coated tubular curtains rod with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

S&F in stainless steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

S&F 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed .

S&F in repairs Toilet jet sprey made out of stainless steel flexible tube of 15 mm dia , all as specified and directed. (Make: Jaquar or equivalent as approved)

S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. (Make: Jaquar or equivalent as approved)

S & F in repair 100 mm in size brass 2 levers mortice lock vertical type fixed in door/shutter complete all as specified and directed.

S & F in repair 150 mm in size brass wire type hooks and eye fixed in shutter complete all as specifed and directed.

M/s Qureshi Construction Co (BID ID -3091941)

H R Enterprises (BID ID -3094813)