REPAIR TO INTERNAL WATER SUPPLY SANITARY FITTINGS RAIN WATER PIPES ETC INSIDE HOSPITAL AT INHS ASVINI UNDER AGE I ASVINI COLABA MUMBAI

Amount

Taking up or down steel tubing including dismantling tiles/plaster pcc with or without concealed lines with fittings connections of following bore including cleaning for refixing or removal including disposal of debris outside MD land complete all as specified and as directed Engr-in-Charge.

15mm bore

20mm bore

25 mm bore

32mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

Supply and fixing/laying of CPVC Pipes SDR 11 and plain CPVC SDR 11 fittings of following sizes including clamps and hooks on wall / ceiling /or laying in floor, complete all as specified and as directed Engr-in-Charge.

15mm bore

20mm bore

25 mm bore

32mm bore

40 mm bore

50 mm bore

Supply & fixing GI tube,of following bore, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed Engr-in-Charge.

32mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

All as per item No 3 but Refixing old GI tube,of following bore, 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed Engr-in-Charge.

15mm bore

20mm bore

25 mm bore

32mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

Supply & fixing in repairs gun metal globe or gate valve with iron wheel, head, screwed both ends for GI pipe of following sizes,

15mm bore

20mm dia bore

25mm dia bore

32mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars, shaft walls, crumple edges and supports for water pipeline carefully including copings etc.and removing debris outside MD land complete all as specified and as directed Engr-in-Charge. Note: the work to be carried out in roof of G+6 storey bldg

Material & labour for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed Engr-in-Charge.

Material & labour brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including duly reinforced with 10 mm dia MS round bars 2 nos horizontally after each 4 layer of bricks complete all as specified and as directed Engr-in-Charge.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and rubbish off the premises. Note: The place of disposal shall be find out by the contractor.

Chipping ,removing carefully concrete with plaster work by low impact hammer ,breaker without damaging the structure in parapet walls and other concrete surfaces & cleaning and disposal of debris out side the MD land etc complete all as specified and as directed Engr-in-Charge. Hard concrete shopuld not be removed by force and rubbish off the premises. Note: The place of disposal shall be find out by the contractor..

Material & labour for applying the rust remover alkaline in natrue having specific gravity of 1.1 kg/ltr to the existing/additional rebars including wire brushing manually or by mechanical tools, after cleaning the disturbed surface etc. complete by draining water. Rust remover shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) Note :- Measurement on the basis of area of concrete exposed.

Material & labour for applying two coats of anti-rust protective coating in the form of Acrylic Polymer with a minimum solid content to 40% solids mixed with cement in 1:1.5 proportion (1 part polymer and 1.5 parts cement) on rebars after cleaning of rust scales as per manufacturer's instruction. Anti-rust protective shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) Note :- Measurement on the basis of area of concrete exposed.

M/L for TMT bars 10mm dia. and over, Cut to length, bent to shape required including cranking, spirally and binding with MS wire (annealed) not less than 0.9mm dia.by placing in position new reinforcement bars including tack welding to existing reinforcement bars complete all as specified and as directed Engr-in-Charge

Providing bonding coat of SBR polymer over the exposed steel/welded mesh/concrete in ratio 1:1 to 1:1.5 of polymer and cement complete as directed by the consultant. SBR polymer to be procured from one of the manufacturer's given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) .

Material & labour for repairing the damaged concrete portion by SBR Polymer with a minimum solid content to 40% cement mortar in proportion 1:5:15 i.e. (1 part SBR polymer : 5 parts OPC cement and and 15 parts of graded quartz aggregate (sand) upto 25mm thickness as directed by the manufacturer's instruction including necessary curing etc complete all as specified and as directed Engr-in-Charge SBR polymer shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite).

Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces of any description in CM (1:4)with Ready mix plaster of Ultratech or eqvt mixed with integral water proofing compound and finished even & smooth without using extra cement complete all as specified and as directed Engr-in-Charge (Note : WPC will be measured and paid separately)

Supply only integral water proofing compound of approved ISI make.

Material & labour for rendering 15mm thick in CM 1:6 on other than fair faces of bricks work or concrete finished even and smooth without using extra cement.

Material & labour preparing newly plastered surfaces of walls and applying two coats of Acrylic based exterior paint exterior grade (100% Acrylic) over a coat of primer & bio wash on wall.

Material and labour for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of acrylic (100 % antifungal interior grade) paint over a coat of primer etc complete all as specified and as directed Engr-in-Charge

Material & labour for smart care PU injection grout with nozzle PU injection (iK)is a hydrophobic grout based on polyurethane up on contact with water it reacts to form a closed cell rubber like foam while expanding its volume up to 27 times.the cured material is of a constant volume. since water is not a component of the foam structure the cured material is essentially not affected by water or dryness. the reacted material does not shrink or swell. Depending up on the pressure of injection it reacts to form a very dense material or foam Make

Material & labour for water proofing treatment of external walls by applying two coats of elastomeric external acrylic water proofing coating material (STP Shalicryl 215)after cleaning the surface thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturer’s specifications and directions of Consultant/Architect. Make : Build core STP chemicals or equivalent complete all as specified and as directed Engr-in-Charge (Note :- work will be carred out with scafolding all over bldg upto G+6 th floor of wall. Rate of scaffolding & acrylic based exterion paint is included in this item).

Material & labour for taking out/removing vegitation growth or shrubs and injecting chemical GLYPHOSPHATE 41% SL 20 ML or till refusal by making cut/injection in the stem of plants 30 mm c/c and spraying with solution (25 ml GLYPHOSPHATE 41% diluted with one lit of water) and removing the plants/vegitation growth completely dead, including necessary scaffolding, julas etc complete as per manufacturer of chemical Biostadtlndia Ltd or equivelent approved by GE.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Material & labour for rolled MS section for roof trusses, stairs,trussed, purlins, rails, fastenings including distance piece, cleats etc

Material & labour preparation of new steel surfaces of any description and applying two coat of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth complete all as specified and as directed Engr-in-Charge.

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and as directed Engr-in-Charge.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and as directed Engr-in-Charge

Supply & fixing 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

Supply & fixing CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to wallsor laying in trenches complete all as specified and as directed Engr-in-Charge.

Supply & fixing CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified and as directed Engr-in-Charge.

Material & labour cutting holes using core cutter into or through cement concrete slab, chajja, parappet etc reinforced cut through of superficial area of appropriate bore including making good after inserting and setting pipe and sealing with epoxy grouting

Supply & fixing bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required and similar small articles conforming to Fe 290 Gde E165 for new or old pipes in shaft up to a height of 35 RM including scaffolding complete all as specified and as directed Engr-in-Charge

Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and as directed Engr-in-Charge

Material & labour for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed Engr-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.and removing debris out side MD land complete all as specified and as directed Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.

Demolition floor, hearth or wall tiling including cement mortar bedding and backing coat of any thickness and rubbish off the premises. Note: The place of disposal shall be find out by the contractor.

Material & labour granite (of any type) slab 18-20 mm thick machine cut in floors, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer In Charge.

Material & labour granite (of any type) tiles 12 mm thick machine cut, in skirting/ dado etc. vertical surfaces laid over cement screed, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed by Engineer In Charge.

Material & labour for glass mosaic tiles 20 to 25 x 20 to 25 mm of thickness 3.8 to 4.3 mm of joint 1.6 mm assembled in panels of 300 x 300 mm to rendered surfaces adhesive. The backing paper shall be removed after the tiles have set by washing and cleaning the tiles (make: mridul/equivalent)

Material and labour for vitrified ceramic tiles 600 x 600 x 8 to 10 mm of light colour (matt finish/nano finish, double charged), polished/glazed area of each tile in floors set jointed and pointed in epoxy grout to match flooring with and including 20mm cement sand screed in cement mortar 1:6 complete. The joints shall be 2 mm thick and 2 mm thick spacer at every corner shall be used complete all as specified and as directed Engr-in-Charge Make:- Orient bell, Jonson & Kajaria and Epoxy grout : Somany ezy grout, Dr fixit fevimate TG or equivalent make as specified in Appx 'B' of PS hereinafter.

Material and labour for glazed/ polished ceramic tiles in vertical surfaces 600 x 300 x 8 to 10 mm thick (glossy/nano finish, double charged), set and jointed using tile adhesive (3-6 mm thick) and pointed in epoxy grout to match shade of tile including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. Note: both the substrates should be cleaned, spread the adhesive on plastered surface and comb with a notched trowel and place the tile. Makes: (i) Tile adhesive : Dr fixit fevimate WMA or Roff new construction tile adhesive or equivalent make as specified in Appx 'B' of PS hereinafter. (ii) Epoxy grout: Somany ezy grout or Dr fixit fevimate TG or equivalent make as specified in Appx 'B' of PS hereinafter

Supply & fixing 400MMX400MMX 6 to 8mm thick non skid ceramic tile any colour tile set jointed and pointed in coloured cement slurry in flooring with and including 20mm cement sand screed in cement mortar 1:6 complete all as specified and as directed Engr-in-Charge.

Supply & fixing glazed ceramic coloured tiles of size 300x450x 7mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed by Engineer In Charge

Material & labour for mirror polishing to the existing stone flooring of any type to give high gloss finish with machine evenly with fine granding ( Fine Grade No. 120) and finally oxalic acid shall be dusted over the surface at the rate of thirty three (33) gms. per square metre sprinkled with water and rubbed hard with pad of wooden rags and floor shall be wiped with a moist rag and dried with a soft cloth and finished clean including pointing of joints with cement slurry mixed with pigment to match the colour of slab complete all as specified and as directed Engr-in-Charge.

Material and labour for granite slabs, 18 to 20mm thick, table rubbed and polished fixed independently to walls duly supported with partition walls,complete all as specified and as directed Engr-in-Charge at site.

Supply & fixing in repair 9mm thick 600x600mm size gypsum prelaminated tiles false ceiling on aluminium anodized snap grid of size 605 mm x 605 mm with aluminium anodized angle 20 mm x 20 mm x 1.2 mm fixed to wall along the perimeter of ceiling with the help of nylon sleeves & screws, at 610mm centres and main and cross tees of size 31.75 mm x 31.75 mm x 1.6mm & 25.4 mm x 25.4 mm x 1.22 mm respectively with ceiling cleats / angle brackets of size 15 mm x 15 mm x 1.5 mmincluding 6 mm dia.G.I.wire suspended from the soffit at 1220 mm centres (upto 1200 mm length maximum) fixed to roof slabs by means of steel expansion fasteners10mm dia complete all as specified and as directed Engr-in-Charge. Make: Armstrong / Everest /Ramco / equivalent make

Supply and fix plain ceiling system consisting of 600 mm x 600mm tiles (As per IS: 2095-1996: Part I) of pre coated galvanised aluminium in 0.7 mm thickness in required colour to be laid “on Armstrong/Hunter Duoglas grid systems/equivalent make as specified in Appx 'B' of PS hereinafter with 15 mm wide T - section flanges in required colour having rotary stitching on the 1200 mm & 600 mm cross tees. The grid should be GI of make “Armstrong/Gyproc /equivalent make ”with 15mm wide T - section flanges in required colour shade having rotary stitching on all T sections i.e. the main runner, 1200 mm & 600 mm. Tees with a web height of 32 mm. Perimeter trim to be Armstrong/Gyproc /equivalent make as specified in Appx 'B' of PS hereinafter, wall angles of size 19x19mm, secured to walls at 450 mm maximum centres including necessary fitting and 6 mm butter fly hook GI suspenders fixed to slab using steel fastener in ceiling complete all as specified and as directed Engr-in-Charge Make: Armstrong/Hunter Duoglas / Everest/Gyproc

Taking down old aluminium framed windows/door/partion including glass/ply/particle board at any description and in any position complete all as specified and as directed Engr-in-Charge

Supply and fix powder coated aluminium sections of various sizes required for frame and shutters of doors, windows, ventilators and partition with one or more rebates etc.including necessary joining cleats, glazing clips, beading, rubber packing, screws and all other fittings like locking arrangement for shutters etc complete all as specified and as directed Engr-in-Charge. Notes:- (i) Glazing/wire mesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading, glazing pins, screws, handle,hinges,locking arrangement ,towerbolts etc which shall not be measured for arriving the weight

Supply & fixing in repairs 18/ 19mm thick plywood grade BWR fixed with screws including fixing and polishing teakwood beading 4mm thick to exposed sides, as in cupboards, shutters etc including necessary fixing arrangements complete all as specified and as directed Engr-in-Charge

Material & labour 0.9 mm decorative laminate type 1 of surface finish , colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction

Supply & fixing 10 mm thick toughened glass as in partition, doors and similar works including cutting to shape drilling holes required complete all as specified and directed by Engr-in-charge

Material and labour for preparation of old plastered surfaces of wall by washing and rubbing down and stopping old distempered surfaces/painted surfaces and complete removal of existing treatment and applying two coats of acrylic (antifungal) paint over a coat of primer etc complete all as specified and as directed Engr-in-Charge.

Material and labour for preparation of old plastered surfaces of ceiling by washing and rubbing down and stopping old distempered surfaces/painted surfaces and complete removal of existing treatment and applying two coats of acrylic (antifungal) paint over a coat of primer etc complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair 110mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete, type B1(1:2:4) complete all as specified and as directed Engr-in-Charge.

Supply & fixing SS sink of overall size 680 mm x 530mm x 215 mm single bowl without drainage board made out of 1.00 mm thick 304 grade stainless steel sheet with plug, waste coupling ,washers, waste pipe, CI Cantilever brackets, connecting union to pipe complete all as specified and as directed Engr-in-Charge.

Material & labour cutting holes in brickwork/ PCC/ RCC using core cutter and providing 40 mm dia PVC pipe as spout of required length and making good with water proofing treatment complete all as specified and as directed Engr-in-Charge

Supply and fix in repair 15 mm bore bib cock with wall flange complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No CQT 23047 or equivqlent in Crab Tree/Kohler or equivalent make

Supply & fixing in repair PVC pipe 40mm dia in any position at any level all as directed duly concealed joined up to drain pipe including connecting to existing PVS waste pipe with elbow and Tee including cutting and jointing existing drain line

Supply and fix concealed stop cock 15 mm dia with adjustable wall flange complete all as specified and as directed Engr-in-Charge Make: Jaquar Model No CQT 23083 or equivalent make mentioned in Appx 'B'

Supply & fixing in repair wash hand basin vitreous china, white, flat black type of size 630 mm x 450 mm including CI brackets and 32 mm dia CP waste coupling including cutting for and pining in ends of bracket and connecting up supply pipes, waste or taps complete all as specified and as directed Engr-in-Charge.

Supply & fixing I PVC connector 15mm dia any length with CP brass nuts complete all as specified and as directed Engr-in-Charge and connected to waste water line

Supply & fixing in repair 15mm dia pillar tap CP brasspressmatic/ selfclosing type complete all as specified and as directed Engr-in-Charge. Make- Jaquar cat No PRS-031 or equivalent make mentioned in Appx 'B'

Material & labour in repairs cast iron floor trap 100mm Dia, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Supply & fixing in repairs anodized aluminium framework for doors, windows, ventilators with one or more rebates including jointing cleat for fixing and all fittings, etc complete all as specified and as directed Engr-in-Charge.

Supply & fixing in repairs plain Aluminium sheeting 0.71mm thick Alloy 31000 H4 in shutters incl. fixing to aluminium framework with rivetting and all fittings complete all as specified and as directed Engr-in-Charge.

Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) Material & labour for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. (ii) Rendering of uneven surfaces with 15mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)

Material & labour for applying two coats of polymer modified cementious water proofing coating as per manufactures instruction to bottom and vertical sides upto finished floor level plus 100mm height. The thickness of two layer shall be 1 mm. when the second layer is still sticky, coarse sand spray shall be carrie d for vertical and bottom surfaces of sunken portion all as specified and directed

Material & labour for rendering the bottom and sides upto bottom of skirting with minimum 20mm thick in CM 1:4 mixed with integral water proofing compound including rounding of corners and junctions sloping towards spout finished fair and even with using extra cement to sunken floor with WPC complete all as specified and as directed Engr-in-Charge. Note: Test the water proofed area by filling with water for atleast 72 hours and tested for leakage, seepage and to the entire satisfaction of AGE(I)

Material and labour for filling cement concrete 1:5:10 complete all as specified and as directed Engr-in-Charge

Material & labour CPVC pipe 40 mm dia medium grade laid on sunken floors including core cutting and well packed pipe with waterproofing grouting complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair 15 mm bore cast copper alloy chromium plated bib cock auto closing system with buit in control cock complete all as specified and as directed Engr-in-Charge. Make: Jaquar, Cat No - 043 or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix in repair angular stop cock 15mm bore with wall flange complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No CQT 23059 or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix in repair 15mm bore cast copper alloy chromium plated urinal vavle auto closing system with buit in control cock complete all as specified and as directed Engr-in-Charge. Make: Jaquar, Cat No - 077 or or equivalent make mentioned in Appx 'B'

Supply and fix in repair over head shower rose 100mm size round shape single flow (ABS body) complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No OHS-CHR-1989 or equivalent make mentioned in Appx 'B'

Supply and fix in repairs chrome finish soap dish fixed with and including CP brass screws complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No ACN-1131N or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix in repairs brass chromium plated tubular towel rail, 20 mm dia `D' type, 60 cm long between flanges including CP brass screws and wooden/plastic cleats as required complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No ACN 1111NM or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix valve mixer with provn for head shower complete with 115mm long bend pipe on upper side, connecting legs and flange complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No CQT-23273 UPR or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix health faucet with flexible pipe(ABS Body) with 01 meter long PVC tube and wall hook complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No ALD CHR-583 or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix two way bib tap 15mm dia complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No CQT 23041 or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix in repairs central hole basin mixer without popup waste system with 450mm long braided holes complete all as specified and as directed Engr-in-Charge. Make: Jaquar Model No CQT-23167B or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix in repairs table top ceramic wash hand basin coloured vitreous china oval shape and of size 610x460x150mm.Make CERA or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix wall mountained U shaped powdercoated stainless steel hand rail of size 600 x 100 mm with hinge including all necessary fittings complete all as specified and as directed Engr-in-Charge. Make: Cera special needs range Model No 2506 or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix powdercoated stainless steel shower chair (foldable) with back rest of size 465 x 315 mm including all necessary fittings complete all as specified and as directed Engr-in-Charge. Make: Cera special needs range Model No 2507 or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix powdercoated stainless steel wall mounted grab bar 350 mm long including all necessary fittings complete all as specified and as directed Engr-in-Charge. Make: Cera special needs range Model No 2505 or equivalent make as specified in Appx 'B' of PS hereinafter.

Suppy & fixed in repairs PVC connections 450 mm long braided hose with M10X1 nipple,15 mm nut, O ring and rubber washer complete all as specified and as directed Engr-in-Charge.

Suppy & fixed in repairs PVC connections 600 mm long braided hose with M10X1 nipple,15 mm nut, O ring and rubber washer complete all as specified and as directed Engr-in-Charge.

Supply and fix PVC valveless, syphonic action type, dual flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair white vitreous china wash down water closet pedestal pattern size 580 mm( EPWC) including seat cover and CI 'P' or 'S' trap complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair vitreous china squatting pan orissa pattern size 580 x 440mm white with integral foot rest complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair white vitreous china urinal (full stall type) flat back, (same as existing) with cast iron hangers, 15 mm dia CP spreader, 32 mm dia CP brass domical white for connector to 32mm dia cast bottle trap including cutting and making good the wall and floors whereever required complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair PVC waste pipe 32mm bore, 90cm long fixed with waste coupling complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair urinal partition of vitreous China white 310x700cm size tapering at bottom, 50mm thick to match existing pattern complete all as specified and as directed Engr-in-Charge.

Supply and fix flat back urinal of size 360 x 330 x740 mm with integrated electronic flushing cistern with fixing accessories complete all as specified and as directed Engr-in-Charge. Make: Cera Model No 5005A or equivalent of Jaquar or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix surface mount corner guard of wing size 76 mm with 1.78 mmcontinuous aluminium retainer, 2 mm vinyl cover, and with top/bottom caps of colour as specified and of required height fixed to walls with self tapping screws of height as per site requirement and making good complete all as specified and as directed Engr-in-Charge. Make: Fastrack-Inpro ( 1.2 m height) or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply and fix hanger-5 point system with 4" track- trolley & fixed to ceiling including fixing accessories complete all as specified and as directed Engr-in-Charge. Make: Fastrack 210 IV or equivalent make as specified in Appx 'B' of PS hereinafter.

Supply & fix in repair3-layer PP-R (polypropylene random copolymer) pipes SDR 7.4 (PN 16) UV stabilised and anti-microbial fusion welded having thermal stability for hot & cold water supply and all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, or in floors etc. of size 25 mm outer dia complete all as specified and as directed Engr-in-Charge.

Supply & fix in repair 3-layer PP-R (polypropylene random copolymer) pipes SDR 7.4 (PN 16) UV stabilised and anti-microbial fusion welded having thermal stability for hot & cold water supply and all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, or in floors etc. of size 20 mm outer dia complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair PP-R gate valves (brass insert) with iron wheel head, ( ISI marked) screwed both ends for PP-R pipes of size 25 mm outer dia complete all as specified and as directed Engr-in-Charge.

Supply and fix in repair PP-R gate valves (brass insert) with iron wheel head, ( ISI marked) screwed both ends for PP-R pipes of size 20 mm outer dia complete all as specified and as directed Engr-in-Charge.

Supply & fixing in repairs 15 mm bore Florentine Pillar Cock with Extended Lever Handle cast copper alloy chromium plated complete all as specified and as directed Engr-in-Charge. Make- Jaquar cat No FLR-5031 equivalent make as specified in Appx 'B' of PS hereinafter.

Supply & fixing in repairs 15 mm bore Florentine Bib Cock with Extended Lever Handle and Wall Flange cast copper alloy chromium plated complete all as specified and as directed Engr-in-Charge. Make- Jaquar cat No FLR-5043 equivalent make as specified in Appx 'B' of PS hereinafter..

Supply & fixing in repairs stainless steel sink without draining board made out of 1.00 mm thick 304 grade stainless steel sheet with plug, washers,waste coupling, waste pipe, fixing arrangement as required at site, connecting union to pipe, overall size 610 mm x 460 mm and bowl size 560 mm x 410 mm x 215 mm complete all as specified and as directed Engr-in-Charge.

Supply & fixing in repairs stainless steel sink waste coupling made of steel and plastic of make Nirali/Diamond

Supply & fixing in repairs 1 mm thick stainless steel grating 5 inch dia glossy finishcomplete all as specified and as directed Engr-in-Charge

Supply & fixing in repairs 32 mm dia brass CP waste coupling for WHB full/ half thread

Supply & fixing in repairs 40 mm dia brass CP waste coupling for WHB full/ half thread

Demolition of cement concrete (unreinforced)of any description and in any position not otherwise specifically provided and pinted in any mortar

Supply & fixing in repair PVC cabinet mirror of size not less than 350 X 450 mm (Prayag/Parryware)

Supply & fixing in repairs urinal spreader of CP finish any color for fixing with 15mm dia pipe (min. weight 60gms)

Supply & fixing in repairs automatic urinal sensors without damaging the urinal complete all as specified and as directed Engr-in-Charge.

Supply & fixing in repairs toilet paper holder complete all as specified and as directed Engr-in-Charge. Make- Jaquar cat No AKP-35751Pequivalent make as specified in Appx 'B' of PS hereinafter.

Unitech Enterprises

satguruenterprises

B P ENTERPRISES

SHREE JAGDISH FURNITURE CO.