Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹46.9 L+₹91,630.15 (1.99%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹47.3 L+₹1.3 L (2.88%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹47.4 L+₹1.4 L (3.15%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹47.4 L+₹1.5 L (3.24%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
COMPREHENSIVE MAINT TO BLDGS OF GROUP II UNITS LOC
2024_MES_650419_2
8729/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D
Category a (i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹90,000
2 Sept 2024
1 Jul 2024
18 Jul 2024
1 Jul 2024
16 Jul 2024
8 Jul 2024
1 Jul 2024 - 3 Jul 2024
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.
Dismantling asbestos cement (Corrugated or semicorrugated) sheets in roof covering etc complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed.
M & L Water Proofing treatment on RCC roof etc comprising with the following operations and as specified herein below :- (a) Taking down/scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m. (b) 15mm thick plastering in cement mortar 1:4 mixed with WPC @3% by weight of cement finished even & smooth and curing for minimum 7 days (c) Preparing & Cleaning of fully dried cement plastered surface (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm conforming IS 3384-1986 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 Kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above application of polymeric membrane shall be by torch application. The over lap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction.
Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts etc complete all as specified and as directed.
S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws etc complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.
S&F for 4 mm thick veneered decorative Plywood (no of ply 05), grade-I (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and directed.
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm etc complete all as specified and as directed.
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer. in tint etc complete all as specified and as directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc complete all as specified and as directed.
M & L for cement concrete type C-2, (1:3:6) (using 40mm graded stone aggregate) as in surface channels and drains etc complete all as specified and as directed.
M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement etc complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing etc complete all as specified and as directed.
M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemnt with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per Item No. 20.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per Item No. 22.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 .
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per Item No. 24.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4.
M&L for glazed ceramic coloured tiles of size 300mm X 200mm X 7-8mm/350x250x 7mm/ 450mmX350mmx 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match shade of tiles over and including 10mm thick CM (1:4) backing coat etc complete all as specified and directed.
Demolition of brick work including all quoins arches pillars etc built in cement mortar etc complete all as specified and as directed.
M&L for brick work in cement mortar (1:6) using sub class 'B' bricks(using old size burnt bricks) straight or curved on plan exc 6.0 m mean raidus etc complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks (using old size burnt bricks) straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, etc complete all as specified and as directed.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even,complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:6 brick or concrete surfaces of wall finished fair and even with out using extra cement etc complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface complete all as specified and directed
Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over a coat of primer complete all as specified and as diredted by Engineer-in-Charge .
M&L for Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
M&L for PCC (1:3:6) type C-2 (using 40mm graded stone agg) 75mm thick etc complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone agg as in leveling course etc complete all as specified and as directed.
M&L for chequered cement concrete tiles 300x300x25mm thick laid over and including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description not exceeding 1 Sqm each etc complete all as specified and as directed.
M&L for preparing surface of wood and wood based matreials, new or old, of any description and girth and treaed with tar or coal tar black paint and sanding newly tarred surfaces with clean sharp sand etc complete all as specified and as directed.
S&F Post, joist, channel, angle or tee section fixed independently without connection plates etc conforming to Fe-410- W (Gde-E-250) quality A etc complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW etc complete all as specified and as directed.
Refixing of Shutter of any description exc 1 sqm and n exc 2 sqm each etc complete all as specified and as directed.
S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.
S&F for factory made second class hardwood 35 mm thick plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed.
S&F for factory made second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats etc complete all as specified and as directed.
S&F for factory made second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening etc complete all as specified and as directed.
S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site etc complete all as specified and as directed.
S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc complete all as specified and as directed.
S&F for providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall be provided with windows etc complete all as specified and as directed.. The aluminium extruded section shall be of make Jindal/Hindalco/Halco extrusions etc all as listed. Note:- Glazing and Stainless steel wire mesh will be paid seperately.
S&F aluminium anodised grill with mesh size 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc, aluminium section 15 micron thick anodizing complete all as specified and directed.
S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane etc complete all as specified and as directed.
Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty etc complete all as specified and as directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and etc complete all as specified and as directed.
M&L for prelaminated particle board 12mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in pelmet boxes or in narrow widths not exceeding 15 cm each, rebated or flat edged including 6mm thick teak wood lipping allround etc complete all as specified and as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size etc complete all as specified and as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size etc complete all as specified and as directed.
S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed etc complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolt 150mm long of extruded section and fixed etc complete all as specified and as directed.
S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed etc complete all as specified and as directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size etc complete all as specified and as directed.
S&F in repairs/new Mortice lock,vertical type Brass 2 levers, size 100 mm etc complete all as specified and as directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size etc complete all as specified and as directed.
S&F Harrison rails, 20mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repairs etc complete all as specified and as directed.
S&F in repair/new for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair/new floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed.
M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and as directed.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.
M & L for preparation of newly untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and as directed.
S&F in repair 15mm bore bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.
S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws etc complete all as specified and as directed.
S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) etc complete all as specified and as directed.
S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed.
S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.
S&F in repairs for 15mm dia of pipe Angle valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed.
S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket etc complete all as specified and as directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed.
S & F in repairs Vitreous China Urinal, full stall type, white incl urinal spreader (excluding flushing cistern, flush pipe and waste pipe etc complete all as specified and as directed.
Taking down PVC/AC/Salt glazed ware pipes and fittings upto 110mm etc complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor etc complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor etc complete all as specified and as directed.
S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and as directed.
S&F of 110mm dia PVC (SWR) bends etc complete all as specified and as directed.
S&F 75mm PVC(SWR) bends any radius with access door etc complete all as specified and as directed.
S&F of 75 mm dia PVC (SWR) Vent cowl etc complete all as specified and as directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and as directed.
Taking up or down steel tubing and connections including fittings for 15 mm bore GI tubing etc complete all as specified and as directed.
Taking up or down steel tubing and connections fittings for 20 mm bore GI tubing etc complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and as directed.
S & F waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover etc complete all as specified and as directed.
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, complete all as specified and directed.
Supply and fixing in repairs vitreous china squatting pan water closet,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistertn and flush pipe etc complete all as specified and as directed.
S&F in repairs CP wall mixer (3 in 1) etc complete all as specified and as directed.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia etc complete all as specified and as directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated fancy type (ISI Marked) etc complete all as specified and as directed.
S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star).
S & F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.
S&F PVC waste pipe, 32mm bore, 750mm long for basin and urinal alongwith all fittings fixed in repair, etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site etc complete all as specified and as directed.
(a) One light controlled by one, one way switch.
(b) One Ceiling fan/ Exhaust fan point controlled by one, one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin socket outlet 5 Amps on the switch Independent board
(e) One bell point controlled by one, one way switch .
All as per item No- 121.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
M&L for Switch Piano, flush type single pole, one way 5 Amps etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush typeetc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/square block etc complete all as specified and as directed.
M&L for replacement of Bell AC 230 volts musical type etc complete all as specified and as directed.
M&L for bell push switch 5 amps piano type flush type etc complete all as specified and as directed.
M&L for replacement 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting up with flexible copper cable from ceiling rose to the light fitting etc complete all as specified and as directed.
All as per item No 131.00 here in before but LED tube light fitting 9 Watt etc complete all as specified and as directed.
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block for lamp holder incl taking down old unsv light fitting etc complete all as specified and as directed.
M&L for LED lamp 9 Watt suitable for lamp holder fittings incl taking down old unsv led lamp etc complete all as specified and as directed.
Repair/Replacement of Modular Switch 1 way 6A,1 module etc complete all as specified and as directed.
Repair/Replacement of modular switch 1 way 16A, 1 module etc complete all as specified and as directed.
Repair/Replacement of Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.
Repair/Replacement of Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.
Repair/Replacement for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed.
Repair/Replacement for modular white cover plate with frame 1/2 module etc complete all as specified and as directed.
Repair/Replacement for modular white cover plate with frame 3 module etc complete all as specified and as directed.
Repair/Replacement for modular white cover plate with frame 6 module etc complete all as specified and as directed.
Repair/Replacement for modular white cover plate with frame 8 module etc complete all as specified and as directed.
Repair/Replacement for Plastic surface boxes 1/2 module etc complete all as specified and as directed.
Repair/Replacement for Plastic surface boxes 3 module etc complete all as specified and as directed.
Repair/Replacement for Plastic surface boxes 8 module etc complete all as specified and as directed.
Supply and fixing for piano switch single pole 5A, one way etc complete all as specified and as directed.
M&L for switch socket combination 2 in 1, 3 pin 5 A Flush etc complete all as specified and as directed.
M&L for switch socket combination 2 in 1, 3 pin 5 A/16A Flush etc complete all as specified and as directed.
Supply and fixing for socket outlet 5 pin 6A, 230 volt flush type etc complete all as specified and as directed.
Supply and fixing for fan regulator 100/120 wall step type AC 220 volt etc complete all as specified and as directed.
Supply and fixing for PVC switch board 10"x12" suitable for switch socket etc complete all as specified and as directed.
Supply and fixing for PVC switch board 8"x10" suitable for switch socket etc complete all as specified and as directed.
All as per item No 153.00 (here-in-before) but PVC switch board 8" x 6" etc complete all as specified and as directed.
All as per item No 153.00 (here-in-before) but PVC switch board 7"x4" etc complete all as specified and as directed.
All as per item No 153.00 (here-in-before) but PVC switch board 4" x 4" etc complete all as specified and as directed.
M&L for replacement of PVC cassing & caping 20/25 mm etc complete all as specified and as directed.
All as per item No 157.00 (here-in-before) but in 25/32 mm etc complete all as specified and as directed.
M&L for replacement of PVC conduit 20mm (One length equals to 3 M) complete all as specified and as directed.
All as per item No 159.00 (here-in-before) but PVC confuit 25mm
Supply and fixing for engagement LED 0.5w light red, green, etc complete all as specified and as directed.
M&L for sub main wiring Casing caping two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.
M&L for sub main wiring Casing caping two run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.
M&L for MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs etc complete all as specified and as directed.
M&L for MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB etc complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity etc complete all as specified and as directed.
All as per item No 166.00 (here-in-before) but SPN 4 Way .
M&L for in Replacement of MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB etc complete all as specified and as directed.
M&L for MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series etc complete all as specified and as directed.
M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series etc complete all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size incl taking down etc complete all as specified and as directed.
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting incl taking down etc complete all as specified and as directed.
M&L for Garden light LED 8w bamboo type of 1 mtr long IP65 energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source making good to the disturded surfaces by providing cement conrete M-15 (1:2:4) 20mm aggregate complete all as specified and as directed Make :Havells/Bajaj/CG/Philips
M&L for Flexible copper wire 23/76 wire complete all as per specified and directed.
Taking down and Supply and fixing PVC Exhaust fan PVC 200 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area etc complete all as specified and as directed. Note : Old Exhaust fan deposit to MES AGE(E/M) Store
All as per item No 175.00 (here-in-before) but 250 mm sweep single phase 50 Hz AC complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.Old Exhaust fan deposit to MES AGE(E/M) Store
All as per item No 177.00 (here-in-before) but of size 450 mm sweep heavy duty complete all as specified and as directed.Old Exhaust fan deposit to MES AGE(E/M) Store
Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor power input 27 watt with 10% tolerance , motor insulation B type , 230-240V 50Hz AC supply 350 rpm , 225 CMM air delivery service value minimum 7.4 with complete set 3 blade , canopy, down rod , Shackle remaining all accessories including nut & bolt washer as required etc complete all as specified and as directed. Note : Old Ceiling fan shall be deposited MES Store (AGE E/M)
Supply and fixing Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.Note : Old Wall mounted fan shall be deposited to MES Store (AGE E/M)
S&F Fan capacitor of capacity 2.5 MFD (Make: Universal/Usha) etc complete all as specified and as directed.
S&F Ball bearing/Bush bearing suitable for ceiling fan, of any sweep. Make of bearing-TATA,NBC,SKF (6201 to 6204) etc complete all as specified and as directed.
S&F Fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm etc complete all as specified and as directed.
Supply , Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology for inner tank with incoloy heating element with minimum 4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with etc complete all as specified and as directed.
Supply and fixing for Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold and hot (set of two) water line with adopter and washer at both ends of the pipe etc complete all as specified and as directed.
Supply and fixing for Indicator lamp round/rectangular complete all as specified and as directed.
Supply and fixing for Thermostat for geyser 30 to 75 degree centigrade etc complete all as specified and as directed.
Supply and fixing for Auto cut-off electric water heater geyser temperature controlling sensor any capacity complete all as specified and as directed.
Supply and fixing for Push type copper heating element of 1.5 KW capacity complete all as specified and as directed..
Supply and fixing for 15 Amp plug Top suitable for 15 amp socket complete all as specified and as directed.
M&L for 2.5 Sqmm wire 3 Core for geyser connection complete all as specified and as directed.
Supply and fixing for metal fasteners of 12mm dia x100mm long for fixing geyser etc complete all as specified and as directed.
Cleaning of geysers any type and size/make all as specified and directed by Engr-in-Charge.
SK SINGH
Asha Engineering Enterprises
Rameshwar Prasad
das enterprises
SHRI MADAN SINGH
SHRI BANARSI PRASAD
M/S RAHUL TRADING CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .