GE (N) P/TN - 12 OF 24-25SPE REP TO BLDG NO 115 ( QTR N0 115/B, 115C, 115D BLDG NO 110 QTR NO 110/11) ( EXCEPT ROOF TREAT) OTHER RANK MD ACCM OF 109 INF BN AT KOLHAPUR MIL STN AND WM WKS IN THE AREA OF AGE B/R (E) AND AGE E/M (N) UNDER GE (N) PUNE

Amount

Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed

-Ditto- all as per above but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed

S&F 30 mm thick Flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed

M&L for 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, plain, chamfered or rounded, fitted with cut and initred beads for securing glass with stiles and rails for window and ventilators as specified in SSR Part-I section-8 clause 8.24(b) complete all as specified and directed

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, complete as per ISI mark all as specified and directed .

Refixing in same opening of shutter exc 1 Sqm and n.exc 2 Sqm each after necessary repairs in the same opening all as specified and as directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, complete as per ISI mark all as specified and directed .

M&L PCC 1:3:6 Type C1 using 20 mm graded aggregate as in filling of chowkats, window bed blocks etc complete all as specified and directed

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section fixed with stainless steel screws complete all as specified and directed.

S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws complete all as specified and directed.

S&F 300 mm dia aluminium sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube etc complete all as specified and directed .

S&F factory Made Solid PVC Moulded particle board core Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed

S&F of stainless steel butt hinges 75 mm size with mild steel hinge pin bright polished fixed with CP screws complete all as specified and directed

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm long complete all as specified and directed

S&F aluminium, anodised, cast type door handle 125mm size complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded aggegate) as in flooring finishing the cement even and smooth with using extra cement complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete.

S&F Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified.

S&F of 40mm bore waste coupling of PTMT (half or full threaded) minimum weight 60gms incl waste pipe complete all as specified and as directed.

-Ditto- all as per item No 23 above but 32mm bore.

S&F sinks with drainage board made of stainless steel 01mm thick kitchen or laboratory with drainage board with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

M&L Cutting holes into brick / concrete walls built in cement mortar and making good in cement concrete 1:2:4 type B-1 in superficial area n exc 150 sq cm complete all as specified and directed

S&F in repairs PVC floor trap 75 mm dia with grating fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repairs PVC (SWR) soil, waste and vent pipes, 110 mm dia, in any length , single socketed, jointed with rubber ring joints/adhesive, fixed to wall, with PVC clamps, ISI marked complete all as specified and directed NOTE:(i)The measurement of pipes shall be net as fixed between the fittings including short lengths, without any allowance for cutting and waste or for the portions of pipes entering the sockets of the adjacent pipe or fitting.(ii) Fittings and accessories such as bends, branches, sockets etc. shall be measured separately.(iii) Rates include for all necessary extra joints, cutting and waste.

S&F in repairs PVC (SWR) bends, 110mm bore, any radius complete all as specified and directed.

Supply and fixing of Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified & as directed.

S&F of PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair of fancy type chromium plated swivel shower for fixing with 15mm pipe complete all as specified and directed.

S&F in repair of fancy type chromium plated Shower arm 15mm size,minimum 195mm long with bend of 45 degree with flange complete all as specified and directed

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair fancy type, chromium finish stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repairs pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.

Taking out old rusted/unsv steel windows/ventilators shutter with guard bar with fly proofing shutter and other section etc and removing same from work site complete including necessary cuttings in brick walls all as directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5 x 52 x1.5mm thick ,blades set, with provision of exhaust fan using aluminium sections heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aparture 1.40mm fixed with flat iron/wooden flats staple with nut & bolts etc complete all as directed.

All as per Item No. 44 above but from wooden frame with and including wooden beads 2nd class hard wood n.exc 3.00 sq cm cross section complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters; walk ways, railings frame work of water tanks and similar wors conforming to Fe-290. Gde E-165.

M/L for preparation of old or new steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new or old wooden based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer exceeding 10 cm width or girth complete all as specified and directed.

Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed

M&L for rendering 10 mm thick cement plaster on faces of brick or concrete surfaces in cement mortar(1:6) finished even and fair without using extra cement , including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and directed.

M&L for rendering 15mm thick plastering in CM (1:4) for fair finished without using extra cement complete all as specified and directed.

M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil distemper over one coat of white wash complete all as specified and as directed.

M/L fpr preparation of newly plastered surfaces of wall and applying two coat of 100 % weather proof acrylic exterior emulsion paint over one coat of primer complete all as specified and as directed.

M&L Preparation of old surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old ceiling surfaces of walls all as specified and directed.

M&L for complete removal of existing finish/treatment on walls, preparing surface and make surface free from loose particles, oil stains etc and applying two coat of 100 % weather proof acrylic exterior emulsion paint over one coat of primer complete all as specified and as directed.

M&L complete removal of existing tretment on wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying two coats of oil bound distemper over one coat of primer on old surfaces of walls all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 450x 7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM 1:3 and demolition of existing tiles , complete all as specified & directed.

M&L coloured Vitrified Double Charge tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in in CM (1:4) and demolition of existing tiles complete all as specified.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick(square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm as floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:4) and demolition of existing tiles complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and polishing and edge moulding complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

S&F stainless steel plate rack of size 900mm x 600mm x 250mm made of 1mm thick stainless steel sheet including provision of three different sizes of plates shelves for cups and saucers etc and hook, fixed to wall with chromium plated brass screws all complete as specified and as directed. (Make : Anupam Industries (Blue star)/ Prayag/Nirali).

Dismantling 1000 litres capacity PVC water tanks all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 3 layer black/white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F of ball valves of 20mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms)

S&F in repairs particle board of 12 mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cupboard shutters including teak wood leaping externally complete all as specified and as directed.

S&F in repairs particle board of 18 mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cupboard shutters & shelves including teak wood leaping externally complete all as specified and as directed.

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil complete all as specified and as directed.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation complete all as specified and as directed.

M&L for Hardcore of stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm size stone agreegate in sub-base of floor complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils complete all as specified and as directed.

Removing excavated material not exc. 250mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point complete all as specified and as directed.

M&L old size brick fly ash bricks straight or curbed on exc 6M mean radius built in CM 1:6 complete all as specified and as directed.

S&F rolled mild steel sections Fe-410-W(Gde-E-250)quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed

S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall and two corrugated side overlap fixed with self taping screws as specified .

M&L position suspended false ceiling system using T- grid suspended ceiling grid system. The size of grid shall be 600x 600mm with GI frame work main runner 38x24mmx3600mm, cross tee 25x24x600mm / 25x24x1200mm and wall angle 24x24x2540mm (thickness of the material of 0.30 mm) , using 9mm thick ceiling panel laminated with PVC film on front face and foil back avilable in due drop texture aas per IS -2095, part-I-1996, fixed in the grid of T- grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as specified and directed by Engr - in- charge ..Make:- Geproc / armstrong.

S & F Brass Chromium plated towel rail all as specified and directed. Make: Jaquar Cat No AEC-1111B or of equivalent make as per Appx 'A' as approved by GE

Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing one complete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.

S&F factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S & F brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, all as specified and directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx 'A' as approved by GE

S&F stainless steel butt hinges 100mm complete all as specified and directed. NOTE:- all screws shall be self tapping chrome plated and length of screws not less 38mm coplete all as directed and specified.

M&L Cutting chases, pinning in, making good to facings where required in stone walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelve, lintels etc and cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

M&L GI tubing 20mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade complete all as specified and directed.

S&F PVC (SWR) floor Trap, plain with grading of dia outlet 100mm dia incl fixing complete all as specified and directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

S&F PVC (SWR)vent cowl of size 110mm bore complete all as specified and directed.

S&F glass shelf 450mm x 150 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets complete aii as specified and as directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified.

M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including demolition of existing tiles complete all as specified. make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and directed.

S&F Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified. Cera/Prayag/Johnson Pedder.

Supply and fix factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement MS TMT bars 6mm dia @ 150mm centre to centre both ways and set in CM 1:4 and handles including demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Material and labour for cutting into existing manhloes for connecting new drains,making good to pipe and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in PCC (1:2:4) type-B-1 , Smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 150mm bore including packing under the haunching against the sides of pipes after they are laid complete all as specified and directed.

S&F for 150mm dia reinforced concrete pipes,class NP-2 laid and jointed complete all as specified and directed.

S&F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe complete all as specified and as directed.

S&F vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. Make : Cera/Prayag/Johnson Pedder.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 and demolition of existing tiles complete all as specified and directed.

S&F Vitreous china squatting pan Orissa pattern wash down water closet white of size 580x440 mm, with integral foot rests complete with P or S trap, PVC flushing cistern high level 10 liters capacity , valve less, symphonic action type complete with inlet ball valve, float and handle including brackets for flush tank, 32mm dia PVC flush pipe, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, including concrete bedding etc. complete all as specified and directed

Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with PVC surface boxes of suitable module, earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed

Description all as per112 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

S&F Modular Switch - 10A X 1 Way switch one module complete all as specified and as directed.

S&F Modular Switch -10A X 2 Way switch one module complete all as specified and as directed.

S&F Modular Bell push - 10A Bell push switch one module complete all as specified and as directed.

Supply and fixing Modular Switch - 16AX 1 Way switch with indicator one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module Shuttered type complete all as specified and as directed.

S & F Modular socket outlet multipurpose, 6/16 Amps shuttered type, 2 module complete all as specified and as directed.

S&F, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

S&F modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

Fixing only serviceable ceiling rose, obtained from item No 122 here-in-after complete all as specified and as directed.

S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed

Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed

S&F 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.

S&F Surface mounted spotlight in matt finish for premium aesthetics complete all as specified and as directed

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed.

S&F die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 20 Watt LED lamp including lamp complete all as specified and as directed

S&F decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: E-27 7W x 1 complete with all accessories prewired all as specified and directed ncluding provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed .

S&F ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, without remote canopy and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan complete all as specified & as directed.

S&F exhaust fan, AC single Phase, working on input voltage 140-285 , of size 200 mm sweep, 1600 RPM, Power consumption16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .

Taking down chowkat or frame ( Wooden) / Steel not exc. 1.5 sq. m and removing to store complete all as specified and as directed

S&F for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

S&F for aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix electric water heater, storage type shock proof with Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, BEE Star rated complete with all accessories such as safety valve, thermostate, NRV, including 65 cm ( 02 Nos) heavy duty inlet and outlet chromium plated flexible stainless steel pipes, shock safe safety plug connected with 3 core cable of suitable size / length, including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department.. Make- Bajaj (Calenta digi ) , Jaquar (Meta - Digi) Racold (Omnis Lux Digi) V Guard (Calino DG, Digital)

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including PVC conduit and conduit accessories heavy duty ISI marked complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store from site and fixing or Hanging in existing position after proper cleaning , replacing unserviceable fan condenser 2.5 MFD and connecting up including provision of cable from ceiling rose or connector to fan after room plaster, colour complete all as specified and as directed.

Supply and fixing USB Charger 3000 mA 1 module type complete all as specified and as directed.

Supply and fixing TV Coaxial socket and connector 1 module

S & F PVC rigid non-metallic conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed

Design, manufacture, supplying, installing in correct aligned position, making proper connections, testing and commissioning of LV panels (for metre board ) suitable for 415V, 3 phases, 4 wire, 50 Hz power distribution system, indoor type, IP42 rating free standing, floor/wall mounting, sheet metal clad, cubicle, dustand vermin proof type compartmentalized design, fabricated out of 16 SWG CRCA sheet steel, complete with copper bus bars, separate earth bus bar to be provided through out the length of the panel with incoming and outgoing feeders accommodated in a modular multitier arrangement and interlocked to avoid paralleling, adequate size cable alley, painting, earthing, numbering including danger plate etc as required as per specifications and drawings and comprising of and including the following complete all as specified and as directed Incoming: 160 A FP MCCB 25 KA ( Make L&T Cat No CM90634OOMO) - 01 No Metering & Indication: VAF + PF meter with RS485, Cl 1 - one (1) No (Make L&T Cat No- WL411011OOOO) one (1) set of RYB phase indication lamps with 2 A backup MCB

Busbar: 200 A 4 strip Copper busbar insulated with heat shrinkable sleeves and shall be colour coded Outgoings One (01) No. 32 A SPN MCB 10 KA Four (04) Nos. 40 Amps TPN MCB 10 KA Digital Electronic KWH Meter (i) Energy meter 1P 5-40A Cl 1 DIN -01 No ( Make L& T Cat No- WD4000101OOO) (ii) Energy meter 1P 10-60A Cl 1 DIN - 04 Nos Make L&T Cat No- WD4000101OOO or equivalent in Secure, Panasonic, HPL

Note:- (a) 4 Nos meter compartments for three phase meter & 01 No compartments for single phase meter shall be provided with the acrylic sheet window complete with locking arrangement but without locks as required . (b) Meter board shall be got approved from Garrission Engineer along with drawing before installation. (c) Removing of old energy meter from unsv panel boards after disconnecting and depositing to MES store Yard shall be done by the contractor without any extra cost from the department (d) Earth work, Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation for grouting of LT panel and finishing the surface with extra foam work shall be provided by the contractor without any extra cost from the department and rate for which is deemed to be included in the unit rate quoted

M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalent in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Earth pit PVC ( Square) cover Copper strip 20x3 mm and 40 mm dia protection pipe up to 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing

Supply, passing through pipe and fixing Radio Guide (RG-6 ) flexible Coaxial audio video oxygen free four layer , water proof, solid copper conductor Aluminium -mylar foil and copper braiding, 75 Ohm Impedience cable ( as in connection for Digitial Cable TV) including Gold RCA Sub woofer type Plug, connector Etc. complete all as specified and as directed. Note- PVC Pipe will be measured and paid seperately under relevant item of schedule, however rate for connector shall deemed to be included in the unit rate quoated .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Supply and fixing 24 Watt LED high quality design PC Batten fitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.

Supply and fixing 10 Watt LED High quality aluminium extruded fitting with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and necessary mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc , as approved, complete all as specified and as directed.

Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1200 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO)

S & F sheet metal enclosure MCB DB SPN 4 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S&F exhaust fan steel body AC single phase, 230vof size 300m sweep with blades and frame and louvers including making connections with provision of flexible wire 23/0.0076 twin core copper conductor from ceiling rose/ connector to fan complete all as specified & as directed

M&L for PVC connection pipe (copper) chromimum plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450mm suitable for hot/ cold water system complete all as specified and as directed .

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

GULMOHAR CONSTRUCTION (BID ID -3107610)

SHRIYA CONSTRUCTION (BID ID -3101965)

m/s Pravin s Bhosale (BID ID -3121916)