Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹48.1 L+₹2.8 L (6.11%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹48.9 L+₹3.6 L (7.91%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹49.0 L+₹3.7 L (8.26%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹49.5 L+₹4.2 L (9.34%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
WELCOME MAINT AND REPAIR MAINT OF BR AND EM ITEMS INCL PERIODICAL SERVICES AT OFFRS MD ACCN AT RMS UNDER AGE BR II
2023_MES_597517_1
8533/C/E8
Open Tender
Civil Works
Works
270 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹90,000
21 Jun 2023
22 May 2023
12 Jun 2023
22 May 2023
10 Jun 2023
5 Jun 2023
22 May 2023 - 29 May 2023
Amount
B/R Portion Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc complete all as specified and directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and directed.
Demolition boarding any description fixed in any position with nails etc complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and directed.
Taking down shutters of any description not exceeding 1 Sqm each etc complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each etc complete all as specified and directed.
S&F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified.
M&L for block boards, 18/19 mm thick, , grade 1 quality, e x t e r i o r grade, , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed.
S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, for cup board including lipping / beading as required complete all as specified and directed.
S&F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
M&L for external teak wood lipping 6 mm thick , fixed with nails on particle board 12 mm thick etc complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry laid over and including 15mm thick screed bed in CM (1:6) and pointed in white/coloured cement to match the shade of tile etc complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry laid over and including 15mm thick screed bed in CM 1:6 and pointed in white/coloured cement to match the shade of tiles etc complete all as specified and directed.
M&L for non skid ceramic coloured tiles for skirting 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm laid over and including 15 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed.
M&L for ceramic coloured printed tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed.
M&L for coloured /light shade vitrified ceramic tiles 15mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted in neat cement slurry and pointed in white or colour cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM 1:6 and pointed in white/coloured cement to match the shade of tiles etc complete all as specified and directed.
M&L for coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished ,area of each tiles not exc 0.36 sqm matching with floor as in skirting etc and joineted in neat cement slurry and pointed in white or colour cement to match the shade of tiles, laid over and including 15 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed..
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M & L for PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in coping including necessary form work etc complete all as specified and directed.
Demolition of brick work including all quoins arches pillars etc built in cement mortar etc complete all as specified and directed.
M&L for brick work in cement mortar (1:4) using sub class 'B' bricks straight or curved on plan exc 6.0 m mean raidus etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan in any radius in half brick thick walls built in cement mortar (1:4), etc complete all as specified and directed.
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick cement plaster in cement mortar (1:6) on brick or concrete surfaces of wall surface finished fair and even etc complete all as specified and directed.
M&L for 15mm thick cement plaster in cement mortar (1:4) brick or concrete surfaces of wall surface finished fair and even with out using extra cement etc complete all as specified and directed.
M&L for 5mm thick cement plaster in cement mortar (1:3) on ceiling surfaces finished fair and even, etc complete all as specified and directed.
M&L for pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer complete as specified, supplied and fixed etc complete all as specified and directed.
S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed.
S&F second class hardwood factory made 35 mm thick plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or timber flat or size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.
S&F for second class hardwood factory made glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and directed.
S&F for second class hardwood factory made glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and directed..
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening.
S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site etc complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per Ser Item No 38 here-in-before but without glazing bar.
S&F for Chimney bars (straight or camber) bearing bars; tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and directed.
Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty and providing and fixing new ones etc complete all as specified and directed.
S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
S&F in repairs , galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.
S&F in repairs Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and directed.
S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles etc complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size etc complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size etc complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed etc complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolt 150mm long of extruded section and fixed etc complete all as specified and directed.
S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed etc complete all as specified and directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size etc complete all as specified and directed..
S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over a coat of primer etc complete all as specified and directed.
S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and directed.
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified & directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all etc complete all as specified and directed.
M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described etc complete all as specified and directed.
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer etc complete all as specified and directed.
M&L for Preparation of old decorated surfaces and appplying one coat of white wash on walls, cornices etc. complete all as specified and directed.
All as per item No 60 here-in-before but on ceiling.
Complete removal of exisitng treatment on walls all as specified and as directed.
M&L for 2 mm thick Birla white putty/JK white wall care putty on walls etc complete all as specified and directed.
M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying two coats of oil bound distemper on walls etc complete all as specified and directed.
M&L for preparation of old surfaces of walls & applying one coats of cement base paint complete all as specified and as directed.
M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil bound distemper on walls.all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying three coat wash complete all as specified and directed.
M&L for Preparation of new surfaces and appplying two coats of white wash on ceiling, cornices etc. complete all as specified and directed.
M&L preparation of new surfaces of walls & applying two coats cement base paint over a coat of primer complete all as specified and directed.
M & L for writing letter for figures (block, Roman, italic or indian) n exc 30 CM high with thick synthetic paint with out bursh marks, if necessary repainted until the desired result is obtained etc complete all as specified and directed.
S&F in repair 15mm bore long body bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated fancy type etc complete all as specified and directed.
S&F in repairs Pillar tap with aerator, cast copper alloy with, chromium plated, fancy type, screwed down with high pressure, with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore dia of pipe. Make : Cera Cat No QT F2006101 or equivalent in Hindware/Parryware.
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing etc complete all as specified and directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc complete all as specified and directed..
S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in wallsetc complete all as specified and directed.
S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls etc complete all as specified and directed.
S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair etc complete all as specified and directed.
S&F in repair CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair etc complete all as specified and directed.
S&F in repai brass CP shower rose 100mm size with swivel joint fixed in repairs etc complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 ltrs capacity incl flush pipe complete fixed in repairs etc complete all as specified and directed.
M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed.
S&F in repairs Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
M&L in repair Wall Mounted Cabinet Mirror Cabinet, Ptmt ; Material. PTMT size 450x350mm complete all as specified and as directed Make - Prayag or equivalent as approved by GE.
S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed in repairs etc complete all as specified and directed.
S&F in repair PVC connection pipe 15mm bore 450mm long etc complete all as specified and directed.
S&F waste pipe 750 long for WHB or sink in repairs etc complete all as specified and directed.
S&F in repair vitreous china white wash hand basin flat back size 550x400mm etc complete all as specified and directed.
S & F in repair 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, etc complete all as specified and directed.
M & L for cement concrete type D-2, (1:4:8), using 40mm graded stone aggregate as in fillings for sunken portion and mass concrete etc complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar/concrete 75 /110 mm dia fixed in position etc complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls etc complete all as specified and directed.
All as per Ser item No 94 here-in-before but bore of pipe 75 mm dia fixed to walls.
S&F(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door etc complete all as specified and directed.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore etc complete all as specified and directed.
S & F 110 mm dia PVC (SWR) vent cowl complete all specified and as directed.
All as per Ser item No 98 here-in-before but bore of pipe 75 mm dia fixed to walls.
S&F PVC (SWR) bends 110mm bore of any radius with access door etc complete all as specified and directed.
S & F in repair stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs etc complete all as specified and directed.
Supply and fixing in repair stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as 'specified and as directed.
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4, Type B-0 (using 12.5mm graded stone aggrefate) as in sub base of floor complete all as specified and directed
S&F 0.63 mm galvanized, corrugated mild steel sheeting with tow corrugated side lap, fixed with wall screws and washers in roof, wall etc wire grade of zink coating 275 complete all as specified and directed.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
(a) One light/ Bell Point controlled by one way switch .
(b) One Exh/Ceiling fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 108 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 6 Amp.
M&L for Socket outlet, 2 in 1, 3 pin 5A flush type
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type
M&L Switch socket combination 2 in 1, 6A/16A, 5 in 1 flush type
M&L for Bell push 6A
M&L for bell AC 230 volts musical type
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.
M&L for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
M&L for 10 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl taking down old unsv holder complete all as specified and as directed.
M&L for LED lamp 9 Watt suitable for lamp holder fittings complete all as specified and as directed
M&L for decorative wall light fixture made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old UNSV complete all as specified and directed.
Supply and fixing for Bed side light 3 Watt LED light reading in bed just got easier with this colletion of adjustable LED bedside lights complete all as specified and as directed.
M&L for replacement LED 1x25W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed.
Repair/Replacement for Modular Switch 1 way 6A,1 module
Repair/Replacement for Modular Switch 2 way 6A,1 module
Repair/Replacement for modular switch 1 way 16A, 1 module
Repair/Replacement for Modular Socket ,6A/2/3 pin combined 2 module
Repair/Replacement Modular Socket ,6A/16A-2/3 pin combined 2 module
Repair/Replacement for modular Bell push 1 Way 6A 1 Module
Repair/Replacement for stepped type electronic fan regulator,120 W-2 module
Repair/Replacement for modular white cover plate with frame 1/2 module complete all as directed.
Repair/Replacement for modular white cover plate with frame 3 module complete all as directed.
Repair/Replacement for modular white cover plate with frame 6 module complete all as directed.
Repair/Replacement for modular white cover plate with frame 8 module complete all as directed.
Repair/Replacement for Metal flush box 1/2 module complete all as directed.
Repair/Replacement for Metal flush box 3 module complete all as directed.
Repair/Replacement for Metal flush box 4 module complete all as directed.
Repair/Replacement for Metal flush box 6/8 module complete all as directed.
M&L for sub main wiring Casing caping two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one length etc complete all as specified and directed.
M&L for VTPN DPX 4 way,double door 415 Volts, 50 Hz, IP 43 IK 09 sheet steel, powder painted, with 02 neutral link & 02 earth bar and cable ties for cable management suitable for fixing of MCCB as incomer and MCB SP/TP as outgoing MCB DBs incl taking down of old UNSV DBs complete all as specified and as directed.Make : Legrand/ABB/Siemens
M&L for MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA taking down old unsv MCB complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.
All as per ser item No 143 here-in-before but SPN 4 Way complete all as specified and as directed.
All as per ser item No 143 here-in-before but SPN 2 Way complete all as specified and as directed.
M&L for in Replacement of MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed.
M&L for MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
Repair/Replacement for piano switch single pole 5A, one way complete all as specified and as directed.
Repair/Replacement for switch socket combination 6 Amps 5 pin , 230 volt flush type complete all as specified and directed.
Repair/Replacement for switch socket combination 16 Amps 5 pin 230 volt flush type complete all as complete all as specified and directed.
Repair/Replacement for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and directed.
Repair/Replacement for fan regulator 100/120 watt step type AC 220 volt complete as complete all as specified and as directed.
M&L for spray painting to existing meter panel board after preparation of old painted surfaces (Inner & outer) with appling 01 coat red oxide 2 coats of synthetic super enammelled paint n.exc complete all as specified and as directed.
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
MS SADHNA RAHUL
VIHUTO YEPTHO
Shri Atoshe Tuccu
TOSHIKA SUMI
M/S Lucky Builders
SHRI MADAN SINGH
CHANDRADEO PRASAD
Ms ARENKOKLA CONTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .