Construction Of Ganig Samajada Samudaya Bhavan At Indi In Indi Taluk, Vijayapur District Continued work

CAzÁdÄ ¥ÀwæPÉUÀ¼À DqÀ½vÁvÀäPÀ / vÁAwæPÀ ªÀÄAdÆgÁwAiÀÄ gÀ¸ÉÛ PÁªÀÄUÁjAiÀÄ ¥Àj²Ã®£Á ZÉPï °¸ïÖ

1 PÁªÀÄUÁjAiÀÄ ºÉ¸ÀgÀÄ aPÉÆÌÃr vÁ®ÆQ£À aPÉÆÌÃr ¥ÀlÖtzÀ°è C¥ÀgÀ f¯Áè DgÉÆÃUÀå ªÀÄvÀÄÛ PÀÄlÄA§ PÀ¯Áåt C¢üPÁjUÀ¼À PÀZÉÃj PÀlÖqÀ ¤«Äð¸ÀĪÀÅzÀÄ.

3 C£ÀĪÉÆâvÀ QæAiÀiÁ AiÉÆÃd£ÉAiÀÄ ¥ÀvÀæ ¸ÀA & ¢£ÁAPÀ ¥ÀÄl.¸ÀA & PÀæªÀÄ ¸ÀA ¸ÀgÀPÁgÀzÀ ¥ÀvÀæ ¸ÀASÉå: ¯ÉÆÃE: : LJ¥sïJ: 2016 ¢£ÁAPÀ

4 CAzÁdÄ ªÉÆvÀÛ (®PÀë) 245.00

5 ¥Àæ¸ÀPÀÛ ¸Á°£À C£ÀÄzÁ£À 245.00

6 ¸ÀܼÀzÀ ®¨sÀåvÉ §UÉÎ ¯ÉÆÃPÉÆ¥ÀAiÉÆV E¯ÁSÉAiÀÄ ¸ÀܼÁªÀPÁ±À«gÀÄvÀÛzÉ

7 mÁæAiÀÄ¯ï ¦mï «ªÀgÀ 1.50«Äà x 1.50«Äà x 1.50 «ÄÃ

8 «£Áå¸ÀzÀ ¥ÀæPÁgÀ «£Áå¸À ®UÀwÛ¸À¯ÁVzÉ

9 ªÀÄÄRå ªÁ¸ÀÄÛ ²°à EªÀjAzÀ C£ÀĪÉÆâvÀ PÀlÖqÀzÀ £ÀPÉë -

10 ªÀÄÄRå ªÁ¸ÀÄÛ ²°à EªÀjAzÀ C£ÀĪÉÆâvÀ ¯ÉÃ-Omï £ÀPÉë -

11 vÀ¼À¥ÁAiÀÄzÀ J¸ï.©.¹. 25.00 l£ï / ZÀ.«ÄÃ

12 vÀ¼À¥ÁAiÀÄzÀ PÁæ¸ï ¸ÉPÀë£ï £ÀPÉ ®UÀwÛ¹zÉ

13 UÉÆÃqÉ PÁæ¸ï ¸ÉPÀë£ï £ÀPÉ ®UÀwÛ¹zÉ

14 Dgï.¹.¹. «ªÀgÀ ºÁUÀÆ UÉæÃqï ®UÀwÛ¹zÉ

CAzÁdÄ ¥ÀwæPÉAiÀÄ°è ¥ÀjUÀt¹zÀ CA±ÀUÀ¼ÀÄ : ¸ÀzÀj CAzÁdÄ ¥ÀwæPÉAiÀÄ£ÀÄß £É®ªÀĺÀrUÉ F PɼÀPÀAqÀ CA±ÀUÀ¼À£ÀÄß ¥ÀjUÀt¸À¯ÁVzÉ.

15 Earthwork lowering & levelling for building

Providing PCC to the Bed

Providing T.M.T Steel reinforcement for R.C.C work and laying in position reinforced cement concrete of design mix M20 for Columns, Linte& Beams & Slab.

Providing and removing centering, shuttering, strutting propping etc.,

Providing and constructing burnt brick masonry for superstructure.

Providing and constructing granite/ trap/ basalt size stone masonry in superstructure for corners.

Providing 12mm thick Internal cement plaster in single coat with cement motrar 1:4 to brick masonry.

Providing applaying two coats of wall putty to inside plastered walls and ceiling using white cement putty.

Providing 18mm thick External cement to inside in single coat with cement mortar 1:4 to brick masonry.

For roof Slab & Trraaces Providing & applaying water proofing

Providing white Sal wood frames of doors, windows.

Providing and fixing in position fully panelled Honne wood shutters for doors.

Providing and fixing in position fully glazed for Honne wood shutters with Honne wood.

Providing and fixing M.S grill work for windows and ventitalors.

Providing and fixing Vitrifed glazed tiles of approved make, quality & colour of size 600x600x10mm thick fixed on bed of 12mm thick cement mortar for judges Chambers.

Providing and laying flooring using prepolished, water cut/gang saw 19mm thick granite laid with a bed of 20mm thick 1:4 cm for rest of floor.

Applaying priming coat & painting two coats over new wood surface.

Providing and finishing extrenal walls in two coats over one coat primer with antifungal paint.

Providing and applaying painting in two coats with plastic emulsion paint of approved brand on wall surface.

Providing and fixing on wall surface 2.5kg/ sq.cm H.D.P.E rain down water pipes 110mm outer dia.

Providing and fixing M.S Hand railing for Balcony/Staircase etc.,

Providing and fixing MS oxidised Hinges, Hold fasts, M S Handles, Door Locks, tower boits to Door & windows.

Providing Ceramic tiles of approved make, shade and size for flooring white vitreous china clay, water closet European type, white vitreous cina clay, flat back, lipped front urinal basin, wash basin size & mirror with plastic moulded frame.

Providing and fixing C.P brass towel rail, brass bib cook and placing on trrace polyethylene water storage tanks with manhole lid.

Providing anf fixing in position upvc windows and ventilators as per approved drawings with sliding stutters using three track window frame.

21 EvÀgÉ CA±ÀUÀ¼ÀÄ

Section Officer Assistant Executive Engineer PW D Sub Division Chikodi

E S T I M A T E FOR SINKING OF BORE WELL -1

Sl. No. Item of work. Qty Unit Rate. Amount. Rate.

#REF! 6.10 Mtrs #REF! #REF! 1933.00

#REF! 1.00 Nos #REF! #REF! 164.00

Total :: #REF! Total ::

Assistant Executive Engineer PWD Sub-Division, Chikkodi Executive Engineer PWD Division, Chikkodi

SUB- ESTIMATE OF PUMPING MACHINERY

Sl. No. Item of work. Qty Unit Rate. Amount. Rate.

1 SUBMERSIBLE PUMPSET :

#REF! 1 Set #REF! #REF! 34780.00

#REF! 1 Each #REF! #REF!

3 SUBMERSIBLE CABLE :

CABLE 146 Mtrs #REF! #REF! 165.00

4 PRESSURE GAUGE :

GAUGE 1 Each #REF! #REF! 450.00

#REF! 1 Each #REF! #REF! 1250.00

6 NON RETURN VALVE

#REF! 1 Each #REF! #REF! 1275.00

7 POWER CAPACITOR:

#REF! 2 KVAR #REF! #REF!

#REF! 1 Each #REF! #REF!

#REF! 1 Job #REF! #REF!

#REF! 1 Job #REF! #REF! 1250

#REF! 20 Mtr #REF! #REF! 195.00

a IN NEW TRENCH :

#REF! 15 Mtr #REF! #REF! 135.00

#REF! 10 Mtr #REF! #REF! 80.00

#REF! 1 Each #REF! #REF! 650.00

#REF! 1 job #REF! #REF! 3750.00

Total Rs : #REF! Total Rs :

Assistant Executive Engineer PWD Sub-Division, Chikkodi Executive Engineer PWD Division, Chikkodi

GOVERNMENT OF KARNATAKA

KARNATAKA PUBLIC WORKS DEPARTMENT

DETAIL PROJECT REPORT

#REF! NAME OF WORK: CONSTRUCTION OF ADHO BUILDING IN CHIKKODI, BELAGAVI

BANASHRI CONSULTANCY SERVICES Shop No 1, Sharadha Layout, Shettar Colony, Dharwad-580004 Website: banashricon.com Email: [email protected] Tel.: +91 74113 9654

It.No. Description of items. Unit Volume Page No Item No Basic Rate S.R 2021-22 Total - 1 Add Lift charges Total - 1 Add for Formwork Area Specific Loading 3 % Rate For FF,HRF

FIRST FLOOR FF (1%) FF

1 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 61.82 6243.82 187.31 6431.13

3 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 61.82 6243.82 187.31 6431.13

5 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 61.82 6243.82 187.31 6431.13

7 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 61.82 6243.82 187.31 6431.13

9 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 61.82 6243.82 187.31 6431.13

11 11.32 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complet kg 2 84 11.32 83.00 83.00 0.83 83.83 2.51 86.34

12 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed m3 1 15 2.1.4 5728.00 5728.00 57.28 5785.28 173.56 5958.84

13 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, la m3 2 13 6.8 6690.00 6690.00 66.90 6756.90 202.71 6959.61

14 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, s m2 2 14 6.15 866.00 866.00 8.66 874.66 26.24 900.90

15 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 2 85 11.34A 131.00 131.00 1.31 132.31 3.97 136.28

16 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour hav m2 2 112 12.90 7240.00 7240.00 72.40 7312.40 219.37 7531.77

17 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to bric m2 2 42 8.8 307.00 307.00 3.07 310.07 9.30 319.37

18 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curin m2 2 41 8.1.1 213.00 213.00 2.13 215.13 6.45 221.58

19 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specificati m2 2 50 8.51 83.00 83.00 0.83 83.83 2.51 86.34

20 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid m2 2 62 9.21.2 1148.00 1148.00 11.48 1159.48 34.78 1194.26

21 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, l m2 2 64 9.30 2395.00 2395.00 23.95 2418.95 72.57 2491.52

22 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on m2 2 60 9.11 762.00 762.00 7.62 769.62 23.09 792.71

23 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost m2 2 65 9.38 974.00 974.00 9.74 983.74 29.51 1013.25

24 8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. m2 2 51 8.63 62.00 62.00 0.62 62.62 1.88 64.50

25 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to r m2 2 45 8.29 208.00 208.00 2.08 210.08 6.30 216.38

26 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparin m2 2 48 8.40 90.00 90.00 0.90 90.90 2.73 93.63

27 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of m3 2 100 12.12 75344.00 75344.00 753.44 76097.44 2282.92 78380.36

28 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of m m2 2 100 12.15 5074.00 5074.00 50.74 5124.74 153.74 5278.48

29 12.83.2 Providing and fixing factory made uPVC door frame made of uPVCextruded sections having an overall dimension as below (tolerance±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanize m 2 110 12.83.2 229.00 229.00 2.29 231.29 6.94 238.23

30 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50m m2 2 105 12.53 287.00 2847.00 28.47 2875.47 86.26 2961.73

31 8.45.2 Varnishing with varnish of approved brand and manufacture :Two coats glue sizing with spar varnish or an under coat of flatting varnish to give an even shade and produce a smooth dry and mat surface including preparing the surface after thorougly c m2 2 49 8.45.2 132.00 132.00 1.32 133.32 4.00 137.32

32 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides Nos 2 105 12.51 1481.00 1481.00 14.81 1495.81 44.87 1540.68

33 8.83 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, provi m2 2 1st Addedendum 8.83 1175.00 1175.00 11.75 1186.75 35.60 1222.35

34 11.28 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and kg 2 83 11.28 500.00 500.00 5.00 505.00 15.15 520.15

35 12.69.20 Providing and fixing ISI marked oxidised M.S. single acting spring hingeswith necessary screws etc.125mm Nos 2 108 12.69.20 189.00 189.00 1.89 190.89 5.73 196.62

36 Providing and fixing Hold fasts M.S. for doors etc complete ( Material Components P.No -A21 I.No 285 ) each 2 A-21 285 32.00 32.00 0.00 32.00 0.00 32.00

37 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming toIS:4992 with necessary screws etc. complete :125mm each 2 108 12.73.1 30.00 30.00 0.30 30.30 0.91 31.21

38 12.60 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 2 107 12.60 832.00 832.00 8.32 840.32 25.21 865.53

39 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 2 107 12.63 111.00 111.00 1.11 112.11 3.36 115.47

40 Providing and fixing Screws approved make SS Screws of sizes for structural glazing /ACP Cladding ( Material Components P.No - A28 I.No 548 ) Nos 2 A-28 548 6.00 6.00 0.00 6.00 0.00 6.00

41 Providing and supplying Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with opti m2 2 32 7.51 4333.00 4333.00 43.33 4376.33 131.29 4507.62

42 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 20mm with Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ;,85%, Thermal Conductivity k = 0. m2 2 32 7.52 1583.00 1583.00 15.83 1598.83 47.96 1646.79

SECOND FLOOR (HEAD ROOM & PARAPET WALL) HRF (2%) HRF

1 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 123.64 6305.64 189.17 6494.81

3 11.32 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complet kg 2 84 11.32 83.00 83.00 1.66 84.66 2.54 87.20

4 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed m3 1 15 2.1.4 5728.00 5728.00 114.56 5842.56 175.28 6017.84

5 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, la m3 2 13 6.8 6690.00 6690.00 133.80 6823.80 204.71 7028.51

6 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to bric m2 2 42 8.8 307.00 307.00 6.14 313.14 9.39 322.53

7 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curin m2 2 41 8.1.1 213.00 213.00 4.26 217.26 6.52 223.78

8 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, l m2 2 64 9.30 2395.00 2395.00 47.90 2442.90 73.29 2516.19

9 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to r m2 2 45 8.29 208.00 208.00 4.16 212.16 6.36 218.52

10 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly el m2 2 133 15.1 745.00 745.00 14.90 759.90 22.80 782.70

11 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed grad m3 1 17 2.5.1 6182.00 6182.00 123.64 6305.64 189.17 6494.81

WATER SUPPLY AND SANITORY

3 13.34 Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications L 2 1st Addedendum 13.34 8.00 8.00 0.24 8.24

4 13.6.4.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore-HORIZONTAL Nos 2 116 13.6.4.1 1086.00 1086.00 32.58 1118.58

5 13.3.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Nos 2 115 13.3.1 326.00 326.00 9.78 335.78

6 13.6.2.2Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Nos 2 116 13.6.2.2 735.00 735.00 22.05 757.05

7 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m m3 1 1st Addedendum 1.6.1 371.00 371.00 11.13 382.13

8 1161 5899 Poly Propylene Random Co-ploymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m Mtr 5 34 1161 381.00 381.00 11.43 392.43

9 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Nos 2 123 14.3.1 5005.00 5005.00 150.15 5155.15

10 14.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Nos 2 125 14.7.3 2529.00 2529.00 75.87 2604.87

11 14.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 2 128 14.31 971.00 971.00 29.13 1000.13

12 14.40.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 g. Nos 2 130 14.40.2 380.00 380.00 11.4 391.40

13 13.46 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75mm outlet, hubless centrifugally cast (spun) each 2 1st Addedendum 13.46 475.00 475.00 14.25 489.25

14 K030 D Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 :3.4 K030D HDPE Grade PE80-PN10.0,110mm dia m 490. M 5 122 K030 D 490.00 490.00 14.7 504.70

15 T-130A Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover Nos 5 187 T-130A 4374.00 4374.00 131.22 4505.22

16 T-130C Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Nos 5 187 T-130C 3864.00 3864.00 115.92 3979.92

17 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 20mm nominal OD pipes M 2 1st Addedendum 13.31.2 239.00 239.00 7.17 246.17

18 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 25mm nominal OD pipes M 2 1st Addedendum 13.31.3 316.00 316.00 9.48 325.48

Asst. Executive Engineer, Executive Engineer,

PWD,SUB DIVISION ,CHIKODI PWD,DIVISION,CHIKODI

#REF! SR Rate Issue Rate Diff

Sl No Specifications Item No Page No Unit Basic Rate Add Diif in cost Total 6% wtge Total Rate

Basic rate Constant Amount Diff. Amt ( PWD SR Bgm circle

1 Earth work for lowering and levelling the ground other than foundation works by mechanical means upto 3.00 depth, including providing shoring strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required & utilising / transporting the remaining earth upto 1.00 km lead. Including the cost of labour & HOM as per drawing and technical specification. 2.24 8 cum 61.00 61.00 3.66 64.66 ( PWD SR Bgm circle Page no. 8 Item no. 2.24)

2 Earth work excavation for foundation of structures upto 3 mtrs. by mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising I transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM etc., complete. -do- In all types of soils 2.23.1 6 Cum 52.00 52.00 3.12 55.12 ( PWD SR Bgm circle Page no. 6 Item no. 2.23.1)

3 Earth work excavation for foundation of structures upto 3 mtrs. by mechanical means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising I transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM etc., complete. '- do - Soft rock I Ordinary Rock (Without blasting) 2.23.2 8 Cum 68.00 68.00 4.08 72.08 ( PWD SR Bgm circle Page no. 8 Item no. 2.23.2)

4 KSRB 4-1.2 : Providing and laying in position plain cement concrete of Mix 1:3:6 with OPC @ 220 kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465 cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2 4.2 13 Cum 5281.00 1034.00 4.400 4247.00 1249.60 5496.60 329.80 5826.40 ( PWD SR Bgm circle Page no. 13 Item no. 4.2)

5 KSRB 4.2.1 Providing and laying in position reinforced cement concrete of Design Mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers@ 3 liters confirming to IS 9103-1999 reafirmed- 2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 4.10 14 cum 5859.00 1598.00 6.800 4261.00 1931.20 6192.20 371.53 6563.73 ( PWD SR Bgm circle Page no. 14 Item no. 4.10)

6 KSRB 4.2.7: Providing and laying in position reinforced cement concrete of design Mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers @ 3 Lts confirming to IS 9103-1999 Reaffirmed - 2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, lintles, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 4.12 14 Cum 6092.00 1598.00 6.800 4494.00 1931.20 6425.20 385.51 6810.71 ( PWD SR Bgm circle Page no. 14 Item no. 4.12)

7 KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 4.28 16 Sqm 255.00 255.00 15.30 270.30 ( PWD SR Bgm circle Page no. 16 Item no. 4.28)

8 KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per Specification. Specification No. KBS 4.6.2 4.30 16 Cum 435.00 435.00 26.10 461.10 ( PWD SR Bgm circle Page no. 16 Item no. 4.30)

9 KSRB 4-6.11 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete as per specificaiton.Specification No. KBS 4.6.2 (PWDSR 2018-19 P.No.17 I.No.4.38) 4.38 17 Sqm 501.00 501.00 30.06 531.06 ( PWD SR Bgm circle Page no. 17 Item no. 4.38 )

10 KSRB 5. 1-3: Providing and constructing Granite / trap / basalt rubble stone masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at 2mtr apart in each course including cost of materials, labour, curing complete with all lead & lift as per specifications. KBS 5.1.12 KSRB 5.1-3: - do -with cement mortar 1:6 5.3 25 Cum 3627.00 387.75 1.650 3239.25 468.60 3707.85 222.47 3930.32 ( PWD SR Bgm circle Page no. 25 Item no. 5.3)

11 KSRB 4-1-2 : Providing and laying in position plain cement concrete of mix 1:2:4 with OPC cement @ 240kgs, with 20mm and down size graded granite metal, coars aggregates @ 0.69cum and fine aggregtes @ 0.459 cum machine mixed, concrete concrete laid in layers not exceeding 15 cms, thick, well compacted, in foundation including cost of all materials, labour, HOM, of machinary, curing complete as per specifications. 4.6 13 Cum 5525.00 1128.00 4.800 4397.00 1363.20 5760.20 345.61 6105.81 ( PWD SR Bgm circle Page no. 13 Item no. 4.6)

12 KSRB 6-1.3 : Providing and constructing burnt brick masonry cement mortar 1:6 for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 3.5 Newton per sqm with cement mortar including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 6.3 29 Cum 6025.00 282.00 1.200 5743.00 340.80 6083.80 365.03 6448.83 ( PWD SR Bgm circle Page no. 29 Item no. 6.3)

13 KSRB 6-7 : Construction of partition wall 11.2 cms thick with non modular ground moulded burnt bricks of class designation with cement mortar 1:4 including providing and fixing plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at 7.5 m. c/c including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 KSRB6-7.1 : -do -with bricks of class designation 3.5 Newton per sqmm 6.23 30 Sqm 812.00 42.30 0.180 769.70 51.12 820.82 49.25 870.07 ( PWD SR Bgm circle Page no. 30 Item no. 6.23)

14 KSRB 4.2.11 : Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 27.20kgs, with 12mm and down size graded granite metal coarse aggregates @ 0.05865 cum and fine aggregtes@ 0.0391 cum, with super plasticisers @0.225 1ts, machine mixed, well compacted for plain chajja of 8.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM finishing, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 4.20 15 Sqm 500.00 127.84 0.544 372.16 154.50 526.66 31.60 558.26 ( PWD SR Bgm circle Page no. 15 Item no. 4.20)

15 KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @ 0.05175 cum and fine aggregtes @ 0.0345 cum, with super plasticisers @ 0.225 1ts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM finishing, curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6 4.19 15 Sqm 444.00 112.80 0.480 331.20 136.32 467.52 28.05 495.57 ( PWD SR Bgm circle Page no. 15 Item no. 4.19)

16 KSRB 4-6.10 : Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specification, Specification No. KBS 4.6.2 4.37 17 Sqm 320.00 320.00 19.20 339.20 ( PWD SR Bgm circle Page no. 17 Item no. 4.37)

17 KSRB 4-6.13 :Providing and removing, centering, shuttering, strutting, propping etc., and removal of form work for vertical fins and vertical sun breakers including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 4.40 17 Sqm 595.00 595.00 35.70 630.70 ( PWD SR Bgm circle Page no. 17 Item no. 4.40)

18 KSRB 4-6.2: Providing and removing centering, shuttering, strutting, propping etc., and removal of from work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specification. Specification No. KBS 4.6.2 -do- 0 to 5 mts 4.29.2 16 Sqm 396.00 396.00 23.76 419.76 ( PWD SR Bgm circle Page no. 16 Item no. 4.29.2)

19 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications. Specification No. KBS 4.6.3 - do - TMT bars Fe 500 4.46.2 18 Tonne 70306.00 49068.38 1.075 21237.63 63352.98 84590.60 5075.44 89666.04 ( PWD SR Bgm circle Page no. 18 Item no. 4.46.2)

20 KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square / rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 4.32 16 Sqm 456.00 456.00 27.36 483.36 ( PWD SR Bgm circle Page no. 16 Item no. 4.32)

21 KSRB 4-6.7 : Providng and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, BEAMS haunchings, cantilever girders, bressumers and LINTELS not exceeding 1 m in depth including cost of all materials, labour complete as per specification. Specification No KBS 4.6.2 4.34 17 Sqm 292.00 292.00 17.52 309.52 ( PWD SR Bgm circle Page no. 17 Item no. 4.34)

22 KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with lead upto 50 m and lift upto 1.5 m. including cost of all labour complete as per specifications. Specification. No. KBS 2.9 2.10 7 Cum 201.00 201.00 12.06 213.06 ( PWD SR Bgm circle Page no. 7 Item no. 2.10)

23 KSRB 9.4-1 : Providing wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM complete as per specifications. Specification No. KBS 9.33 KSRB 9.4-4 : -do -White Sal wood frames 9.13 53 Cum 53284.00 53284.00 3197.04 56481.04 ( PWD SR Bgm circle Page no. 53 Item no. 9.13)

24 KSRB 9.5 : Providing and fixing in position fully panelled Honne wood shutters for doors, with styles and rails of 40 mm. thick with bottom and lock raiIs 180mm wide top rail and styles 100 mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM complete as per specifications. (excluding cost of fixtures) Specification No. KBS 9.34 9.15 53 Sqm 4615.00 4615.00 276.90 4891.90 ( PWD SR Bgm circle Page no. 53 Item no. 9.15)

25 KSRB 9-27 Fixing of frames in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. KSRB 9-21.1 : -do- Fixing of door frame 9.80 60 No. 1369.00 1369.00 82.14 1451.14 ( PWD SR Bgm circle Page no. 60 Item no. 9.80)

26 Providing and fixing factory made single leaf! rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized lsopthalic Gelcoat and on layer of 45 gsm E-Giass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29 mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mm x 32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White / Ivory / Beige / Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot. 9.93 62 Sqm 3000.00 3000.00 180.00 3180.00 ( PWD SR Bgm circle Page no. 62 Item no. 9.93)

27 Providing and fixing 65 mm x 90 mm GRP Doorframe fabricated using E-Giass Chopped Strand Mat (CSM). U V-stabilized lsopthalic Gelcoat and lsopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 61ocations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement Six Numbers of 260mmx25mmx5mm sizeS shaped M.S. flat hold fast shall be provided with the frame. 9.95 63 Rmtr 450.00 450.00 27.00 477.00 ( PWD SR Bgm circle Page no. 63 Item no. 9.95)

28 3 track x 2 Panel with mesh Specification for uPVC windows Providing & fixing of 3track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum Ti02 (Titanium Dioxide) at 6PHR with TPV (Thermo Plastic Vulcanized) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame havinga overall size of 108 mm width x 45 mmheight with reinforcement of 1 mm thickness and Sash with overall size of 39 mm x 75 mm with Gl reinforcement of 2mm and mesh sash of size 30mm x 48.5mm. Glazing bead for fixing of glass shall be of size 20 mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2 mm-2.5 mm. Maximum possible size - 2419 mm x 2119 mm. 38.44.7 309 Sqm 5675.00 5675.00 340.50 6015.50 ( PWD SR Bgm circle Page no. 309 Item no. 38.44.7)

29 Specification for uPVC ventilator with fixed louvers Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum Ti02 (Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with Gl reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size - 1000mm x 1000mm. 38.44.2 309 Sqm 3632.00 3632.00 217.92 3849.92 ( PWD SR Bgm circle Page no. 309 Item no. 38.44.2)

30 KSRB 1.9 : Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM complete as per specifications. Specification No. KBS 7.12 7.9 34 Kg 95.00 95.00 5.70 100.70 ( PWD SR Bgm circle Page no. 34 Item no. 7.9)

31 KSRB 7.1 : Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mm x 10mm x 2mm braced with flat iron diagonals 20mm x 5mm size, with top and bottom rails ofT iron sections of 40 x 40 x 6 mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5cms openings at 10 ems. c to c applying a priming coat of red lead paint cost of materials, labour, HOM complete as per specifications. size of gate 2.4 m x 1.4 m Specification No. KBS 7.1 33 Sqm 5210.00 5210.00 312.60 5522.60 ( PWD SR Bgm circle Page no. 33 Item no. 7.1)

32 KSRB 15-3.7: Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. KSRB 15-3.8 : -do - cement mortar 1:4 15.16 116 Sqm 260.00 0.150 7.35 267.35 16.04 283.39 ( PWD SR Bgm circle Page no. 116 Item no. 15.16)

33 KSRB 15. 3-2 : Providing 12 mm thick cement plaster in single coat with cement mortor 1:4 to brick masonry including rounding off corners wherever required smooth rendering, ; providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. KSRB 15 -3.2 : -do - cement mortar 1:4 15.10 115 Sqm 203.00 23.03 0.098 179.97 27.83 207.80 12.47 220.27 ( PWD SR Bgm circle Page no. 115 Item no. 15.10)

34 KSRB 15.8.3: Providing and fixing suitable plaster mesh 200mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, JUnction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment) 15.36 117 M 36.00 36.00 2.16 38.16 ( PWD SR Bgm circle Page no. 117 Item no. 15.36)

35 Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc , Complete as per specification. 14.45 109 sqm 975.00 975.00 58.50 1033.50 ( PWD SR Bgm circle Page no. 109 Item no. 14.45)

36 Providing and fixing Vitrified glazed tiles of approved make, quality& colour of size 900 x 900 x 12mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and Jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc., Complete as per specification. 14.45.1 109 Sqm 1136.00 1136.00 68.16 1204.16 ( PWD SR Bgm circle Page no. 109 Item no. 14.45.1)

37 Providing and laying flooring using prepolished, gang saw / water cut 19 mm thick granite laid with a bed of 20mm thick 14 cm & Jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials, mortar and labours etc., complete as per specifications. -do- using silver grey granite / Multy Red / Ruby Red / Black / HassanGreen / River Pink Granite of width not less than 1200mm 14.47.1 109 Sqm 2737.00 2737.00 164.22 2901.22 ( PWD SR Bgm circle Page no. 109 Item no. 14.47.1)

38 Providing and laying Hassan Green / River Pink granite flooring for staircase, treads and rises using pre polished 20 mm thick water cut green Granite slab laid over existing cement concrete bed in CM 1:3, average 20 mm thick including full rounding for nosing, cutting 3line grooves not more than 2 mm wide for antiskidding, including cost of all materials, mortar, labour, curing etc., complete as per specification. 14.51 110 Sqm 4447.00 4447.00 266.82 4713.82 ( PWD SR Bgm circle Page no. 110 Item no. 14.51)

39 Providing and laying flooring for corridors / lobbies using combination of pre polished 19 mm thick water cut / gang saw Grey Granite, Black Granite, and strips of 50mm wide pre flamed grey granite using pre polished grey granite 19 mm thick 76%, Pre polished black granite19mm thick @ 2% and preflamed 19mm thick grey granite @ 22% over existing cement concrete bed in CM 1:4 average 20 mm thick pointed with white cement / colour pigment etc., including cost of all materials, mortar, labour, curing etc., complete as per specification. _do_ using 19mm thick granite width not less than 1200mm. 14.48.1 110 Sqm 2619.00 2619.00 157.14 2776.14 ( PWD SR Bgm circle Page no. 110 Item no. 14.48.1)

40 KSRB 14.14-5: Providing Ceramic tiles of approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1 3 mix, flush pointing with white cement usingcolour pigment , including cost of materials, labour, curing, complete as per specifications. Specification No. KBS _do_ for Ceramic Tiles of size 30 x 30cms, 6mm thick 14.36.2 108 Sqm 1208.00 44.65 0.190 1163.35 53.96 1217.31 73.04 1290.35 ( PWD SR Bgm circle Page no. 108 Item no. 14.36.2)

41 KSRB 14-17.2: Providing skirting, dadoing, rises of steps with colour glazed tiles on 10 mm thick cement plaster 1:3 and Jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No. KBS 14.16, 14.17 Colour glazed tiles 30x45 cms 6mm thick with border of size 30 x 10 cms. 14.41.3 108 Sqm 1273.00 42.30 0.180 1230.70 51.12 1281.82 76.91 1358.73 ( PWD SR Bgm circle Page no. 108 Item no. 14.41.3)

42 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and leveling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per specification Area to be considered -(a) 100% for fresh surface (b)Upto 10% for repainting (Page No. 126-Item No 15.106) 15.106 128 Sqm 78.00 78.00 4.68 82.68 ( PWD SR Bgm circle Page no. 128 Item no. 15.106)

43 KSRB 15-17.5 : Applying priming coat over new wood surface and/ or wood based surface after preparing the surface after thorughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting liquid wood fillter, for varnish including cost of materials, labour, complete as per specificaitons. 15.59 121 Sqm 50.00 50.00 3.00 53.00 ( PWD SR Bgm circle Page no. 121 Item no. 15.59)

44 KSRB:- 15-17.6: Providing and applying painting two coats (excluding priming coat ) on new wood surface and /or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials labour complete as per specification. 15.60.1 121 Sqm 97.00 97.00 5.82 102.82 ( PWD SR Bgm circle Page no. 121 Item no. 15.60.1)

45 Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil,grease,dirt and other foreign matter including cost of all materials, labour, complete as per specifications 15.74 123 Sqm 95.00 95.00 5.70 100.70 ( PWD SR Bgm circle Page no. 123 Item no. 15.74)

46 KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer I.NO 15.51.2 15.51.2 119 Sqm 90.00 90.00 5.40 95.40 ( PWD SR Bgm circle Page no. 119 Item no. 15.51.2)

47 KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer & KSRB 15-15.2: Extra over Item KSRB 15-15.1 for painting two coats with plastic emulsion paint of approved brand and shade on ceiling and I or sloping roof as per specifications. 15.51.2 & 15.51.3 119 Sqm 95.00 95.00 5.70 100.70 ( PWD SR Bgm circle Page no. 119 Item no. 15.51.2 & 15.51.3)

48 Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. (P.No. 125 I.No. 15.104) 15.104 127 Sqm 180.00 180.00 10.80 190.80 ( PWD SR Bgm circle Page no. 127 Item no. 15.104)

49 Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and 15.105 127 Sqm 439.00 439.00 26.34 465.34 ( PWD SR Bgm circle Page no. 127 Item no. 15.105)

50 KSRB13-8 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 13.2.15.1 I 13.9 for internal water supply connection KSRB13-8.2 - do - 25 mm dia 13.67 95 m 129.00 129.00 7.74 136.74 ( PWD SR Bgm circle Page no. 95 Item no. 13.67)

51 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM and testing complete as per specifications. -do- 110 mm dia 12.116.1 90 m 434.00 434.00 26.04 460.04 ( PWD SR Bgm circle Page no. 90 Item no. 12.116.1)

52 KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25 mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 12.5 79 Each 4956.00 4956.00 297.36 5253.36 ( PWD SR Bgm circle Page no. 79 Item no. 12.5)

53 KSRB 11-11.1 : Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 12.23 82 Each 4007.00 4007.00 240.42 4247.42 ( PWD SR Bgm circle Page no. 82 Item no. 12.23)

54 KSRB 11-7.1 : Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm with 5 litres PVC automatic flushing cistern, C. I I M.S brackets, standard flush pipe and C P. brass spreaders with brass unions and G.l. clamps complete painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 12.7 80 Each 3072.00 3072.00 184.32 3256.32 ( PWD SR Bgm circle Page no. 80 Item no. 12.7)

55 Providing and fixing Cl Nahani trap of approved make conforming to lSI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). -do- 12.5cms x 7.5cms 12.113.2 90 Each 285.00 285.00 17.10 302.10 ( PWD SR Bgm circle Page no. 90 Item no. 12.113.2)

56 KSRB13-6.1 Providing and fixing in position brass bib cock of approved quality nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.2/13.3 KSRB13-6.1-2- do- 20 mm dia nominal bore 13.24 93 Each 173.00 173.00 10.38 183.38 ( PWD SR Bgm circle Page no. 93 Item no. 13.24)

57 KSRB 11-15.1 : Providing and fixing 600x450mm bevel lead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C. P screws, washers, including cost of materials, labour complete as per specifications. 12.39 84 Each 1157.00 1157.00 69.42 1226.42 ( PWD SR Bgm circle Page no. 84 Item no. 12.39)

58 KSRB 12-8.1 : Constructing brick masonry inspection chamber for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C I cover withframe (light duty) internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R. C. C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS -do- 600x600mm and 450mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1 5, C I cover withframe (light duty) 600x600mm 11.50.1 75 Each 7064.00 7064.00 423.84 7487.84 ( PWD SR Bgm circle Page no. 75 Item no. 11.50.1)

59 Providing & fixing Door locks of approved make & quality including cost & conveyance of all materials lead lifts etc complete 386 XV Each 347.46 347.46 0.00 347.46 ( PWD SR Bgm circle Page no. XV Item no. 386)

60 Providing & fixing Handles power coated 150 mm including cost & conveyance of all materials lead lifts etc complete 388 XV Each 50.85 50.85 0.00 50.85 ( PWD SR Bgm circle Page no. XV Item no. 388)

61 Providing & fixing Hinges 5" of approved make & quality including cost & conveyance of all materials lead lifts etc complete 390 XV Each 31.36 31.36 0.00 31.36 ( PWD SR Bgm circle Page no. XV Item no. 390)

62 Providing & fixing MS oxidised MS Hold fasts for doors including cost & conveyance of all materials lead lifts etc complete 391 XV Each 32.20 32.20 0.00 32.20 ( PWD SR Bgm circle Page no. XV Item no. 391)

63 Providing & fixing Locking arrangements including cost & conveyance of all materials lead lifts etc complete 392 XV Each 550.85 550.85 0.00 550.85 ( PWD SR Bgm circle Page no. XV Item no. 392)

64 Providing and fixing tower bolts of sizer 300 mm Long approved make and quality including cost and conveyence of all maerials with all lead and lift. etc complete 407 XIV Each 101.69 101.69 0.00 101.69 ( PWD SR Bgm circle Page no. XIV Item no. 407)

65 Providing Screws 1.75" approved make and quality including cost and conveyence od all materials with all lead and lift .etc complete 845 XXXIII Each 1.69 1.69 0.00 1.69 ( PWD SR Bgm circle Page no. XXXIII Item no. 845)

66 Providing and fixing Screws 3.5" approved make and quality including cost and conveyence of all maerials with all lead and lift. etc complete 844 XXXIII Each 3.39 3.39 0.00 3.39 ( PWD SR Bgm circle Page no. XXXIII Item no. 844)

67 Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of and electrical charges, etc., complete as per specifications. 7.38 45 Sqm 6021.00 6021.00 361.26 6382.26 ( PWD SR Bgm circle Page no. 45 Item no. 7.38)

68 ProvidingPolyethylene water storage tank of specified capacity and make including cost and conveyence od all materials with all lead and lift .etc complete 679 XXVI L 5.08 5.08 0.00 5.08 ( PWD SR Bgm circle Page no. XXVI Item no. 679)

Assistant Executive Engineer, Executive Engineer,

PWD Sub-Division, Chikkodi PWD Division, Chikkodi

lb1 #REF! #REF!

lb2 #REF! #REF!

lb3 #REF! #REF!

lb4 #REF! #REF!

lb5 #REF! #REF!

VENEER PANELING MEASUREMENT SHEET

S.No. Details Unit Nos. L B Qty

NAME OF WORK: Proposed Construction Of Ganig Samajada Samudaya Bhavan At Indi In Indi Taluk, Vijayapur District Continued work

Sl No Description Item code Unit Quantity Rate Amount Mile Stone no.1 Mile Stone no.2 Mile Stone no.3

Ist Month IInd Month IIIrd Month Total IVth Month Vth Month VIth Month Total VIIth Month VIIIth Month IXth Month Total

Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial Physical Financial

1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.3 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m3 2.896 6095.540 17651.71 2.8958 17651.71 2.90 17651.71 0.00 0.00 0.00 0.00 0.00 17651.71 0.00

2 Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 t smooth wheeled roller, complete as per clause 310. m3 0.000 0.00 0.00 0.0000 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

3 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. m3 4.344 6936.02 30128.41 4.3438 30128.41 4.34 30128.41 0.00 0.00 0.00 0.00 0.00 30128.41 0.00

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m2 4.34 3468.01 15064.20 4.3438 15064.20 4.34 15064.20 0.00 0.00 0.00 0.00 0.00 15064.20 0.00

5 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 6.66 8186.44 54525.23 6.6604 54525.23 6.66 54525.23 0.00 0.00 0.00 0.00 0.00 54525.23 0.00

6 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m3 36.34 7667.32 278599.74 36.34 278599.74 36.34 278599.74 0.00 0.00 0.00 0.00 0.00 278599.74 0.00

7 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m3 11.00 1045.45 11499.95 11.00 11499.95 11.00 11499.95 0.00 0.00 0.00 0.00 0.00 11499.95 0.00

8 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and choped mat. door frame laminate shall be 2mm thick and shall be filed with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides M.S stay shall be provided at the bottom to steady the frame m3 13.200 885.80 11692.56 13.20 11692.56 13.20 11692.56 0.00 0.00 0.00 0.00 0.00 11692.56 0.00

9 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. m3 4.32 3744.05 16174.30 4.32 16174.30 4.32 16174.30 0.00 0.00 0.00 0.00 0.00 16174.30 0.00

10 12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m3 2.880 5890.57 16964.84 2.88 16964.84 2.88 16964.84 0.00 0.00 0.00 0.00 0.00 16964.84 0.00

11 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. m3 1193.940 188.49 225045.75 1193.94 225045.75 1193.94 225045.75 0.00 0.00 0.00 0.00 0.00 225045.75 0.00

12 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m3 1784.594 260.59 465047.30 267.69 69757.09 624.61 162766.55 892.30 232523.65 892.30 232523.65 892.30 232523.65 0.00 0.00 0.00 465047.30 0.00

13 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m3 2841.63 103.00 292687.49 2841.63 292687.49 2841.63 292687.49 0.00 0.00 0.00 0.00 0.00 292687.49 0.00

14 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m3 858.321 301.79 259032.75 429.16 129516.38 429.16 129516.38 429.16 129516.38 429.16 129516.38 0.00 0.00 0.00 259032.75 0.00

15 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m3 44.06 911.55 40166.54 44.06 40166.54 44.06 40166.54 0.00 0.00 0.00 0.00 0.00 40166.54 0.00

16 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m3 36.00 1430.67 51504.12 0.00 0.00 36.00 51504.12 36.00 51504.12 0.00 0.00 0.00 51504.12 0.00

17 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m3 94.47 142.14 13428.48 94.47 13428.48 94.47 13428.48 0.00 0.00 0.00 0.00 0.00 0.00 0.00 13428.48 0.00

18 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m3 172.46 143.17 24690.81 172.46 24690.81 172.46 24690.81 0.00 0.00 0.00 0.00 0.00 24690.81 0.00

19 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m3 2841.626 162.74 462446.23 426.24 69366.93 1704.98 277467.74 2131.22 346834.67 710.41 115611.56 710.41 115611.56 0.00 0.00 0.00 462446.23 0.00

20 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 858.32 179.22 153828.33 858.32 153828.33 858.32 153828.33 0.00 0.00 0.00 0.00 0.00 153828.33 0.00

21 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. t 334.8000 581.95 194836.86 50.22 29225.53 167.40 97418.43 217.62 126643.96 117.18 68192.90 117.18 68192.90 0.00 0.00 0.00 194836.86 0.00

22 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. m2 14.4060 4123.09 59397.23 14.41 59397.23 0.00 14.41 59397.23 0.00 0.00 0.00 0.00 0.00 0.00 0.00 59397.23 0.00

23 Providing flooring with 25mm thick polished Cuddapah slabs usingcement mortar 1:6, 25mm thick over existing cement concrete bed ortop of roof laid to line and level and jointed with cement slurry mixedwith pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications. m2 7.88 1695.38 13351.12 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.88 13351.12 7.88 13351.12 13351.12 0.00

24 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Nos 11 105.06 1140.89 0.00 0.00 0.00 0.00 0.00 0.00 10.86 1140.89 10.86 1140.89 1140.89 0.00

25 By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (v) For Grading -V Material m2 5.79 2429.77 14072.45 0.00 0.00 0.00 0.00 5.79 14072.45 5.79 14072.45 14072.45 0.00

1 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. m3 162.990 7005.38 1141807.55 0.00 0.00 81.50 570903.77 81.50 570903.77 162.99 1141807.55 0.00 0.00 1141807.55 0.00

2 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 43.938 4903.77 215461.68 0.00 0.00 43.94 215461.68 43.94 215461.68 0.00 0.00 215461.68 0.00

3 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% m3 60.66 4203.23 254970.59 0.00 0.00 60.66 254970.59 60.66 254970.59 0.00 0.00 254970.59 0.00

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% m3 5.364 3152.42 16909.59 0.00 0.00 5.36 16909.59 5.36 16909.59 0.00 0.00 16909.59 0.00

5 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m3 53.03 3502.69 185738.65 0.00 0.00 53.03 185738.65 53.03 185738.65 0.00 0.00 185738.65 0.00

6 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 180.654 8268.30 1493702.73 0.00 0.00 90.33 746851.37 90.33 746851.37 180.65 1493702.73 0.00 0.00 1493702.73 0.00

7 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 17.19 1070.47 18406.17 0.00 0.00 8.60 9203.09 8.60 9203.09 17.19 18406.17 0.00 0.00 18406.17 0.00

8 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. T 17.930 94109.70 1687386.91 0.00 0.00 8.97 843693.45 8.97 843693.45 17.93 1687386.91 0.00 0.00 1687386.91 0.00

9 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0.8888 102797.24 91361.05 0.00 0.00 0.89 91361.05 0.89 91361.05 0.00 0.00 91361.05 0.00

10 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 6.00 1055.90 6335.43 0.00 0.00 0.00 0.00 6.00 6335.43 6.00 6335.43 6335.43 0.00

11 12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) No. 26 5949.48 152068.60 0.00 0.00 25.56 152068.60 25.56 152068.60 0.00 0.00 152068.60 0.00

12 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. m 231.43 190.37 44057.70 0.00 0.00 0.00 0.00 231.43 44057.70 231.43 44057.70 44057.70 0.00

13 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 846.80 263.20 222875.03 0.00 0.00 846.80 222875.03 846.80 222875.03 0.00 0.00 222875.03 0.00

14 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 1133.72 104.03 117940.74 0.00 0.00 1133.72 117940.74 1133.72 117940.74 0.00 0.00 117940.74 0.00

15 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 756.38 304.81 230552.06 0.00 0.00 0.00 0.00 756.38 230552.06 756.38 230552.06 230552.06 0.00

16 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 59.40 587.77 34913.51 0.00 0.00 0.00 0.00 59.40 34913.51 59.40 34913.51 34913.51 0.00

17 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 52027.784 141.48 7360932.50 0.00 0.00 0.00 0.00 52027.78 7360932.50 52027.78 7360932.50 7360932.50 0.00

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Note: Minimum 50% of the required machinery should be owned by the Tenderer. Remaining 50% of the required machinery may be owned / procurred on Lease basis / Hire basis.

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

6 Items executed :

Earth work excavation :

UCR/SSM/B.B.M :

P.C.C / R.C.C :

Alluminium & Steel work (Doors, Windows & Partition) :

Address for correspondence:

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/ excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Year Name of work Name of Employer Quantity of work performed Remarks (Indicate contract reference)

2017-18 Earth work excavation & Filling

Alluminium & Steel work (Doors, Windows & Partition)

Electrical items

2018-19 Earth work excavation & Filling

Alluminium & Steel work (Doors, Windows & Partition)

Electrical items

2019-20 Earth work excavation & Filling

Alluminium & Steel work (Doors, Windows & Partition)

Electrical items

2020-21 Earth work excavation & Filling

Alluminium & Steel work (Doors, Windows & Partition)

Electrical items

2021-22 Earth work excavation & Filling

Alluminium & Steel work (Doors, Windows & Partition)

Electrical items

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Financial Year Total value of works executed and payments received in the last five years (in Rs. lac)

Billed upto date during 2023-24