SPECIAL REPAIR OF UNIT SWIMMING POOL AND PROVN OF UNDERGROUND CABLE AND EXTERNAL WATER SUPPLY PIPE LINE AT CHHEOKI

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable, CI pipe line, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

cutting of road metal surface for passing of pipe lines in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for CI pipe line, etc. n exc 10 Sqm on plan and n exc 1.5 m in depth and making good the road surface with 150mm thick layer of compacted stone aggregate and existing thickness bituminous macadam or PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point all as specified & directed

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick all as specified & directed.

Supply & laying of unreinforced precast concrete cable cover class HVP, Type 2 with peak, flat of size 450mm x180 mm x 40 mm complete all as specified & directed.

Supply and spreading clean, dry, fine river sand for UG electric cable in two layers (8 cm thick before laying the cable & 15 cm thick after laying cable ) total 23 cm thick including gently punning around cable for protection of underground cable complete all as specified and directed. ( Note:- Only punned thickness shall be measured for payment).

Taking out XLPE cable 11 KV of size 120 Sqmm 3 core from trench and relaying serviceable cable after meggering to another position of trench complete all as specified and directed. Note:-Excavation, cable protection cover, cable joint, sand cushioning shall be measured and paid separately under respective item.

Supply, jointing and testing cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 11KV XLPE armoured aluminium conductor cable of size 95 Sqmm 3 core complete all as specified and directed. Note:- Joint kit shall not be three months old from date of manufacturing.

Supply, jointing and testing cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 11KV XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm 3 core complete all as specified and directed. Note:- Joint kit shall not be three months old from date of manufacturing.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) FRLS with aluminium conductor, 11000 volts, grade'E' of cross sectional area 95 Sqmm 3 Core (Earthed) complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) FRLS with aluminium conductor, 11000 volt grade'E' of cross sectional area 120 Sqmm 3 Core (Earthed) complete all as specified and directed.

Supply, installation, commissioning and testing of switch air break, gang operated, triple pole vertical mounted, out door type of 12 insulator, mechanically operated mounted on insulators and steel frame with operating rod of 25 mm bore GI pipe heavy grade, mechanism worked from ground level for current rating upto 400 Amps 11000 volts with locking arrangement including brass pad locks with key and other accessories complete all as specified and directed.

Supply and erection of 2 pole structure on 11 meter steel tubular pole consisting of anticlimbing device, including PCC foundation & cross arms including danger board, spike etc complete all as specified & directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sq mm 3.5 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items

Taking up cast iron water mains 150mm bore pipe including all fittings with spigot socketed end and lead joints, incl burning out joints and recovering lead complete and relaying the serviceable cast iron pipe including cleaning, cutting or reducing length as required in new or old location complete all as specified and directed. Note:- Earth work and run lead joints shall be measured and paid separately.

Supply, laying, jointing and testing of 150 mm bore cast iron pipe with spigot and socket ends centrifugally cast class "LA" in any length conforming to IS, in any length, jointing with lead joints complete all as specified and directed. Note:- Earth work and run lead joints shall be measured and paid separately.

M&L for cast iron sluice valve 150 mm dia with stainless steel spindles with flanged ends duly ISI marked confirming to IS 780 part 1, PN-1.6 type including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

Supply only water proofing compound complete all as specified & directed.

S & F 80 mm bore light grade galvanized iron tubing ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc laid in trenches or fixed on wall protection pipe complete all as specified and directed

Supply and laying old size fly ash sub class “B” bricks , neatly laid adjacent to each other with axis of bricks perpendicular to the axis of cable for cable protection complete all as specified and directed.

Supply , laying , connecting and testing LT 1100 volt grade electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured (heavy duty) ISI marked with aluminium stranded conductor gross sectional area 70 Sqmm , 3.5 core laid in trenches / duct / pipe etc including taking out existing cable complete all as specified and directed . (Note:- Earthwork & excavation shall be measured & paid separately under respective items)

Supply , laying , connecting and testing LT 1100 volt grade electric cable XLPE insulated, screened, PVC bedded, galvanised steel strip armoured (heavy duty) ISI marked with aluminium stranded conductor gross sectional area 6 Sqmm , 4 core laid in trenches / duct / pipe etc including taking out existing cable complete all as specified and directed . (Note:- Earthwork & excavation shall be measured & paid separately under respective items)

M&L for Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron strip of size 32 x 6mm as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing not less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing , all as shown on electric plate No. 03 of SSR-2009 Part-I as in repair complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre.2. Earth filling shall be done by vegetable soil.3. Soil should be free from stone, boulders, aggregate, gravels etc.

Supply and fixing in replacement post top lantern LED type 20 W 220 Volt AC outdoor type with decorative post top for 230 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed .

Supply, fixing , connecting to electrical system & testing of busbar panel board ,cubical type for out door use, made out of 3.15 mm thick CRCA sheet factory made, totally enclosed of size not less that 900x600x500mm and supported with 4 Nos MS Angle legs , duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gasket and sealed mounted on PCC blocks double door type with locking arrangement with handle at front and open able at front &back both side with required hinges heavy duty, compartmentalised suitably including provision for tapping incoming & outgoing electric connections with suitable size of aluminium lugs glands and comprising of the following accessories :-Incoming :- (a) MCCB 63Amp 36KA -01 Set Outgoing:- (a) MCB TPN 63 Amps -02 Set. (b) High conductivity aluminium busbar (Set of 4 strips), 4 Nos TPN of 200 amps rating (RYB) for phase and 1 No for neutral mounted on DMC support with heat shrink sleeve-1 Set. , (b) Phase indication lamp, LED type(set of 3) -1 Set (c) Ammeter analog type having measuring range (0-300) Amps with CTs etc including rotary switch to measure load of each phase : L&T/Seimens (d) Replacement of volt meter having measuring range (0-500) volt with rotary switch to measure voltage of phase R.Y.B make : L&T/AE (e) Grouting of panel including earth work as required PCC 1:3:6 type D-2 using 20 mm graded stone aggregate & plastering in CM 1:4 etc complete

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover reinforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces complete including taking down of existing point wiring all as specified and directed for the following :- Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.

One point for socket outlet 5 amp same board.

All as per Srl item No. 27 above but for one 3 pin socket outlet 15 amps, independent, with cables 2.5 Sqmm size on independent board 2.5 Sqmm earth wire complete all as specified and directed.

S&F ceiling rose surface type bakelite 65 X 50 mm three terminal complete all as specified and directed.

S&F switch piano, flush type 5 amps, single pole, one way 230 volt complete all as specified & directed.

S&F socket outlet suitable for 3/ 5 pin , 5 Amp, 230 volt complete all as specified & directed.

S&F in replacement of switch socket combination 2-in-1, 3 pin, 6 and 16 Amp flush type 240 Volts, complete all as specified and directed.

Supply, fixing, connecting & testing LED batten fittings 2 feet 10 Watt lumen output 130 lumen/watt , PF≥0.95 mounted luminaries having IP 65 protection and THD<10% with complete all as specified and directed.

Supply, fixing, connecting & testing T8 TLED fittings lumen output 130 lumen/watt , PF≥0.95 mounted luminaries suitable for Armstrong /grid ceilings light of 20 Watt having IP 65 protection and THD<10% with complete all as specified and directed.

Supply, fixing, connecting & testing ceilings light 2x2 luminiare suitable for armstrong /grid ceilings light of 36 Watt having IP 65 protection lumen output 110 lumen/watt , PF≥0.95 and THD<10% with complete all as specified and directed.

M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable four single core of size 6.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable four single core of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

Supply & fixing TPN MCB Distribution Box of 12 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & fixing MCB with MCB TPN,100 Amps 440 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.

Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed

Taking down main switches fuse unit, MCB/Kit kat distribution board with steel enclosure along with MCB’s /Kit kat fuse of any amps/ways including wooden board or from steel board and making good disturbed surfaces complete all as specified & directed.

Taking down existing old /worn out ceiling fan/Exhaust of indoor type fixed of any type/size with its all accessories including lamp complete all as specified & directed ( Note: Item to be deposited into MES store )

Supply & fixing DB with single phase & neutral MCB Distribution Box of 8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & fixing MCB with MCB SP, 06 to 40 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply & fixing MCB with MCB SPN, 63 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply & fixing ceiling fans complete with blades ,down rods , electronic regulator and accessories ,230V ,1200mm sweep .min air delivery 210 CFM with service valve 6.00 BEE .three star rated with brushless direct current ( BLDC) complete all as specified and directed.

Supply and fixing LED Bldg security light fitting 35watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed

Supply & fixing exhaust fans steel body AC single phase 230 volts of size 300mm sweep with ,blades and frame and louvers complete all as specified and directed.

Taking up/out cast iron water mains including all fittings with spigot and socketed ends or flanged ends including burning out lead joints or dismantling flanged joints for pipe 80 mm bore complete all as specified and directed. Note: (i) Excavation and earth work shall be measured and paid separately.(ii) Lead joints shall be burnt out carefully so as to recover the old lead maximum for reuse.

Taking up/out cast iron water mains including all fittings with spigot and socketed ends or flanged ends including burning out lead joints or dismantling flanged joints for pipe 100 mm bore complete all as specified and directed. Note: (i) Excavation and earth work shall be measured and paid separately.(ii) Lead joints shall be burnt out carefully so as to recover the old lead maximum for reuse.

Supply, laying, jointing & testing for 25 mm bore galvanized steel water tubes, 'medium grade', galvanized with new fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserviceable existing pipe complete all as specified & directed.

Supply, laying, jointing & testing for 40 mm bore galvanized steel water tubes, 'medium grade', galvanized with new fittings & accessories such as Tee, elbow, bend, socket, reducer etc, laid in trenches including taking out old/ unserviceable existing pipe complete all as specified & directed.

M&L for cutting of existing pipe and making bends ( any type , radius and angle ) tapers any type ,( straight, bend, increasing, decreasing or double socket etc) tee pies single branch Y junction , double branch , cross upto 150mm bore, complete all as specified and directed.

S & F Gun metal Globe or gate valve 25 mm bore with iron wheel head , screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply, laying, jointing and testing of 80 mm bore cast iron pipe with spigot and socket ends centrifugally cast class "LA" in any length conforming to IS, in any length, jointing with lead joints complete all as specified and directed. Note:- Earth work and run lead joints shall be measured and paid for separately.

Supply, laying, jointing and testing of 100 mm bore cast iron pipe with spigot and socket ends centrifugally cast class "LA" in any length conforming to IS, in any length, jointing with lead joints complete all as specified and directed. Note:- Earth work and run lead joints shall be measured and paid for separately.

M&L for cast iron sluice valve 80mm dia with stainless steel spindles with flanged ends duly ISI marked confirming to IS 780 part 1, PN-1.6 type including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

M&L for cast iron sluice valve 100mm dia with stainless steel spindles with flanged ends duly ISI marked confirming to IS 780 part 1, PN-1.6 type including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

Opening the filter tank of size length 4 feet and dia 8 feet of capacity 10000 gallon of swimming pool and removing old supporting media and filter media carefully including cleaning/washing the empty tanks all specified and directed by Engr-in-Charge.

Supply, transporting & filling in SILICA SAND 4/8, 8/16, 16/32 all specified and directed by Engr-in-Charge.

Supply, transporting & filling Pebbles 40-50 mm dia all specified and directed by Engr-in-Charge.

Supply, transporting & filling grabbles 20-30 mm dia all specified and directed by Engr-in-Charge.

Supply, transporting & filling grabbles 10-15 mm dia all specified and directed by Engr-in-Charge.

M&L preparation of old paint surfaces of inner and outer wall of filter tank & panels and applying two coats of Japanic paint complete as all specified and directed by Engr-in-Charge.

S&F in Replacement of Filter base PVC pipe jet (Pipe Size 50 mm) all specified and directed by Engr-in-charge.

Supply, fixing ,testing & commissioning suction sweeper motor comprising of AC 3 phase induction motor 415 volts,50Hz,1.5KW/3.1 amps 2800RPM complete all as specified and directed.

Repair/Overhauling / unserviceable squirrel cage induction/centrifugal pump motor of swimming pool including electric motor 3HP/5 HP, 3 phase, 415 Volts, disconnecting the electric connection and dismantling the motor. Cutting the burnt winding and cleaning the slots with non greasy materials and rewinding with PVC insulated copper wire as per existing size with insulating material, complete reassembling the motor, repair and overhauling of pumps, replacement of bearing, remetaling of gun metal impeller, grinding, polishing, greasing complete all as directed and testing complete to entire satisfaction of Engr-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in roofs, floors, beams, staircase, landing, chhajjas and similar suspended works complete all as specified and directed.

Demolition of brick wok built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified and directed.

Demolition of PCC in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specified and directed.

M&L for brick work with sub class B; bricks ,straight or curve on plan exc 6m mean radius built in cement mortsr 1:6 complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth with out using extra cement complete all as specified

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 using water proofing compound as per manufacturer's instruction finished even and smooth without using extra cement complete all as specified. Note:- Water proofing compound shall be measured & paid separately.

M&L for glazed ceramic coloured tiles in vertical surface 350x250x7mm/450mm x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc.

M&L for non skid ceramic terracotta and ivory coloured square tiles with rectangular grips design pattern of matt finish 10mm thick and size of a tile 300x300mm (good grips series of Johnson Endura heavy duty mat finish or equivalent as specified in P.S.) including 20mm thick screed bed in CM 1:4 complete all as specified & directed.

M&L for non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 Sqm but not exc 4Sqm each all as specified and directed.

S & F in repair bib tap 15mm dia, fancy type chromium plated with long shank & cup (concealed type) screwed end for iron pipes or for union and fixed complete all as specified and directed.

S & F of 12 inch square shower stainless steel head 12 inch highpressure rainfall shower head with polish chrome finish ultra thin water full body coverage with silicon nozzle carry to in clean complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 liters capacity, white with all fittings and fixtures including brackets and 32 mm dia bore PVC flush pipe complete all as specified and directed

S & F in repair stop valve angular type 15mm dia, fancy type chromium plated with long shank & cup (concealed type) screwed end for iron pipes or for unio and fixed all as specified and directed.

S & F of flushing jet for pedestal pan pattern WC including flexible pipe and brass chromium plated nuts, fixed in repairs complete all as specified and directed

S & F of PVC waste pipe 40 mm dia 60 cm long for WHB with cup, fixed in repairs complete all as specified and directed

S&F rectangular bowl wash basin with small counter-top on both sides, provision for overflow and provision for tap hole alongwith waste coupling and bottle trap set with waste outlet complete all as specified and directed. Make: CERA model CLIFF Cat No.S2030125 or equivalent make as specified in CA. NOTE: Provision for counter-top height and basements will prepare and paid separately.

S&F butt hinges medium weight cold rolled mild steel 10mm size fixed in repairs complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp & staple, (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed..

S&F aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles 150 mm size fabricated type, anodised complete all as specified and directed.

S&F in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000mm in width complete all as specified and directed.

M&L for designer, pre polished coloured chequered cement concrete tiles high quality with mixture of grey cement and pigments of size 30cm x30cmx25mm thick set in cement mortar jointed & pointed, laid over 20mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed.

S&F of mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mils steel wire(annealed) not less than 0.90mm dia and securing with clips complete all as specified and directed.

All as per Sl item No. 99 above but 6 to 8mm dia complete all as specified and directed.

M&L for cement concrete type B-1 using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plate, kerbs and likes slightly rounded or chamfered complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 using 20mm graded aggregate as in surface channels and drains complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 using 20mm graded aggregate as in roof kerbs or mud stops, rouded or chamfered on edges complete al as specified and directed

Use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilivers, shelves, including support, overhangs etc complete all as specified and directed.

S&F white coloured waterproof PVC plywood board having a thickness of 18mm thick with smooth glossy finish complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded aggregate as in slabs supported on walls, beams, and columns in floors, roofs landings, balconies ,canopies , deck slabs and in shelves and the like complete all as specified and directed

M&L for 18-20mm thick granite(of any type) work table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including edge moulding and machinery polishing to edge to give high glossy finish complete all as specified and directed

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for Johnson Endura or equivalent swimming pool tiles 247 mm x 122 mm x 8 mm thick coloured for floor / wall fixed with approved adhesive epoxy based using Ardex endura tiles fixing with adhesive compound including all necessary fittings accessories complete (internal cove, external angle junction of three external angle, internal angle of wall - floor junction etc, fixed with using Ardex Endura tiles adhesive compound and gap between tiles to be filled with ardex Endura grout complete all as specified and directed by Engr-in-charge.

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and providing and applying two coat of acrylic exterior emulsion paint in required shade over a coat of primer over & including 3 to 5 mm thick putty on cleaned surface by Mechanical spraying/painting machines) as per manufacturer,s specifacation etc. all complete including all tools, plants scaffolding, safety belts complete all as specified and directed

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and providing and applying two coat of oil emulsion distemper in required shade over a coat of primer over & including 3 mm thick putty on cleaned surface by Mechanical spraying/painting machines) as per manufacturers specification etc. all complete including all tools, plants scaffolding, safety belts complete all as specified and directed

M&L for preparation of old painted surface of steel by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted over a coat of primer mechanically by paint sprayers machine complete all as specified and directed

S&F of steel ventilator with top hung shutter including hinges, steel peg stay, including taking down complete all as specified and directed.

S&F of diving board 5mtr length and 0.50 mtr width of thickness 45-65 mm made up of fibre and have of Burma wood inside and having anti-slippery surface & fulcrum is made up of stainless steel including linear spring of the cantilever type fixed at one end at a hinge complete all as specified and directed.

S&F of swimming pool ladder (skimmer) width of 500mm and 42mm dia pipe, made up of stainless steel Grade-304 with 5 steps complete all as specified and directed.

M&L for heavy duty swimming pool over flow grating, ABS body of approved colour design & pattern and complete all as specified and directed of width of 24-26 cm complete all as specified and directed.

Vibha Enterprises

M/s VIJAY TRADERS

RAMESH ENTERPRISES

Channa Brothers and Co.

M/s SKP CONSTRUCTION