Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.4 LAccepted-AOC H NO 90 VILLAGE REWLA KHANPUR PO NAJAFGARH NEW DELHI 110043 | NEW DELHI | WEST DELHI | DELHI | 110043 | ₹65.4 L Quoted ₹67.4 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹68.9 LRejected-Finance A 3 257 JANAKPURI NEW DELHI 110058 | WEST DELHI | DELHI | 110058 | ₹68.9 L | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹69.6 LRejected-Finance | ₹69.6 L | L3 | Rejected-Finance Not being L1 |
| 4 | L4₹70.0 LRejected-Finance | ₹70.0 L | L4 | Rejected-Finance Not being L1 |
| 5 | L5₹77.4 LRejected-Finance | ₹77.4 L | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | High Tech Metal India L3 | Ish Engineers and Contractors L1 | Ashish Sehgal and Co. L4 | Parveen Builders L5 | M/S Satyam Associates L6 | P R Constructions L7 | M/S ADHIKARI CONSTRUCTION CO. L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge. | 20 | Cum | 100 ₹2,000 | 50 ₹1,000 | 100 ₹2,000 | 100 ₹2,000 | 109 ₹2,180 | 199 ₹3,980 | 99 ₹1,980 |
| 2.00 | M & L, Brick work with sub class 'B' bricks , straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge. | 20 | Cum | 3,500 ₹70,000 | 50 ₹1,000 | 3,250 ₹65,000 | 3,500 ₹70,000 | 3,900 ₹78,000 | 3,299 ₹65,980 | 1,999 ₹39,980 |
| 3.00 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by Engineer-in-Charge | 600 | Sqm | 10 ₹6,000 | 5 ₹3,000 | 10 ₹6,000 | 20 ₹12,000 | 9 ₹5,400 | 9 ₹5,400 | 9 ₹5,400 |
| 4.00 | M&L for glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge. | 375 | Sqm | 510 ₹1.9 L | 599 ₹2.2 L | 520 ₹1.9 L | 650 ₹2.4 L | 599 ₹2.2 L | 749 ₹2.8 L | 549 ₹2.1 L |
| 5.00 | M&L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in charge. | 50 | Sqm | 510 ₹25,500 | 599 ₹29,950 | 550 ₹27,500 | 650 ₹32,500 | 599 ₹29,950 | 699 ₹34,950 | 599 ₹29,950 |
| 6.00 | M&L for Viritified Ceramic tiles, 10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified. | 150 | Sqm | 700 ₹1.1 L | 899 ₹1.3 L | 749 ₹1.1 L | 800 ₹1.2 L | 799 ₹1.2 L | 799 ₹1.2 L | 899 ₹1.3 L |
| 7.00 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed by the Engineer in Charge. | 1,500 | Sqm | 10 ₹15,000 | 10 ₹15,000 | 5 ₹7,500 | 10 ₹15,000 | 9 ₹13,500 | 9 ₹13,500 | 9 ₹13,500 |
| 8.00 | M&L for Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed by the Engineer-in-Charge. | 500 | Sqm | 140 ₹70,000 | 90 ₹45,000 | 149 ₹74,500 | 120 ₹60,000 | 99 ₹49,500 | 179 ₹89,500 | 99 ₹49,500 |
| 9.00 | Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. | 150 | Sqm | 140 ₹21,000 | 80 ₹12,000 | 139 ₹20,850 | 120 ₹18,000 | 110 ₹16,500 | 139 ₹20,850 | 99 ₹14,850 |
| 10.00 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3 % by weight of cement, , finished even and smooth without using extra cement, complete all as specified.
Note - WPC shall be measured & paid separately. | 850 | Sqm | 140 ₹1.2 L | 80 ₹68,000 | 149 ₹1.3 L | 120 ₹1.0 L | 120 ₹1.0 L | 189 ₹1.6 L | 99 ₹84,150 |
Updated dates
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
9 Mar 2026, 6:00 pmClosed
Col L Suvarna CWE
HQ CWE AF Gurgaon
INTEGRATED COMPLAINT MANAGEMENT SYSTEM FOR DAY TO DAY COMPLAINTS AND COMPREHENSIVE MAINTENANCE IN FARIDABAD STATION UNDER AOR OF GE (AF) FARIDABAD
2026_MES_752561_1
CWE/GGN/FT-73/2025-26
Open Tender
Civil Works
270 days
AF Stn Faridabad
As per NIT
8 documents required · 8 mandatory
₹1,000
GE AF Faridabad
₹2.0 L
Yes
30 Mar 2026
13 Feb 2026
11 Mar 2026
13 Feb 2026
9 Mar 2026
24 Feb 2026
13 Feb 2026 - 23 Feb 2026
Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge.
M & L, Brick work with sub class 'B' bricks , straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by Engineer-in-Charge
M&L for glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.
M&L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in charge.
M&L for Viritified Ceramic tiles, 10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified.
Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed by the Engineer in Charge.
M&L for Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed by the Engineer-in-Charge.
Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3 % by weight of cement, , finished even and smooth without using extra cement, complete all as specified. Note - WPC shall be measured & paid separately.
Preparation of new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed by the Engineer-in-Charge.
Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening , complete all as specified and directed by the Engineer-in-Charge
Preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed by Engineer –in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer in Charge.
Plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block ,coping , cills, steps etc , complete all as specified and directed by Engineer-in-Charge.
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.
S&F 20 mm bore ,CPVC medium grade , with all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed.
Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutters) complete all as specified and directed by Engineer-in-charge.
Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutters) complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.
S&F, Factory made, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commertial type on both sides, fitted to chowkhats of 2nd class hard wood (hollock) , complete all as specified and directed by Engineer-in-charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65 x150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.
S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.
M&L, Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steek sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge
S&F Aluminium handles ,plate cast type anodised of 150 mm size , complete all as specified and directed by Engineer-in-Charge.
S&F, Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge
S&F Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge
S&F, Butt hinges medium weight cold rolled steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer in Charge.
S&F, Aluminum alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge
S&F mild steel Mortice lock, vertical type, size 100 mm complete all as specified and directed by Engineer-in- Incharge.
S& Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge
Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and directed by Engineer-in-Charge
S&F for rotational moulded polyetheylene water storage tanks (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20mm dia ball float valve with aluminium fiting, GI nipple any fitting incl dismantling exising water tank complete all as specified and directed
S&F for rotational moulded polyetheylene water storage tanks (cylindrical vertical with closed top) of 1000 ltr capacity, hoisted and fixed in any position incl 20mm dia ball float valve with aluminium fiting, GI nipple any fitting incl dismantling exising water tank complete all as specified and directed
Dismatling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. (WITH SEMI PERFORATED 12MM THICK MICRO TEGULAR EDGED GRG FALSE CEILING TILES)The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.
S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing .
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S&F in repair aluminium(Die cast)body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F 4.0 mm thick Sheet glass, ordinary quality and glazing in square area not exceeding 0.5 sq. m in each pane for aluminium door /window shutter complete all as specified and directed by Engr-in -charge.
S&F 4.8mm thick Sheet glass, ordinary quality and glazing in square area exceeding 0.5 sq. m in each pane for aluminium door /window shutter complete all as specified and directed by Engr-in -charge.
S&F 12 mm thick Pre laminated exterior grade both side laminated board decorative choice lamination fixed with screws to timber frame work /aluminium frame complete all as specified and directed by Engr- in - charge.
Dewatering ,cleaning and removal of all scale ,dirt etc froPVC tanks,capacity500&1000 Ltrs by using following:- (a) Dewatering and cleaning with mechanized process.(b) Scrubing all internal surface of tank by steel wool with using specialized solution like swipe pro etc to remove all scale and dirt. ( c) Clean all Scales and dirt by using vaccum cleaner. ( d) Finally clean the tank and mouth of circulating pipes etcwith clean water .Marking with white paint on tank 'Date of cleaning water tank; Complete all as specified and directed.
S&F PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed in repair, complete all as directed by Engineer in Charge
S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and hidhg density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repair. (Min Wt 20mm - 210 gms)
S&F, Plastic water closet seat white closed pattern with flat bottom and over and mild steel chromium plated or aluminized hinging device , fixed as in repairs,complete all as specified and directed by the Engineer in Charge.
S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.
Supply only Internal water proofing compound.
Taking down existing water proofing treament any nos of layers and of any description, incl.demolition and taking off PCC padding/plaster on RCC slab,also including removing of bitumen coating to show the concrete surface to its true colour and roughening etc and also removing the debris outside the MOD land complete all as specified and directed by Engineer-in-Charge
Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 including macthing existing surfaces complete all as specified and directed by Engineer-in-Charge.
M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) on roof padding avg. thickness of 40 mm in slope finished even and fair complete all as specified and directed by Engineer-in-Charge.
M & L for 15 mm thick Screed bed in cement mortar 1:3 mixed with integral water proofing compound as per manufacturers instrustruction complete all as specified and directed by Engineer-in-Charge. (Note: Water proofing compound measured sesperatly.
M & L for laying APP modified membarane with non woven polyester reinforcement mat (concrete core) not less than 3 mm thick & not less than 3.5 kg /sqm, the over the lap otching shall be 100 mm on length side & 100 mm on widthe side over a tack coat of Industrial bitumen of 1.20 kg / Sqm over Bituminious based primer IS No. 3383@ 250 gms/sqm including apply of Aluminium colour synthetic enamel paint @ 200 gms/sqm all as per manufacture's instruction complete all as specified and directed by Engineer-in-Charge. Note: Supply only integral water proofing compound shall be measured and paid separately.
Supply only Butt hinges medium Stainless steel of 75 mm size and fixed ,complete all as specified and directed by the Engineer in Charge.
Supply only Butt hinges medium Stainless steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer in Charge.
S & F wildh of flaps(when open) in 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by the Engineer in Charge.
S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by the Engineer in Charge.
S&F overall length of cover plate 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and directed by Engineer-in-Charge
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grained printed colour Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F, Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed by Engineer-in-Charge.
Dismantling of stone slabs & pavers blocks/tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified.
M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in cement mortar (1:4) and jointed complete all as specified and directed
S&F, Stop valve/ Angle valve 15 mm dia, Chromium plated brass, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair , complete all as specified and directed by Engineer-in-Charge.
S&F, Stop valve/ Angle valve 15 mm dia, PTMT, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair , complete all as specified and directed by Engineer-in-Charge.
S&F in repair ,15 mm bore, Brass CP mixer for wall for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair ,Vitreous china bowl urinal flat back, size 465X355X265 mm white (minimum), with grating and union for discharge pipe(excluding flushing cistern,flush pipe),but including waste pipe, complete all as specified and directed.
S&F, Pillar taps, 15 mm bore Chromium plated brass, fancy type, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe fixed as in repair, complete all as specified and directed by the Engineer in Charge.
S&F in repair Pillar taps of PTMT fancy type any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms)complete all as specified and directed by the Engineer in Charge.
S&F, Bib tap fancy type long body, Chromium plated brass, 15 mm bore dia, screwed for iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge.
S&F, Bib tap standard of PTMT ,15mm bore dia of any colour high pressure screwed for iron pipe and fixed as in repair (minimum weight 90gms) ,complete all as specified and directed by Engineer-in-Charge.
S&F, Chromium plated brass shower rose 125 mm bore of rim with swivel joint fixed as in repairs , complete all as specified and directed by Engineer-in-Charge
Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts and including new brackets fixed as in repair , complete all as specified and directed by the Engineer in Charge.
Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair ,complete all as specified and directed by the Engineer in Charge.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed.
S&F, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed in repair , complete all as specified and directed by the Engineer in -Charge. MAKE - PARYAG / PEARL or Equivalent to makes mentioned in Approved Makes List
S&F, PVC connection of PTMT ,non corrosive with nuts and washers on both ends, 450 mm long suitable for 15 mm bore fixed in repair , complete all as specified and directed by the Engineer in -Charge
S&F Towel rail 600mm long of PTMT fixed withand including chromium plated brass screws and wooden /Plastic cleats(of approved shade) fixed as in repair , complete all as specified and directed by the Engineer in Charge.
S&F in repair Tubular towel rail, Brass cromium plated 20mm dia, D type, 60cm long between flanges complete all as directed and specified.
S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as directed and specified
S&F in repair, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.
S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips providing and fixing new one , complete all as specified and directed by Engineer-in-Charge.
S&F, Sheet glass 4.0 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares exceeding 0.5 Sq. m in each pane, complete all as specified.
S&F, Figured sheet glass 5.00 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.
S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty,including taking down old floor spring hydraulically, complete all as specified and as directed by Engineer-in-Charge.
M&L for providing precast cement concrete (1:2:4 type B0 using 12.5mm graded stone aggregate) louvers and jallies, 40mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 all as specified (Pre cast frame shall be measured separately).
M&L for 75mm PCC 1:4:8 type D2 using 40 mm graded stone aggregate in sub base.
M&L for sand cushioning for laying of inter locking tiles (paving blocks) all as directed by Engineer-in-charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments all as directed by Engineer-in-Charge.
S&F Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M&L Chequered cement concrete tiles30cmx30cmx25mm thick, set jointed and pointe in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in side of path / benching / coved fillets etc rounded or chamfered on edges.
M & L for 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified.
Supply & fix in repairs , stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet , of size 90 cm x 60 cm x 25 cm with all internal fittings of appoved make complete all as specified & directed.
S&F in repair 100 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall
S&F in repair of 110mm dia PVC (SWR) bends
S&F in repair 75mm PVC(SWR) bends any radius with access door.
S&F in repair of 75 mm dia PVC (SWR) Vent cowl
S&F in repair of 100 mm dia PVC (SWR) Vent cowl
S&F in repairs for 100 mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed
S&F in repair PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.
S&F in repair grating doom 100mm dia with waste hole of PTMT (Min wt 25gms).
S&F in repairs CP wall mixer (3 in 1) 15mm complete all as specified and directed by Engr-in-charge
S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed.
S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.
S & F in repairs waste coupling of PTMT (half or full threaded) 40 mm dia ,complete all as specified and as directed.
M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1 mm thick all as specified and as directed.
M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper all as specified and as directed.
M&L for two coat of cement base paint on old decorated plastered surface of wall including complete removal of existing treatment & preparation of surfaces complete all as specified and directed by Engineer in Charge
M&L for one coat of cement base paint on old decorated plastered surfaces of wall including washing rubbing down stopping & preparation of surfaces complete all as specified & directed by Engr-in-charge.
M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints or equivalent in mAkes mentioned in list of Approved Makes over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine as specified and as directed.
M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints or equivalent in Makes mentioned in list of Approved Makes over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine as specified and as directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as directed and specified.
S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S & F Pre-painted galvalume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S & F for rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A all as specified and directed.
S&F mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240.
M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and directed. Note:- Payment for providing grooves shall be measured and paid separately.
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge :
Dismantling boarding, any description, fixed in any position with nail / Bidding etc.
M&L for 18/19 mm thick Prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, both/all sides covered with 4 to 5 mm thick teak wood beading, fixed as in cupboard, arrangement to up down on required size complete all as specified & as directed by Engineer-In-Charge.
S&F in repair PVC door seal / snake guard including accessories items nails screw etc. complete all as specified and directed.
Welding in repairs n.exc.6mm thick of metal to be welded n.exc 2.5 cm in length complete all as specified and directed.
Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.
M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. Note- Modular Switch and sockets will be measured and paid seperately.
For one light point/fan point controlled by one SP switch
For one bell point controlled by one No bell push
Complete All as per item No 136 here in before but for one 3 pin socket out let, 6 Amps on same board
Complete All as per item No 136 here in before but for one 3 pin socket out let, 6 Amps on Independent board
Complete All as per item No 136 here in before but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge. ( Only one 15 Amp point will be in one circuit)
Supply and Fix Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and Fix Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and Fix Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.
Supply and Fix Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and Fix Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.
Supply and Fix Bell push Modular flush type 6 Amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, , suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. Note- Switch and sockets will be measured and paid seperately.
For one light point/fan point controlled by one SP switch
For one light point controlled by two 2 - way SP switches
For one bell point controlled by one No bell push
Complete All as per item No 146 here in before but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
Complete All as per item No 146 above in before but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.
Complete All as per item No 146 here in before but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.
M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in existing PVC conduit including mild steel sunken boxes with earth dolly duly powder coated suitable for hylem sheet of required size, suitable for switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. Note- Switch and sockets will be measured and paid seperately.
For one light point/fan point controlled by one SP switch
For one light point controlled by two 2 - way SP switches
For one bell point controlled by one No bell push
Complete All as per item No 150 here in before but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
Complete All as per item No 150 Here in before but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.
Complete All as per item No 150 here in before but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.
S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fix switch piano 5 Amps flush type single pole two way suitable for 240 volt AC
S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fix bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.
Supply and fixing ding dong bell AC 230 volt single pole complete all as specified and directed
Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.
Supply only Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge.
Supply only Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans.
Supply only switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only socket outlet flush type 3 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only switch piano 5 Amps flush type single pole two way suitable for 240 volt AC
Supply only switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply only bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed.
Supply onlying ding dong bell AC 230 volt single pole complete all as specified and directed
Supply only stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.
Supply only stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty complete all as specified and diected.
Supply only Rigid non-metallic PVC conduit of external diameter 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.
Taking down old unsv VTPN DB of any size.
All as per item no 178.00 but TPN 8 way
All as per item no 178.00 but TPN 4 way
Taking down old unsv MCB SPN DB of any size.
Complete All as per item no 182.00 here in before but SPN 8 way
Complete All as per item no 182.00 here in before but SPN 12 way
Supply and fixing in replacement of MCCB 200 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.
Supply and fixing in replacement of MCCB 160 Amps FP 415 volts 3 phase 50 HZ ,Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed.
Supply and fixing in replacement of MCCB 125 Amps FP 415 volts 3 phase 50 HZ, ,Ics=100%Icu,breaking capacity 16 KA complete all as specified and directed.
Supply only MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.
Supply only MCB SP 40 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.
Supply only MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.
Supply only MCB TP 25-63 Amps 10 KA, 415 volt 50 Hz 'C' Series all as specified and directed by engineer-in-charge.
Taking down unserviceable submain wiring of alluminium of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed.
M & L for in submain wiring with two run of 10.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 25 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall and surface conduit on ceiling portion only complete all as specified . (Note:- 3 Runs of 10.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose) .
Complete All as per item no 193 here in before but for 6.0 sqmm wire
Complete All as per item no 193 here in before but for 4.0 sqmm wire ( For geyser and AC points)
Complete All as per item no 193 here in before but for 2.5 sqmm wire
Supply installation commissioning testing of tripod earthing in any kind of soil/strata complete with copper bonded earthing electrode chemical earthing system outer electrode dia 25 mm and 3 mtr long tightly filled with crystalline conductor mixture 250 microns copper coated along with bag of back bill compound 50 kg buried directly in the ground (earth pit not less than 2.25 meter deep below ground level) connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts,nuts,check nuts and washers and connecting earthing test point ,including CI covers ,frame and PCC (1:3:6) type C-2 using 20 mm graded stone aggergate as in earthing pit with CI cover and framing including necessary earth work and incl taking out old u/s earthing material etc complete all as specified . Note- PCC chamber shall be constructed at least one meter away from the building shall be provided in slanting manner. Note- PCC cover pit shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 kg (sqm in liew of CI)
Material and labour in repair for galvanised iron strip 25 X 4 mm with saddles and fixing screws and connected as per site requirement comlete all as specified and as directed by Engineer-in-Charge.
Complete All as per item no 198 here in before but 4mm dia GI wire
Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.
Supply only wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.
Supply only wall mounted LED bulk head fittings, 10 watt, , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge.
Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.
Supply only surface mounted round shape 15 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
Supply only surface mounted round shape warm white 24 watt 220 volts AC, metal housing ,powder coated with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED light including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
Supply only focus light round shape warm white LED 12 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
Supply only focus light round shape warm white LED 6 watt 220 volts AC with high efficiency PMMA diffuser suitable for surface/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.
Supply only ultra modern design architectural design 36 watt 2x2 recess LED, 3000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.
Supply PVC gang box suitable for one switch 5 Amps complete with screw and necessary arrangement complete all as specified and directed by Engineer in Charge.
Complete All as per item no 210 here in before but for one 5 amps switch socket outlet.
Complete All as per item no 210 here in before but for one 15 amps switch socket outlet.
Supply only Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified and directed.
Supply only of exhaust fan heady duty metal body 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells /Crompton Greaves or equivalent to makes mentioned in Approved Make list.
Supply only of exhaust fan heady duty metal body type 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.
Supply only of exhaust fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge.
Supply only of wall mounting fan heady duty 400 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Model No- Swing Penta Wall Fan.
Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.
Supply only ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with remote control complete all as specified and directed by Engineer-in-Charge.
Supply only of fan capacitor with copper wire plastic body 2.5 mfd.
Supply only of fan capacitor with copper wire plastic body 3.15 mfd.
Supply only of fan capacitor with copper wire plastic body 4.0 mfd.
Taking down the old white hylem sheet from the existing flash metal box and replacing new supper quality white hylium sheet of size 8" x 10" complete all as specified and as directed by Engineer-in-Charge.
Complete All as per srl item 223 here in before but of size 5" x 5" complete all as specified and as directed by Engineer-in-Charge.
Complete All as per srl item 223 here in before but of size 8" x 5" complete all as specified and as directed by Engineer-in-Charge.
Complete All as per srl item 223 here in before but of size 9" x 13" complete all as specified and as directed by Engineer-in-Charge.
Supply only Batten Holder PVC white suitable for retrofit type CFL/LED Lamp cxomplete allas specified and as directed.
Supply only White cover plate with frame,1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.
Supply only White cover plate with frame,2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.
Supply only Modular Metal flush box 1 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.
Supply only Modular Metal flush box 2 module suitable as per model available on site Complete all as specified and directed by Engineer-in-Charge.
Supply only Modular MCB SP 25 Amps 10 KA, 240 volt 1 module all as specified and directed by Engineer-in-charge.
Supply only 3 pin plug top 15 Amps all as specified and directed by engineer-in-charge.
Supply only LED flood light fitting 150 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.
Supply only LED flood light fitting 200 watt 230V outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed.
Supply only LED street light fittings 60 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.
Supply only LED street light fittings 70 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.
Supply only LED street light fittings 90 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.
Supply only LED street light fittings 120 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete on existing street light poles.
Supply only of GI pipe light grade 40 mm dia bracket to make L type for bldg light fitting complete all as specified and direted by Engr-in-Charge.
Supply only of MS flat clamp of size 30mmx5mm thick including nuts ,bolts and washer suitable for bldg light fitting complete all as specified and as directed by Engr-in-Charge.
Supply Only Disinfection hypo chlorine based having chlorine percentage 5-6 % in 40 Ltr jar all as specified and directed by engineer in charge.
Net Contract Sum will be after deducting Sch of Credit of Rs 1,92,032.40
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BOQ_842916.xls
BOQ • 0.88 MB
TDFT73.pdf
Tender Documents • 1.51 MB
Download all tender documents and submit your bid