Repairs to roof, plaster, brickwork, false ceiling, joinery and rain water gutters in JCO Qtrs, MES Qtrs and certain bldgs at Mil Stn Bhusawal under GE (South) Ahmednagar

Amount

Dismantling of single layer mangalore pattern or similar tiles in roofing including ridge tiles complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof coverings including ridges complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and as directed.

Dismantling of battens for tiles, shingles etc. of any size including tilting fillets spaced exc 15 cm complete all as specified and as directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed.

Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

Dismantling of wrought or mild steel work of any description not otherwise provided for in any position complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & as directed.

Taking down shutters exceeding 1 and not exc 2 Sqm each complete all as specified & as directed.

Taking down plaster of any description on brick stone wall etc , including raking out joints, hacking for key scrubbing down with water etc completed all as specified and directed

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for second class hard wood in scantling, wrought, fixed in position complete all as specified and as directed.

M&L for clean sawn, second class hardwood battens for tiles, exc 5 and not exc 15 sqcm, fixed at 30 cm centres, complete all as specified and as directed.

All as per serial item No.14 here-in-before but fixing only. Note :- Old retrieved battens obtained from Item No 5 shall be reused.

M&L for 15mm thick, second class hard wood boarding, planed one side with edges tongued and grooved or rebated, as in eaves board/ barge board etc. complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fixed in position complete all as specified and as directed.

S&F 200mm size, aluminium anodised tower bolt of extruded section complete all as specified and as directed.

S&F 300 mm long, aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100 mm size,mild steel butt hinges, medium weight, colled rolled, ISI marked and fixed, complete all as specified and as directed.

S&F 150mm size, extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S &F in repairs, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples fixed to wooden / steel frames, complete of specified and directed

S&F mild steel work as in wind ties for roof sheets, including securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F mild steel framed work as in framed guard bars; barred iron doors and similar work con forming to Fe.290.Gde-E-165 hung as gates, including pintle hinges, stops, hand made sliding bolts etc. complete all as specified and as directed.

S&F mild steel work as in bands, straps, support for rain water pipes etc conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

S&F mild steel, plain, black sheet in wall cladding, steel gates and similar work 1 mm thick, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters: purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates, conforming to Fe 410-W(Gde-E-250) quality-A, complete all as specified and as directed.

S&F factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and as directed.

M&L for galvanised corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275, complete all as specified and as directed.

All as per serial item No. 30 here-in-before but except sheets

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of colour and design as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour and design as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws all as specified and as directed.

S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

S&F 6 mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

M&L for roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed .

All as per serial item No.36 here-in-before but except tiles.

M&L for ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6, complete all as specified and as directed.

All as per serial item No. 38 here-in-before but except tiles.

S&F in repairs, 4mm thick Non-asbestos fibre cement building board as in ceiling (Decorative type) including two coats of oil bound distemper over a coat of chalk whiting all as specified and as directed.

M&L in repairs for anodised aluminium snap grid framework for false ceiling, size of grid 605 x 605 mm, including 4mm dia GI wire hangers at 1.2m centres, 4mm thick, non asbestos fibre cement building boards (decorative type), fixed or laid/ inserted to aluminium framework/grid, preparation of surfaces of ceiling borards and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

M&L in repairs for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed..

M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed

M&L for 10 mm thick rendering in CM 1:6 on other than fair faces of brick work, finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15 mm thick rendering in cement mortar 1:4 in two coats (10 mm + 5 mm) on fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonary surfaces or other than fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and as directed.

M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of tiles battens any size and spacing, and teated all over (measured overall on one side only, spaces not deducted) with creosote complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality of description ), from wooden / steel frames stone concrete or brick surrounds glazed putty or fixed with beads including punching or drilling out old glazing pines/ spring clips complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality & glazing with oil putty or wooden beading in squares n exc 0.50 sqm each pane complete all as specified and as directed

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs 110mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F, in repairs, 110mm bore PVC (SWR) single socketed in any length with rubber ring joints and fixed to walls all as specified and as directed.

S&F, in repairs, 75mm bore PVC (SWR) single socketed in any length with rubber ring joints and fixed to walls all as specified and as directed.

S&F, 110 mm bore (SWR) PVC bends any radius complete all as specified and as directed.

S&F, 75 mm bore (SWR) PVC bends any radius complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement motor bedding, removing unserviceable tiles removing the rubbish off the premises complete all as specified and directed

15 mm thick rendering in in two coats (10+5 mm) CM 1:4 on brick work finished fair and even complete all as specified and directed

Bhirud Electric Stores

M/S JAI BHAWANI CONSTRUCTIONS

M/S H.N.ENTERPRISES