Construction of Strom Water Drain and Culvert at Ganapathy Pudur 6th Street and 3rd Street Ration Shop Cut in Ward No 29, North Zone

Dismantling the damaged RCC slab.,

Earth work Excavation in all soild with initial lead and lift etc., complete for drain

Plain Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete complying with standard specification.

Centering with steel centering for revertment, drain and culvert upto 1.20m depth using MS sheet of size 0.9 x0.6m 10 gauge thick and stiffened with MS 'L' angle wood runners of size 0.075 x 0.05 three rows with support by casurina pulleys 0.075 cm at 0.45 m length including cost of nails etc.,

Plain Cement concrete 1:3:6 (one cement, two sand and four aggregate ) using 20mm gauge hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete fixtures in CC works wherever necessary as directed by departmental officer etc., complete.

Plastering with cement mortar 1:5(one cement and five sand) 12mm thick in all floors complying with standard specifications.

Centering with steel shutters including studding with sides and support etc., for drain as per the direction of departmental officers etc., complete

Supply and fabrication of R.T.S. rods in various dia including cutting bending placing in position and tying as per the direction of departmental officers.

Reinforced cement concrete of 1:1.5:3 mix (one cement, one and half of sand and three of aggregate) using Machine crushed hard broken granite stone jelly 20mm for RCC works in all types of foundation footings columns, Floor beams, slabs of all shapes (excluding cost of providing centering and fabrication of reinforcements which shall be measured and paid under separate items but including curing Etc. and including fixing fan clamps or hooks, after lying of electrical canduit pipes, junction boxes wherever required complete, complying with standard specificaions as directed by the engineer.

Supplying and fixing of SFRC man hole cover complete complying with standard specification.