NREP-1/RANCHI-04/2022-23, Construction of Dhumkuria Bhawan located in BajrangChowk Near Getalsud Dam, Ranchi Jharkhand

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. In cement mortar 15.7.4

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a) 1:3:6 or richer mix. 15.2.1

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead Of area 3 sq. metres and below 15.12.1

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Hard rock (blasting prohibited) 2.7.3 D.S.R.

Drill for anchoring MR 6.21.1 WRD

25 mm dia Reinforcement on drill MR 5.5.4 JSR

EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I 5.1.1 J.S.R.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B) 5.1.2 JSR 60% Quantity vide item no. 1

EARTH FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) 5.1.7 JSR

EARTH FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) 5.1.8 JSR

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) 5.1.10 JSR

Providing designation 75-A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge. 5.6.1 JSR

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto pinth level : 1:2:4(1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size) 5.3.1.2 JSR

Providing P.C.C. M-100 with nominal mix of (1:3:6) in Foundation with approved quality of stone metal grade-III(50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. (5.3.1.4)

Centering and shuttering including strutting, propping, etc. and removal of form for Foundations, footings, bases of columns, etc. mass concrete 5.3.17 JSR

Providing P.C.C (1:4:8) in subbase all complete 4.60X1.95X0.15+1.10X0.85X0.15 : 1.44 5.3.4

Providing 75A Brick work in foundation all complete 5.2.2

Providing R.C.C (1:5:3) in lintel all cost complete 5.3.8.1

Providing 125mm thick brick work in partition all 5.2.23

Providing 12mm. Cement plaster all cost complete 5.7.14

Providing 1.5mm cement punning all cost complete Re. item no. 8 5.7.11

Providing R.C.C (1:1.5:3) in slab all cost complete 5.3.9.1

Supplyig C.I Cover 600X450MM (Wt. 25 Kg) - 4 nos (JSR basic rate 2668 + 10% CP) Pge 42 it. No. 26(b)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto pinth level : 1:2:4(1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size) 5.3.1.2 JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Foundations, footings, bases of columns, etc. mass concrete 5.3.17 JSR

Providing and laying in position specified grade of reinforced cement concrete, exluding the cost of centring, shuttering, finishing and reinforcement: all work upto plinth work 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) 5.3.9JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Foundations, footings, bases of columns, etc. mass concrete 5.3.17 JSR

Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts, and struts etc. above plinth level upto floor five floor, exluding the cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) 5.3.10 JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Foundations, footings, bases of columns, etc. mass concrete 5.3.17.6 JSR

Addational charge for shuttering @rs 337.71 per SQM 5.3.17.5 JSR

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15◦ landings, balcony, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases, above plinth level upto floor five level, exluding the cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) 5.3.11JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Suspended floors, roofs, landings, balconies, and access, platform 5.3.17.3 JSR

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15◦ landings, balcony, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases, above plinth level upto floor five level, exluding the cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) 5.3.11JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Suspended floors, roofs, landings, balconies, and access, platform 5.3.17.3 JSR

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15◦ landings, balcony, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases, above plinth level upto floor five level, exluding the cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) 5.3.11JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Suspended floors, roofs, landings, balconies, and access, platform 5.3.17.3 JSR

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15◦ landings, balcony, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases, above plinth level upto floor five level, exluding the cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size) 5.3.11JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Suspended floors, roofs, landings, balconies, and access, platform 5.3.17.3 JSR

Providing Toe steel reinforcement of 8mm dia to 32 mm dia rods as approved design and drawing excluding carriage of M.S, bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500(only valid for SAIL & TATA Steel) 5.5.4+5.5.5 JSR Reinforcement Bar in R.C.C.

Providing designation 75A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.. 5.2.3 JSR

Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge 5.2.14 JSR

Providing designation 75-B brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.. 5.2.6 JSR

Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge 5.2.11 JSR

Providing designation 75B one brick flat soiling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I(5.6.3)

Providing 19 mm thk. Water proof cement plaster (1:3) with clean coarse of sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I. 5.7.15 JSR

Providing 12 mm Thk. cement plaster(1:6) on walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I 5.7.3 JSR

Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I 5.7.6 JSR

Providing and applying Thermoflex P-111/Sikka coolcoat or any other Equivalent compound of roof od slab as per following procedure (i) Surface preparation :- Surface of roof slab should be cleaned with wire brush, Dust particle should be removed and surface should be washed with high water pressure and should be get dried. (ii) Primer Coat :- Thermoflex P-111 should be diluted with potable water in 1:1 ratio and this solutation should be applied on cleaned and dry surface with soft brushy roller. (iii) 1st Coat P-111 :- After 3 hours of primer coat first coat of P-111 without any dilutation should be applied with soft brush/roller (iv) when the first coat is partialy and acraylic fibremesh 80GSM mat should be laid and pressed with roller (v) Second / Final Coat :- 2nd coat P-111 (without any dilution) should be applied after 3 hours of 1st coat it should be allowed to dry for 4 hours not be any water contact on surface till 24 hours of final completion of treatment 5.12.10 JSR

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 600x600 5.6.28 JSR

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm 5.6.28 JSR

Providing and laying 25 mm thick kotah stone slab flooring of approved size, texture and colour over 18 mm of thick base of lime morter (1:1:1) (lime putty:Surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.(iv)600x600 5.6.19 JSR 11.46.4 DSR

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 1000x1000 mm 5.6.28 JSR

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including the cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification.) Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.41 JSR + 5.8.45 JSR

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, variety counters, window sills, facias and similar locations of required size, approved ahade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement: 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.2.1.1 DSR

Stone tile(polished) work for wall lining over 12mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and cement slurry@ 3.3 kg/sqm including pointing in white cement complete 8.9.1 DSR

Finishing wall with Premium Acrylic Smooth Exterior paint of required shade with Silicon additives on new works in two or more coats applied @ 1.43 Ltrs/10 Sqm. Over and including base coat of water proofing cement paint applied @ 2.2 Kgs/10Sqm. All complete job.Providing and applying POP putty of 2 mm thickness over plastered surface to prepare the surface even and smooth all complete as per building specification and direction of E/l. 13.47.1+13.26 DSR

Providing two coats of plastic emulsion of approved shade and make over a coat of of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying puuty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 5.8.21JSR + 13.26 DSR

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 13.45.1 DSR

Finishing walls with premium arcylic smooth exterior paint withsilicone additives of required shade: New work(Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 13.47.1 DSR

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 13.80 DSR

Providing and laying pressed clay tiles(as per approved pattern 20mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4(1 cement:4coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4(1 cement:4coarse sand) and finished neat complete 12.20 DSR

Supplying, fitting and fixing good quality, well dressed and wall seasoned sal wood in chaaukhat in doors, windows skylights, fanlights C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels as complete as per building specification and direction of E/I 5.4.1

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. 21.10 DSR

Supply fitting and fixing 32mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings Iron fittings such as hinger, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. 5.4.38 J.S.R.

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.) 5.5.13 JSR

Supplying, fitting & fixing 20 GAUGE GCI sheet gate fitting on MS angle frame of size 60x60x6mm including cost of fabrication and necessary locking arrangement with haskal and dommy standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I 5.5.29

Supply, fitting and fixing M.S. grill gate made of 20x6mm M.S. flats or 16mm.M.S. Square bars fitted on 25x25x6mm. M.S. square bars fitted on 25x25x6mm M.S. angle frame (where steel is not supplied by the deptt.) 5.5.30 JSR

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) Per sq.m @ 42 kg/SQM 5.5.12 JSR

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand . 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth - do - do - all complete job as per direction of E/I. 4.17 DSR

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: Pre treatment 2.35+2.35.2 DSR

Providing 250 mm wide brick drain in cement mortar (1.6) with av. 150mm, clear depth and 250mm apron including cost of earthwork involved with 75 mm cement concrete (1:4:3) over one brick designation 75A, flat solling in proper grade and slope at the base, the drain duly plastered in CM (1:3) with punning over exposed surface all complete as per building specification and direction of E/I 5.10.33 DSR

Providing and laying vitrified Cool Roof tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 154557-2007 / 15013006, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. Its solar reflective index (SRI) value should be above 78. complete. Size of Tile 300X300 mm X 10 mm thick. 5.6.29 JSR

Finishing wall with Premium Acrylic Smooth Exterior paint of required shade with Silicon additives on new works in two or more coats applied @ 1.43 Ltrs/10 Sqm. Over and including base coat of water proofing cement paint applied @ 2.2 Kgs/10Sqm. All complete job.Providing and applying POP putty of 2 mm thickness over plastered surface to prepare the surface even and smooth all complete as per building specification and direction of E/l. 13.47.1+13.26 DSR

Providing and laying 80 mm th.Inter locking blocks in flooring over a bed sand, including sand packing in the gap of blocks of approved pattern and design including taxes all complete job. 16.91.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto pinth level : 1:2:4(1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size) 5.3.1.2 JSR

Centering and shuttering including strutting, propping, etc. and removal of form for Foundations, footings, bases of columns, etc. mass concrete 5.3.17 JSR

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 2.1 2DSR

a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum pr 100 meters and supplying and planting hedge plants at 30 cm apart) JSR Road 11.7

Maintainance of hedge for one year JSR Road 11.7 B

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). For Ground area for preparation 1200 sqm DSR HOR 2.1

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). For lawn area DSR HOR 2.2

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment)For lawn area (2.4.1) DSR HOR 2.4

Fine dressing of the ground DSR HOR 2.7

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately) DSR HOR 2.8

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge DSR HOR 2.8

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of grith up to 150mm measured JSR 8.1.3.2

Supplying and spreading of sand in lawn area, including watering and dressing complete. DSR HOR 2.27

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/ articles shall be provided by the department.) DSR HOR 2.39

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) DSR HOR 2.57

Providing and fixing of Tuflex Garden fencing Hexagonal net/or equivalent of green colour having contents ( Weight grams/sqm. 510 (+/- 8%)) in width of 60 cm. with bamboo of 90 cm. length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm. below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. The net and bamboo should be binded with 2 mm. G.I. Wire at three places properly as per direction of Engineer-in-charge. DSR HOR 2.58

Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. DSR HOR 7.11

Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. DSR HOR 3.18

Providing and displaying of Schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. DSR HOR 3.85

Providing and Displaying Allyssum white in full bloom well developed fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. DSR HOR 4.1

Providing and Displaying Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge. JSR HOR 4.50

Providing and Displaying Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge. DSR HOR 4.24

Providing and Displaying Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. DSR HOR 4.27

Providing and Displaying Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. DSR HOR 4.37

Providing and Displaying Mimulus multi branching bushy plant in different colour well developed fresh & healthy in full bloom in 20 cm Earthen Pot in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. DSR HOR 4.42

Providing and Displaying Nasturtium in different colour well developed with fresh & healthy foliage with full bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge. DSR HOR 4.44

Providing and Displaying Verbena in different colour having 30 to 45 cm ht.,well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge DSR HOR 4.70

Providing and stacking of Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in charge. DSR HOR 8.9

Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. DSR HOR 4.88

Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. . DSR HOR 9.8

Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. JSR HOR 4.91

Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR HOR 7.17

Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR HOR 7.18

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v DSR HOR 7.24

Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. DSR HOR 7.27

Providing and stacking of Ficus bengalensis krishna of height 75-90 cm., multibranched in earthen pots of size 30 cm as per direction of the officer-in-charge DSR HOR 7.30

Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR HOR 7.45

Providing and stacking of Cassia biflora of height 60-75 cm. with 4-5 branches in poly bags of size 25 cm as per direction of the officer-in charge. DSR HOR 7.74

Providing and stacking of Saraca indica (Sita Ashok) of height 105-120 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR HOR 7.80

Providing and stacking of Schleichera trijuga (Kusum) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. DSR HOR 7.81

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (A) With "P" trap (b)12.5 lit. low level P.V.C. cistern 3.2.2 b

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry hindustan or any other ISS approved make with 100mm HCI p trap 15 litres CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipe about 2m long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm CI body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/I. 3.2.1c (A) 580 mm long with 12.5 litre low level PVC cistern

supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supported on painted C.I OR R.S bracket 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 grames, 32mm PVC wate pipe 750mm long with brass coupling with one end and making plumber joints etc.all complete as per specification and direction of E/I. 3.2.5

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass lush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required 17.5 DSR Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 17.5.1 DSR

Supplying, fitting and fixing gun metal full way valve of approved quality all complete as per specifcation and direction of E/I. 3.1.12 20mm dia.

25mm dia.

32mm dia

40mm dia

Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/I. … 15mm dia. 3.1.6

Cutting chajjas or concrete for laying PVC Pipe and restoring the same with R.C.C. (1:2:4) brick work in cement Mortar (1:4) and cement plaster 1:4 as per specifiction and direction of E/I 3.1.17

Making holes in walls for PVC Pipe and restoring the same atfer pipe Laying (b) 250mm thick wall 3.1.18

Cutting drain width wise above GL for laying PVC pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in C.M. (1:4) with neat cement punning as per specifciation and direction of E/I. (PVC 110mm dia) 3.2.10

Making holes in wall for laying PVC pipes and restoring the same all cost complete (PVC pipe 250mm dia) 3.2.11 (ii)

Supplying all tolls and labour and cutting chajja cornice for laying PVC pipes and making good the same as per specification and direction of E/I. 3.2.9

Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 30% for labour and Contractors profit) SOR basic rate + 30% for labour and CP Pillar cock (long neck) (Basic rate Rs.756.60 + 30% for C.P. & laying charge) Page -17 - 42(ii)

Bib cock - long thread (Basic rate Rs.701.10 + 30% for C.P. & laying charge) Page 17 42(iv)

Angular stop cock L.T.(Basic rate Rs.572.85 + 30% for C.P. & laying charge) Page 17 -42(vi)

Glass shelf (Basic rate Rs.641.25 + 30% for C.P. & laying charge Page18 -(xxvi)

Flush valve complete with 32mm size control cock & flange (Basic rate Rs.3283.00 + 30% for C.P. & laying charge Page 18 -42(xxviii)

32mm dia. PVC waste pipe 750mm long with cushion (Basic rate Rs.52.00 + 30% for C.P. & laying charge Page 17-(ii)

15mm C.P. nipple with coupling(As per JSR 15 basic rate Rs.72.70 + 30% C.P. & laying charge) page-17- (vi)

Providing Solvent cement (as per JSR 15 basic item - 240.00 + 30% C.P & laying charge Pg17 itm-37

Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm 3.1.21 (b)

Supplying, fitting and fixing C.P. brass soap dish container medium quality with screw and hinges etc. 3.1.21 (cii)

Providing and fixing 15mm dia and 45cm long PVC connection pipe with heavy quality brass coupling at both ends etc all complete as per specification and direction of engineer in charge 3.1.9

Supplying, materials and labour for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. 3.3.8

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931, 15mm dia nominal bore of approved brand C.P. fittings DSR 18.49

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quaility and colour 15mm nominal bore weighing not less than 32gms. DSR 18.75.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc. DSR 18.7 20mm nominal bore 18.7.2

25mm nominal bore 18.7.3

32mm nominal bore 18.7.4

External work - 40mm nominal bore 18.7.5

Providing & fixing on wall face unplasticised - Rigid P.V.C. pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia DSR 12.41.2

Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. DSR 12.42 Single Tee with door 12.42.3 110x110x110 ,mm 12.42.3.2

Bend 87.5 degree 12.42.5 110 mm bend 12.42.5.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48 DSR

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 19.32+19.32.1 DSR

Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 1.3.3 DSR E&M Gr-C

Supply and Fixing Light Plug Point with Modular Type Accessories:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). 1.3.1 DSR E&M

Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required. 1.3.2 DSR E&M

Supply & fixing 20A SPN MCB Industrial Socket Outlet: Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required. 2.18 DSR E&M

Power Plug Wiring in PVC conduit (2x4 sq. mm): Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1.5 DSR E&M

Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 1.7 DSR E&M 2x1.5 Sqmm + 1x1.5 sqmm earth wire 1.7.1

2x2.5 Sqmm + 1x2.5 sq mm earth wire 1.7.2

2x4 Sqmm + 1x4 sq mm earth wire 1.7.3

4x6 Sq.mm + 2x6 Sq.mm earth wire. 1.7.9

4x10 Sq.mm + 2x6 Sq.mm earth wire. 1.7.10

S/F TP MCB DB:- Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). (All TP MCB DB shall be as per IS:8623) 2.9 DSR E&M 4 Ways (4+12 ways) double door 2.9.1

6 Ways (4+18 ways) double door 2.9.2

8 Ways (4+24 ways) double door 2.9.6

S/F 'C' series MCB:- Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.12 DSR E&M 6/32A Single Pole 2.12.1

6/32A TP MCB 2.12.8

63A TPN MCB 2.12.10

S/F Ceiling Rose: Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 1.33 DSR E&M

S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required. 1.34 DSR E&M

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1.27.1 DSR E&M 4 Module (125mmX75mm) 1.27.3

6 Module (200mmX75mm) 1.27.4

ITC fluorescent fitting directly on surface :- installation testing and commissioning of Pre - wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, directly on ceiling / wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required. 1.41 DSR E&M

ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required. 1.44 DSR E&M

S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. 1.25 DSR E&M

Installation of exhaust fan in the existing opening, includingmaking good the damage, connection, testing, commissioningetc. as required. 1.48 DSR E&M Upto 450 mm sweep 1.51

Telephone Wiring in Existing Conduit: Supplying and drawing, following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required. 1.16 DSR E&M 2 pair 1.18.2

S/F Modular type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 1.24 DSR E&M Telephone socket outlet 1.24.6

Copper Earth Plate Electrode: Earthing with copper plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. 3.6 DSR E&M

Salt/Charcoal for pipe earth electrode Extra for using salt and coke for G.I. or copper plate earth electrode as required. 3.7 DSR E&M

Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. 3.9 DSR E&M

Providing and fixing 25mm x 5mm copper earth strip in pipe: Providing and fixing 25mm x 5mm copper earth strip in 40mm dia. G.I. pipe from earth electrode, as required 3.13 DSR E&M

Supply installation, testing and commissioning of following size ceiling fan 3 blades Confirming to IS:374:2019 including the down rods of standard length (upto 30 cm) with 1.5 sqmm FR PVC insulated, copper wire suitable for 230V 50 Hz, single phase supply etc. complete as required. 1400 mm 56" 9.4.2 JSR E&M

Provioding and laying 1.1 KV grade aluminium armoured cable as per IS 1554 (Part I) heavy duty all cost complete including cost of brass compression gland, cable jointing and end termination as per specification and direction f E/I. Basic rate +40% for laying & C.P. 3.5 core, 95 sq.mm 1910

3.5 core, 50 sq.mm 1908

Providing PCC M-75 with nominal mix of (1:3:6) in filling in plinth & sunken slab of toilet with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering,mixing, placing in position, vibration, striking, curing taxes and royalty all complete as per building specification & direction of E/I 5.3.1.5

Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxex and royalty all complete as per building specification and direction of E/I. 5.3.9.1 JSR

Reinforcement for RCC work including straightening, cutting, bending, placing in position and bondind all complete 5.50

Providing 12mm thick water proof cement plaster(1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I(Cost of cico will be paid separately) 5.6.10

Supplying, assembling, lowering and fixing in vertical position borewell unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 23.4 DSR 100 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in- 23.5 DSR

Supplying, filling, spreading & leveling gravel of size range 5 mm to 10 mm, in recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per direction of Engineer-in- 23.6 DSR

Supplying, materials and labour for construction inspection chamber of designation class 75B bricks size 750mm deep, 600X450 mm internal dimension having 250 mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster(1:6) with 600X475 mm G.I. cover with frame (weight not less than 35 kg) along with earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. 3.3.8 DSR

P/L NP2 class R.C.C pipes with collars joint with stiff mixture of cement mortar in the proportion of (1:2) 19.6 DSR 250 mm dia. R.C.C pipe

Supplying and fixing C.I cover without frame for manholes: 560 mm diameter C.I cover (medium duty) the weight of the cover to be not less than 58 kg 19.18.2 DSR

Cost of drilling 200 mm X 165 mm X 125 mtr deep borewell in all kind of soil and rock in rural area for installation of pump set with hydraulic DTH rig machine on complete including all material tools drilling rig air compressor reand equipment will as fuel lubricant sand cost of transportation of rig machine and weather vehicle of to site PHED page no - 31 item no 115 (a) From 0.00m to 50.00m below to g.l

(b) From 51.00 m to 125.00 m

© From 126.00 m to 150.00 m

Suplying asembling lowering and fixing in vertical position in borewell unplastisized PVC medium well casing (CM) pipe of required dia confirming to IS: 12818 including required hire and labour charges fitting and acesories etc. all complete for all depth as per direction of engineer - in - charge 200 mm nominal size dia DSR 23.3.3

Development of tubewll in accordance with IS: 2800 (part1) and IS: 11189, to stables maximum rate of usable water yield without sand content (beyond permissible limits) with required capacity air compressors running the compressor for required time till well is fully developed measuring yield of well by "V" notes method for another approved measuring method static level and drow down etc. by step drow down method collecting water samples and getting testing approved labarotary i/c disinfection of tubewell all complete including hire and labour charges of air compressor and tool and assecories etc. all as per requirement and direction of engineer - in - charge DSR 23.12

Providing and fixing suitable side threaded mild steel cap all support weilded plate to the top of borewell housing / casting pipe removable as per requirement all completed for borewell of 200 mm dia DSR 23.13.3

Providing and fixing MS clamp of require dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part 1) including necessary bolt and nuts of required size complete 200 mm clamp DSR 23.14.3

Supplying 100 mm dia submersible pump sets confirming to 8034 and motor confirming t0 IS: 9283 pump shall be suitable for various delivery had and motor suitable for working on 415+10, 3 HP, 50 ZH, AC supply with cable guard thrust carbon/fibre bearing to withstand entire hydraulic thrust water proof winding to be provide the pump set be suitable for direct coupling pump shall have suitable outylet as per manufacture design anti thrust streamlined non return valve shall be provided withpump 3 mtr submersible copper conductor cable in single/double run shall be provide each pump submersible pump 100 mm dia (with polypropylene/noryl impeller) upto 20 stage 2 HP Supply PHD PG - 44 PM 1-1-3

Supply fitting and fixing 3 crore 4 sqmm flat copper submersible Finolex/Havels make including all taxes, royalty etc all complete job as per direction of E/I P.H.E.D. Page no. 52 item no. - CB 1-3

Supply fitting and fixing lowering 50 mm dia G.L collumn pipe - do - all complete job as per direction of E/I Supply

Providing and fixing of lightning conductor finial, made of 25mm dia, 300mm long GI tube, having single prong at top, with 85mm dia 6mm thick GI base plate including holes etc. complete as required. 4.2 JSR(E&M)

Providing and fixing GI tape 20mm x3mm thick on parapet or surface of wall for lightning conductors as required ( for horizontal run) 4.7 JSR(E&M)

Providing and fixing GI tape 20mm x3mm thick on parapet or surface of wall for lightning conductors as required ( for verticall run) 4.8 JSR(E&M)

Providing and fixing testing joints, made of 20mm x 3mm thick GI strip, 125mm long with 4 Nos of GI bolts nuts check nuts and spring washer complete as required. 4.12 JSR(E&M)

GI Earth Plate Electrode : Earthing with GI plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. 2.7 metre long (but without charcoal or coke and salt complete) as required. 3.5 JSR(E&M)

Salt /charcoal for plate earth electrode: Extra for using charcoal and salt for G.I. copper plate earth electrode as required 3.7 EARCHARPL

Carriage of materials from different surface or department stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I. A Cement 30KM

B Sand 35KM

C Chips 30KM

D Metal 30KM

E Bricks 8KM

F Steel 30KM

Supply and fixing SIGNAGES MR

Supply and fixing Dust-bin including painting finishing etc, all complete. MR

Supply and fixing precast RCC bench benches including finishing etc, all complete under instruction of Engineer - in - Charge MR

Supply, Transportation & fitting of Shyan Jyoti LED Based Solar Street Lighting System Luminary: 12W LED Luminary Luminary Housing- Weather Proof Housing Structure- Hot Deep Galvanized MS Pole(4.5 Mtr.) Battery Box: Corrosion Resistant Painted Power Coated Metal Battery Box Other: Suitable Cable, Etc. Battery: 19.8Ah 14.8V Lithium-Ferro Battery of MNRE Approved Module: 75Wp of HBL/ Gautam Solar/ IEC Equivalent (Cost includes 10% CP & 5% OHC) MR

Supply fitting and fixing of standard make starter panel board with arrangement of all necessary protection including all taxes, royalty etc. all complete job as per direction of E/I NS

Supplying and fixing PVC fittings of approved make confirming to IS : 1729 including supplying nails and bobbins, fixing solutions including earth work or masonary work cutting and remaking and providilding as the case may be all complete as per specification and direction of E/I. MR PVC plain bend 100mm dia.

PVC double junction with door and ear 100mm dia.

PVC cowl - 100mm dia.

Floor trap - 100mm dia.

Ring rubber

Lubricant

Door piece

Supplying, fitting and fixing fancy wall bracket of anodised aouminium 12mm diameter pipe fixed on 3mm thick M.S. pointed plate of size 170mm x 40mm with brass bracket holder incouding fitting CFL lamp as required MR

Supplying, fitting and fixing 250 Watt HPSV lamp with complete set with choke lamp etc. as required with G.I.bracket for mounting of sodium vapors light as per directionof E/I. Including connection etc. all cost complete MR

Providing, fitting, fixing & testing of (Esential) CFL Lamp 18/20W CFL in existing battan / angle holder. (Make :- Philips / Bajaj / Crompton / Wipro) MR

Supplying and fixing flush type circular ceiling fitting complete with holder, aluminium anodized back plate and glass globeincluding connection etc. as required MR

Supply of 300mm dia 1400 rpm,230V AC Exhaust Fan (metal) exhaust fan in with double ball bearing existing opening and fittinigs as required. ( Make:-Havells-Model-Turbo Force-1400rpm / Bajaj-Item Code-70059 / Equivalent in Crompton Greaves) . MR

Labour cess @ 1%

AKASH KUMAR SINGH