Mtc. Of E.I. in NRB at Chandigarh. (AMC of EPABX system installed for lifts and sub stations at Punjab and Haryana High Court, Sec-1, Chandigarh).

Comprehensive Annual Maintenance Contract of EPABX communication system capable of covering various P&T line & normal lines with the detail as below.

EPABX communication system capable of covering 4 P&T line 32 normal Extn. The make of EPABX System is Alkatel installed for lift in Pb. & Hry. High Court Sec 1 at Chd.

Supply, erection, testing and commissioning of 4 pair FRLS PVC insulated annealed copper conductor, armored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. The cable shall be laid building in air with the help of supporting sheathed steel wire/ GI wire. The job includes all labour and petty material required to complete in the job in entire satisfaction of EIC.

Supply and erection of electronic push button telephone set of Beetel make.

Supply and erection of 12 volt 17/18 Ah battery lead of suitable length. The job includes all labour and petty material required to complete the job to the entire satisfaction of EIC. Make; Exide/Luminous/Amron only.

Supply, erection, testing, commissioning of Unify HP 120 Digital key Telephone systems, 24 No. keys programmable dupex phone, 12 line affable display systems

DSR Item No. 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

DSR 39.18 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.

1 run of cable

Please Enable Macros to View BoQ information