Construction of New building for Fire and Rescue Services Station with development works at KOTTUR in Thiruvarur District

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

b) 2 to 3 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0001) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

EQ0041.a) Providing Granular Sub base with Graded materials of Table : 400-1 sand plant mix method

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0013) Supply and filling in foundation and basement with gravel (including Tax collected by Govt. Per Cum)

FL0115) Supplying and laying of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges and Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness with compaction by earth rammer and laying of 83mm thick Paver block

C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly

C0029) Plain cement concrete 1:2:4 for foundation and basement and other similar works using 20mm gauge HBSJ with Admixture

C0030) Plain Cement Concrete 1:8:16 for foundation and other similar works using 20mm Gauge broken brick jelly

C0035) Plain cement concrete 1:3:6 for foundation using 20mm gauge hard broken stone jelly with Admixture

C0035.a) Plain cement concrete 1:3:6 for foundation using 40mm gauge hard broken stone jelly with Admixture

CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

C0038) Providing and laying in position, Standardised Concrete Mix M-20 Grade a) In Foundation and Basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

C0013) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete a) Providing Pit

b) Augering 30cm dia

CS0039) Supplying and Fixing of fibre mixed precast slab of 50mm thick of all required shapes made in C.C 1:3:6

C0021) Providing Rain water Harvesting well ring circular shape of 90cm dia, 60cm depth, 50mm thick using M20 grade concrete including steel fabrication

B0049) Brick Partition wall in Cement Mortor 1:4, 70mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) with admixture a) In Ground Floor

b) In First Floor

B0051) Brick partition wall in Cement Mortor 1:4 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) with admixture a) In Ground Floor

b) In First Floor

B0016) Brick Work in Cement Mortor 1:5 using fly ash bricks of size (23x11x7cm) with Admixture in foundation and basement

B0027) Brick Work in Cement Mortor 1:6 using fly ash bricks of size (23x11x7cm) with admixture a) In Ground Floor

b) In First Floor

c) In Second Floor

B0054) Brick Partition wall in Cement Mortor 1:4, 110mm thick for super structure using fly ash bricks of size (23x11x7cm) with Admixture a) In Foundation and basement

b) In Ground Floor

c) In First Floor

FL0003) Supplying and fixing of 20mm thick bituminous expansion joint filler pad

FL0108) Flooring with a bed of cement concrete 1:5:10 using 40mm size hard broken stone jelly

FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

FL0049) Supplying and fixing of colour glazed tiles over cement plastering in Cement mortar 1:2, 10mm thick with Admixture

FL0110) Supplying and laying of Ceramic tiles (Anti skid) over Cement mortar 1:3, 20mm thick with Admixture

FL0123) Providing double nosing to the edges of granite slab

FL0118) Supplying and laying of Stain free Nano polish Vetrified tiles of best approved quality 600x600x8mm for flooring and other similar works in C.M 1:3, 20mm tk with Admixture

FL0028) Supply and laying superior variety concrete designer tiles for flooring in CM 1:3, 20mm thick with Admixture

FL0136.a) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

f) For Curved Surface

g) Double centering portico area

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

PL0006) Plastering with Cement mortar 1:4, 12mm thick with Admixture

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

PL0012) Plastering the Top of flooring in C.M 1:3, 12 mm thick mixed with WPC

PL0015) Plastering for border in CM 1:5, 12mm tk a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032) Supplying and applying of wall putty one coat with approved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0027) Providing wooden (Melamen Door) Polish for new wood by removing by blade scrapping the exisiting dirt from the wooden surface

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0017) Supplying and fixing of 4mm thick pin headed Glass panels

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0045) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JW0044) Supplying and Fixing in position of UPVC Sliding window Two Track

JD0095) Supplying and fixing of WPC Solid door shutter with frame extruded with size 75mmx50mm

JD0028) Supplying and fixing of Best Indian T.W. single leaf door shutters using 9mm thick phenol bonded BWR grade plywood shutters with brass screws Suitable for door of size a) 900 x 2400 mm

JD0005) Supplying and fixing of Single leaf Teakwood Panelled door shutters without brass fittings Suitable for Door of size a) 900 x 2400 mm

JD0006) Supplying and fixing of Single leaf Teakwood Panelled door shutters without brass fittings Suitable for Door of size a) 1200 x 2400 mm

JD0007) Supplying and fixing of Double leaves Teakwood Panelled door shutters with brass fittings Suitable for Door of size a) 1800 x 2400 mm

JD0062) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size a) 900 x 2400 mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase (304 L Grade)

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

CS0013) Supplying Cuddappah slab of 20mm thick and laying, finishing with two sides for cupboard, ward-robes shelves and other similar works I. 20mm thick a) In Ground Floor

b) In First Floor

CS0015) Supplying Cuddappah slab of 40mm thick and laying, finishing with two sides for cupboard, ward-robes shelves and other similar works II. 40mm thick a) In Ground Floor

FL0080) Supplying and fixing of Granite slab of size 4' x 2' 18-20mm tk (Synthetic Grey, Paradise and similar varieties) for flooring in cm 1:3, 20mm tk with admixture using crushed stone sand

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

JD0094.a) Providing T.W.single leaf shutters for cupboard/ward robes each rack with 9mm thick phenol bonded BWR grade plywood (For Rest Room)

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

SA0073) Supply & fixing of CI Steps (not less then 5 Kg each)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0007) Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls

SA0122.I) Supplying, laying and jointing the following dia of UPVC Pipes Above Ground Level a) 32mm dia UPVC pipe

b) 25 mm dia UPVC pipe

WS0006.I) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D-1785 fully concealed in walls c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

GR0028) Supplying, fabrication and fixing in position of required dia MS pipe with 3.6mm thick including cost of all materials and all labour charges

WS0199) Drilling of borewell anywhere including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand a) Upto 76m depth ending below ground level

b) From 76m upto 91m depth ending below Ground level

c) From 92m upto 107m depth ending below Ground level

d) From 107m upto 122m depth ending below Ground level

WS0259) Reaming 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60 m depth ending below ground level

WS0150) Labour charges for inserting 150 mm dia PVC Casing pipes assembly (With slots or without slots)

WS0148) Supply and delivery of 150mm dia of PVC casing pipes a) 150mm dia PVC Pipe (Ribbed Screen pipe)

b) 150mm dia PVC Pipe (Casing Medium Depth)

WS0262) Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours)

WS0240) Supply and fixing of 160mm dia PVC end cap for borewell top cover

WS0231) Supplying and fixing of the 150mm dia MS Borewell clamp set

WS0264) Supply and delivery of 2 HP Open well Submersible pump set Duty - 75 lpm x 25m

WS0054) Supply and delivery of 2 HP single phase Submersible pump set Duty - 15 lpm x 100m

WS0173) Supply and delivery of 2 HP single phase panel board with two level guard and auto start of Direct online starter

WS0246.a) Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable

WS0235) Supply and delivery of required dia nylon rope

SA0122) Supplying, laying and jointing the following dia of UPVC Pipes below Ground Level a) 32mm dia UPVC pipe

WS0242) Supplying of 40mm dia cast iron adopter

WS0024) Supply and delivery of following dia PVC pipes a) 50mm dia PVC Pipe 10 Kg/cm2

SA0122) Supplying and delivery of following dia UPVC pipe a) 40mm dia UPVC pipe

SA0192) Supplying and fixing of following dia PVC/UPVC special a) 50mm dia UPVC Coupling

b) 50mm dia UPVC Elbow

c) 50mm dia UPVC Bend

d) 50mm x 40mm dia UPVC Reducer

e) 40mm x 32mm dia UPVC Reducer

f) 63mm x 20mm dia PVC Saddle piece

WS0018) Supply and fixing of following dia GI/GM/CI Specials of best approved quality, with ISI mark a) 50mm dia GM Gate valve

b) 40mm dia GM Gate valve

c) 50mm dia GM Non-Return valve

d) 50mm dia CI Foot vave with stainer

e) 20mm dia GI Union

f) 20mm dia GM Gate valve

g) 20mm dia GM Ferrule

h) 50mm dia GI Stop cock

i) 50mm dia GI Bend

WS0017) Supplying and delivery of following dia GI Pipe 'B' class a) 20mm dia GI Pipe

b) 40mm dia GI Pipe

EL0290.a) Supplying and fixing of MS angle of size 50x50x5mm MS angle to hold LTUG cable in OH portion

WS0015) Supply and laying of following dia G.I pipes Above ground level a) 50mm dia GI Pipe

WS0016) Supply and fixing of following dia G.I pipes Below ground level a) 50mm dia GI Pipe

EL0208) Supply and Run off main with 4 wires of 10 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0340) Supplying and clamping of 3.5 core of 25 Sqmm PVC armoured LTUG cable on post or wall (above GL)

EL0339) Supplying and laying of 3.5 core 25 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15 m layer of sand (Below Ground level)

EL0342) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 25 Sqmm Brass cable gland

EL0344) Supply and providing cable end termination of following PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 3.5 core of 25 Sqmm PVC Armoured ALTUG cable end termination

EL0341) Labour charges for laying of PVC aluminium armoured LTUG cable on post and wall to make good Above Ground level

EL0258) Supply and fixing of Single Pole & Neutral 6A to 32A, 10KA MCB including cost of all materials, labour charges and erection charges etc.

EL0242.a) Supply and fixing of 900x700x250mm tk EB service panel for 415 volt, 3 phase, 4 wire 50 HZ power distribution system

NL0005) Supplying and fixing in position of Aluminium die casting TNPHC Emblem a) 60 cm TNPHCL Emblem (24")

NL0006) Supplying and fixing of following size Aluminium dye casting lettering and numbering a) 12" Aluminium Dye casting letters

NL0007.a) Supplying and fixing of plastic name board of required size with Stikness cut in computer to the depth cost & fixing charges

MS0057) Supplying and delivery of following Godrej / Equivalent Navtal Lock a) 6 Levers - 3 Keys Lock

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0013) Supplying and fixing of approved brand Porcelain Flat Back urinal

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SA0039) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings

SA0045) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum water seal of 50mm

SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm In Ground floor.

SA0020) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580mmx440mm (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0052) Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

SA0053) Supplying and fixing of following dia PVC Equal tee a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Equal Tee

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements a) 600mm x 600mm

b) 300mm x 300mm

MS0002) Supplying and fixing of 20mm dia Aluminium Hanger Rod to the required length

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

EL0001) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type wall socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying and fixing of 9 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0072) Supplying and fixing of 12 Watts LED Bulb for Bulk head fittings

EL0123) Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting

EL0123.a) Supplying and fixing of LED ceiling lamp surface Panel 50W of size 300mmx300mmx35mm

EL0123.b) Providing 6 Metre Length Single Bracket Pole with Base Plate (250x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length GI pole arrangements at the scheme road area

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Supply and Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0202) Supply and Run off main with 4 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable

EL0252) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0163) Supply and fixing of 32 Amps triple pole main switch with fuse and neutral link

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0311) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4 P MCB as incoming and 18 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only. Lower End

EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

NL0001) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

GR0053) Supplying and fixing in position of colour Galvalume sheet of 0.47mm thick inclusive of overlap length

EL0229) Supplying and fixing 3 Nos. of 100 amps 500 volts grade porcelain Fuse unit

SA0155) Supplying and fixing of CP Two Way Bib Cock with Health Faucet approved quality with ISI mark

Please Enable Macros to View BoQ information