Construction of officers Room under De radicalization of Central Jail Srinagar

Amount

Earthwork in excavation by mechanically / manual means over areas (exceeding 30 cm in depth, 1.5 Mtr in width as well as 10 sqm on plan) in trenches including disposal of excavated earth, as directed at site, disposed earth to be leveled and neatly dressed all kinds of soil. Including all leads lifts and all sorts of carriages of disposed earth. (Manually/ Mechanically)

Providing and laying of stone soling hand packed dry including all sorts of carriages and cost of material involved complete

Providing and laying in position cement concrete of specified grade in 1:4:8 (1 cement : 4 course sand : 8 graded stone agg. 40mm nominal size) excluding the C/o centering and shuttering all work upto plinth level including all sorts of carriages and cost of materials involved.

Providing and laying in position specified grade of reinforced cement concrete excluding C/o centring and shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone agg. 20mm nominal size) including all sorts of carriages and cost of materials involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) crushed agg. including curing complete and all sorts of carriages and cost of materials involved. complete Job

Brick work with FPS bricks of class designation 75-A in super structure upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all sorts of carriages and cost of materials involved upto site of work complete.

Providing and fixing of Pre cast cement concrete Hollow blocks above plinth level upto up to floor five level incl. Hoisting and setting in position with 1:6 cement mix cost of required centering shuttering and finishing smooth with 6mm thick plaster in 1:6 mix on exposed surface complete in M-10 G using 20mm and below aggs. Including all sorts of carriage and cost of material involved.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported kail wood.

Supplying and filling in plinth with sand / GSB under floors including, watering, ramming consolidating and dressing with all carriages from source to site of work

Reinforced cement concrete work in columns, beams, girders, bressumers, cantilevers, suspended floors, lintels, roofs and staircases, including spiral staircases, shelves, walls etc up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) inlcuding sorts of all carriages from source to site of work complete:

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, plinths, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms.

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. including all sorts of carriages and cost of material involved.

Providing 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved.

Providing and fixing panelled or panelled and glazed shutters for doors, windows, clerestory windows, including ISI marked M S pressed butt hinges bright finished of required size with necessary screws as per direction of EIC Imported kail wood.(35mm thick)

Providing and fixing 35mm thick wire gauze shutters of Imported wood, using galvanized M.S wire gauze of average width for aperture 1:4mm with wire of dia 0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S butt hinges with necessary screws.

Providing and fixing paneled or paneled and glazed shutters for doors / clerestory windows including ISI marked M S pressed butt hinges bright finished of required size with necessary screws, including paneling with 12mm thick block board with 32mm cornice both sides complete 35mm thick 1st class kail wood.

15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of materials involved.

Structural steel works welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of approved steel primer all complete including all sorts of carriages and cost of material involved.

Providing and fixing of Pre colour coated corrugated G. S. sheet roofing including vertical / curved surface with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surfac) excluding the cost of purlins, rafters and trusses. 0.50mm thick with zinc coating not less than 275gm/m2. Including all carriages and cost of material involved.

Providing ridges or hips of width 60cm overall width plain Pre colour coated G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G I limpet and bitumen washers complete. 0.50mm thick with zinc coating not less than 275gm/sqm including all carriages and cost of material involved.

Providing and fixing of 300mm x 35mm thick imported kail wood eaves boarding incl cost of nails complete.

Providing and fixing of 3-4 MM thick glass panes for window shutters including cost of beading and nails etc complete Job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red,brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

P/ laying vitrified floor tiles 60cmx60cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (as directed by the EIC at site).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with (two or more coats) on new works.

Finishing walls with exterior emulsion paint of approved brand and manufacture to give an even shade including priming coat with cement primer (two or more coats).(Apex/ Asian paint).

Providing and fixing of aluminium hardware fitting/ fixtures of standard make for doors and windows as directed by EIC.

Tower bolt 6”

Handle 5”

Tower bolt 4”

L-Drop 250mm

Providing and fixing water closet squatting pan ( Indian type) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C flushing cistern ( of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. rackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C pan of size 580x440 mm with integral type foot rests.

P/F wash basin with pedestal C.I. / M.S. brackets, 15mm C. P brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: flat back white vitreous china wash basin size 630x450mm with a pair of 15mm C. P. brass pillar taps.

Providing and fixing of water heater Gyser (25 ltrs) including cost of inlet/ outlet connection 100mm long dash fastener, making holes and refilling the same.(ISI Marked)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 course sand) with RCC top slab with 1:2:4, foundation concrete 1:4:8 mix ( 1 cement: 4 course sand : 8 graded stone agg. 40mm nominal size) inside plastering 12mm thick cement mortar 1 : 3 ( 1 cement : 3 course sand) finishing with floating coat of neat cement inside size 40x40 cm and 60 cm deep ncluidng PVC cover with frame with FPS bricks & crushed stone aggregate Including all carriages and cost of materials involved.

Providing and fixing PVC soil waste pipe of the following (nominal) dia excluding cost of holder-bats and their fixing.

PVC Pipe 100mm dia

PVC Pipe 75mm dia

Providing and fixing of 12mm thick ply wood sheets including cost of nails and scaffolding.

Providing and fixing of 12mm thick imported wooden paneling including two coats of touch wood polish complete.

Providing and fixing of 12mm thick imported wooden paneling for soffits including cost of 50mmx40mm wooden frame work of 1st class Budloo wood.

Providing and fixing of Khatamband ceiling of panch Murba type including all necessary fittings / fixtures including two coats of touch wood complete.

Providing and fixing of following size of PVC (Prince make) fitting ISI Marked.

100mm dia Plain bend

Collar 100mm dia

100mm dia Door tee

75mm dia Flow trap

75mm Plain bend

75mm dia door bend

75mm dia Collar

75x100mm reducer

Providing and fixing G I pipes complete with G I fittings including trenching, refilling, chasing etc in case of concealed work all complete.

20mm dia

15mm dia Concealed

Providing and fixing G I pipe fittings/ fixtures of required size inclusive all carriages, from source to site of work

Tanki nipple 20mm dia

15mm dia ball valve

15mm dia Union

Tanki Nipple 15mm dia

Providing and fixing C P fittings of approved brand complete JOB. (As approved by the EIC at site) Jaquar, Parko, Cera or equivalent.

PVC Connections 24”

C P Gratings

Looking Mirror

Soap Case

Waste pipe

C P Cup

C P Angle valve

C P Bib cock

C P Wall Mixer

C P Basin Mixer

Towel Rod

Providing and fixing of electric point, heating points and fittings etc. (as per approved specifications).

Lighting points

Heating points

Fan dimmer

S S Combine

MCB Box 9”x14”

MCB 6-32 Amp

MCB D. P.

M/S Sameer Fayaz

M/S BHAT SANITATION