New Construction of Noorpur Chajlet Km 4 to Kanmbhore road

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Including labour cess but excluding GST.)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Including labour cess, Royalty but excluding GST.)

Providing, laying and spreading Material on a prepared sub grade, adding cement @ 2% by weight to the spread Material manually, mixed in place with rotavator and comacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. (Including labour cess, Royalty but excluding GST.)

Providing, laying and spreading Material on a prepared sub base, cement @ 4% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired uncomfired compressive strength and to form a layer of base. (Including labour cess, Royalty but excluding GST.)

Providing and applying tack coat with bitumen VG-10 grade using bitumen distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. (Including labour cess but excluding GST.)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness by manual means composed of 13.2 mm to 5.6 mm aggregates using VG-10 Grade Bitumen bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (Including labour cess, Royalty but excluding GST).

Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. As per MORD Specification clause 510 Sr. No. 5.12A. (Including labour cess, Royalty but excluding GST).

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6. (Including labour cess, Royalty but excluding GST.)

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 Sr. No.1203 I. Brick masonry in 1:3 cement mortar. (Including labour cess, Royalty but excluding GST.)

Plastering with cement mortar (1:3) 15 mm thick on brickwork in parapet as per technical specifications Clauses 613.4 and 1208.4 (Including labour cess, Royalty but excluding GST.)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 III. P.C.C. grade M 20 (i) Nominal mix (1:2:4). (Including labour cess, Royalty but excluding GST.)

Providing and laying 350 mm dia NP3 RCC Hume pipe in position i/c cartage loading, unloading etc. complete. (Including labour cess but excluding GST.)

Providing and laying 600 mm dia NP3 RCC Hume pipe in position i/c cartage loading, unloading etc. complete. (Including labour cess but excluding GST.)