WELCOME MAINTENANCE TO CERTAIN BLDGS TO VARIOUS UNITS AT MIRTHAL AREA AND RPAIR TO PLASTRING IN CHAJJAS FACIAS STAIR CASE WALL KITCHEN BATHROOM TOILET SUNKEN ROOF TREATMENT LEAKAGE AND RETRO FITTINGS AT STN HQ KANDRORI UNDER GE S PATHANKOT

Amount

Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water, M&L Rendering 5mm thick in cement mortar 1:3 in facia or edging of chajjas, ceiling and roof projection making the line in true shape finished even and smooth without using extra cement as in ceiling and applying two coats of white wash complete all as specified.

Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed with and including water proofing compound including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.NOTE - The rate will inclussive of scafolding for single or double story including making holes in brickwork and making good in cement mortor.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for keys scrubbing down with water, M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc and applying two coat of white wash on wall complete all as specified & directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc and applying one coat of white wash on ceiling complete all as specified & directed.

M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc including filling holes of nails through putty and applying one coat of oil bound distemper on wall complete all as specified & directed.

M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc including filling holes of nails through putty and applying two coat of oil bound distemper on wall complete all as specified & directed.

M&L for preparation of old surfaces of wall, and similar surfaces and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc and applying one coat of oil bound distemper on ceiling complete all as specified & directed.

Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water, M&L Rendering 5mm thick in cement mortar 1:3 in facia or edging of chajjas, ceiling and roof projection making the line in true shape finished even and smooth without using extra cement as in ceiling and applying Three coats of white wash complete all as specified.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for keys scrubbing down with water, M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.

M&L Complete removal of existing treatment from internal surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces , applying 1mm wall care putty on walls and make the surface of level, clean and repair disturbed edgs of bricks/concrete walls finish to even and smooth and applying two coat of oil bound distemper over a coat of primer all as spd and directed.

M&L for applying one coat of synthetic enamel paint on old wooden surface on any description not otherwise described over 10cm width or girth including preparation of old painted surfaces all as specified and directed.

All as per Item No. 13 above, but one coat of synthetic enamel paint on old steel surfaces all as specified and directed.

M&L rendering 10mm thick on concrete in CM 1:3 in facia or ediging of chajjas, ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to crackes in RCC surfaces in true line/shape by providing RCC 1:2:4 type b1 using 20mm graded crushed stone aggregate including all necessary from work to thickness at required at GF and FF finish even and smooth without using extra cement complete all as specified and as directed. NOTE - The rate will inclussive of scafolding for single or double story including making holes in brickwork and making good in cement mortor.

Demolition of brick work stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

All as per item No. 17 above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

S&F for PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs complete.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with clamps complete all as specified and directed.

S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern),CI pipe including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 complete all as specified and directed.

Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, M&L Glazed ceramic joint free coloured tiles of size 450 x 350 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, all as specified and directed.

Dismantling water tanks (Capacity of tank exc 250 Ltr but n exc 500 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts complete all as specified.

Dismantling water tanks (Capacity of tank exc 500 Ltr but n exc 1000 Ltr) and removing from site, S&F Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts complete all as specified.

Demolition of cement concrete unreinforced of any description in any position not otherwise specifically provided for complete all as specified and directed

M&L PCC 1:5:10, type E-2, (using 40mm graded crushed stone aggregate) in foundation filling/sunken floor and mass concrete, all as specified.

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand.

S&F in repair vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket including 15mm bore pillar tap brass chromium plated with capstan head screwed down high pressure with or without lettered Hot or Cold complete all as specified and directed.

M&L in repairs 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement type B-1 1:2:4 and making good wall or floor tiling to match existing surface.

M&L 75mm CI Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured)

M&L 75mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

M&L for 75 mm dia CI cross 'T' double junction, (double T), equal or unequal

S&F 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall

All as per Item No. 39 above but for size 75mm

M&L 100mm CI Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured)

S&F grating round 100 mm size of stain less steel as in repair, complete all as specified and directed.

S&F grating round 125 mm size of PTMT (Minimum weight 40 gms) as in repair, complete all as specified and directed.

S&F in repair centre hole basin mixture valve, cast copper alloy fancy type 15mm brass chromium plated mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe , complete all as specified.

S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs concealed type 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair fancy type Pillar tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F for Flushing jet spray/ health faucet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete.

Taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, S&F GI tube 15mm bore medium grade galvanised ISI marked with all fittings complete on walls complete all as specified and directed.

Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, S&F GI tube 20mm bore medium grade galvanised with all fittings and fixed to short length complete all as specified and directed.

S&F in repair chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F for SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete.

S&F low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane all as specified.

S&F in repair Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fixing in repairs CP wall mixture, valve cast copper alloy fancy type for mixture hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified.

S&F in repair PVC cabinate mirror of size 300x450mm fixed with screw and PVC gutty on wall complete all as specified and directed

S&F in repair chromium plated towel ring fixed with screw to wall complete

S&F in repair SS chromium plated, plated peg set of four fixed with screw complete all as specified and directed.

S&F in repair CP brass toilet paper holder, superior quality complete all as specified and directed.

S&Fin repairs soap dish dish type of milld steel Chromium plated and wooden/ plastic cleats , complete all as specified and as directed.

S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm each.

S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified and directed.

S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc all as specified and directed.

Providing, cement concrete 1:3:6 (20 mm graded aggregate type C1) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and inside pressed steel door frame as directed

S&F 35mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) all as specified.

S&F in repair mild steel curtain rods 25mm dia factory pre-laminated coated fixed all as directed and as approved by Engr in Charge.

Supply and fxing in repair wooden (turned, weathered & mitred) brackets pre polished with french polish and touch wood with cut hole suitable for 25 mm dia rod fixed with screws and gutties in wall, including end caps with wall ornament and fixed to curtain rod with screws of design/ shape complete all as specified and directed.

S & F in repairs for floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick, complete all as specified and directed.

S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour sheet reinforcement with MS square tube, complete all as specified and directed.

S&F factory made solid PVC door shutter, 28 to 30mm thick (style) with 1 or 6 panel design with 4 to 5mm moulded prelam PVC sheet on the front face and 4 to 5mm plain colour PVC sheet on back face with wood free EPS, complete all as specified and directed.

S&F butt hinges 100mm, cold rolled medium weight mild steel, complete all as specified and directed.

S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 150mm long aluminium tower bolts (ISI Marked) extruded type, complete all as specified and directed.

S&F steel window/ventilator with tubular frame factory made double shutters of size 79mmx39mm,16 guage rectangular tubular frame with side hung shutter glazed and guaged with glazing bars 12x3mm flat iron incl projecting type hinges with steel handles and steel peg stay dovetailed or welded incl incluing necessary locking arrangment complete, incl two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings using square/ round bar with ends of bars shoulders/welded drilling holes for fixing of guard bars all as specified.

S&F Anodized aluminium door with shutter vertical member of size 47.62x44.45x1.60mm, bottom member 114.3x 44.5x1.60mm lock rail 63.5x44.45x1.6mm and frame size101.6x44.45x1.60mm with and including providing and fixing 2 Nos aluminium door handles of 150mm size to each shutter, tower bolts 200mm size , 5.5mm thick tinted glass and cylindrical lock including rubber gasket & neospreme lining complete all as specified and directed.

S&F Anodized aluminium window with side hung shutter vertical member of size 47.62x44.45x1.6mm and frame size 101.6x44.45x1.6 mm with and including providing and fixing 2 Nos aluminium handles 150mm size to each shutter, tower bolts 150mm size 2 Nos Aluminium hinges 100mm size to each shutter, 5.5mm thick tinted sheet glass and cylindrical lock including neospreme lining and rubber gasketc omplete all as specified and directed.

S&F for Partition consisting of anodized aluminium with bottom rail of size 114.30mm x 44.5x1.6mm and top, centre and vertical rails of size 63.5x44.45x1.60mm and frame size 101.6x44.45x1.60mm with 5.5mm thick tinted glass sheet or 12mm thick PVC sheet best quality, rubber gasket (as approved) and aluminium beading 20x3mm size in position complete all as specified and directed

S&F in repair 5mm thick tinted glass in door shuters with aluminium beading/ glazing clip of both side complete all as specified and directed.

Dismantling of Asbestos cement (plain) sheets in roof coverings, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed.

Dismantaling of old brick tile as in roof traetment and Cleaning of existing treatment of any description completely & washing rubbing with water

M&L 40mm thick brick tiles laid on cement mortar 15mm thick in CM 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per item No. 91 abovebut except brick tiles laid on cement mortar 15mm thick in CM 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M&L PCC padding in roof slabs/chhajjas in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate with and incl integral water proofing compound @ 3% weight of cement and providing necessary slope towards outside.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per Sqm and providing 20mm thick rendering in cement mortar 1:4 on fair faces of concrete, finished even and fair mixed with and including water proofing compound to receive treatment on roof Providing and laying of water proofing treatment of roof APP (Atactic polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, with non woven polyester mat reinforcement of 160gsm, weight of membrane @3.6 Kg/Sqm over a solvent based bitumen primer, @0.30 Ltr/Sqm by same manufacturer conforming to IS: 3384-1986. The membrane shall be laid using bitmun torch. The end lap should be 100mm and the side lap must be minimum 75mm. The membrane shall be first laid up to the parapet wall junction and then shall be overlaped with another memberane (flashing) with an overlap covering upto a distance of 300mm. In case parapet height is less than upto 500mm, membrane shall be terminated at the top of parapet. All rain water pipes opening shall be suitable sealed with APP membrane all as specified and directed by Engineer-in-charge. ( The rate uncludes for fillling of crackes in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed by Engr-in-Charge

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets. S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back availabel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips

S&F solid PVC Wall lining consisting of 5mm thick colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame incl fillets as per specifications and drawings

M&L prelaminated 18 mm thick lead free factory made 100 % solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30 % wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg(+- 5%) manufactured by ISO 9001-2015 certified company.the sheet should be 100 % water proof,termite proof ,fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness.complete including all fittings like handle,piano hinges, hinges,hydraulic stoper,beading etc as per direction of Engr-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S & F Magnetic door catches with sticking plate of standard size for cupboard doors approved by GE

S&F 100mm Hasp and staple, safety type, aluminum anodised including bolt to hinge plate and fixed with screws complete

S&F Continuous (Piano) hinges, mild steel , bright finish or electrogalvanised with wide of flaps 30mm in repairs all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washer and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overallsize 915mmx460mm bowl size 410mmx 330mmx160mm complete all as specified and directed.

S&F, Stainless steel Plate rack 775X750X 0.6mm thick, complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, rafters rails and fastenings and heavy bracket framing (beem, tee, angle, channel or flat sections) including distance pieces, cleats etc of FE 410 W (Gde E-250) quality B including one shop coat of red oxide primer complete all as specified and directed.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

ADVAIT CONSTRUCTION CO

VIJAY CONSTRUCTION CO

BUILDEX CONSTRUCTION CO

M/s gurdial singh and co

V K Sharma and Sons