Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC NO 1 RANGAJAN VILLAGE PO BOKULONI CHARIALI MAUZA TIPLING SUB DIVISION TENGAKHAT DIST DIBRUGARH ASSAM 786191 | DIBRUGARH | ASSAM | 786191 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹15.0 L+₹1.7 L (12.5%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance BEING OTHER THAN L1 | |
| 3 | L3₹15.6 L+₹2.3 L (16.9%)Rejected-Finance PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L3 | Rejected-Finance BEING OTHER THAN L1 | |
| 4 | L4₹16.4 L+₹3.0 L (22.7%)Rejected-Finance 1389 RADHETENAMENT SOCIETY SARDAR ROAD SURENDRANAGAR SURENDRA NAGAR GUJARAT 363001 | SURENDRANAGAR | GUJARAT | 363001 | L4 | Rejected-Finance BEING OTHER THAN L1 | |
| 5 | L5₹17.3 L+₹4.0 L (30.0%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L5 | Rejected-Finance BEING OTHER THAN L1 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
10 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
REPAIRS/MAINT OF WATER SUPPLY DISTRIBUTION NETWORK FOR ZONE-I, II AND III AT LEKHAPANI
2023_MES_585542_1
8724/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (ii)
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹30,000
Yes
11 May 2023
13 Mar 2023
17 Apr 2023
13 Mar 2023
10 Apr 2023
27 Mar 2023
Amount
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation, etc. or for taking out/laying of CI/GI pipes etc or for shafts,wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Taking down cast Iron /DI water pipe line 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints for recovering lead including stacking of serviceable pipes aside complete all as specified and as directed.
All as per Item No 4.00 here in before but for 100mm bore of pipe.
All as per Item No 4.00 here in before but for 150mm bore of pipe.
All as per Item No 4.00 here in before but for 250mm bore of pipe.
Relaying of old serviceable cast iron pipe 80 mm bore obtained from serial Item No. 4 here in before with spigot and socket ends in new or old position in any length, laid in trenches after cleaning of inner surface and applying with two coats of black bituminous paint (sutiable for drinking water purpose) including testing complete all as specified and directed.
All as per Item no 8 here in before but for 100 mm bore obtained from serial Item No. 5 here in before
All as per Item no 8 here in before but for 150 mm bore obtained from sserial Item No.6 here in before
All as per Item no 8 here in before but for 250 mm bore obtained from serial no 7 here in before
M&L Cast iron pipes of size 80 mm bore with spigot and socket ends, centrifugally cast, class LA, in any length, laid in trenches including testing complete all specified and as directed.
All as per Item No 12.00 here in before but for 100mm bore of pipe..
All as per Item No 12.00 here in before but for 150 mm bore of pipe.
All as per Item No 12.00 here in before but for 250 mm bore of pipe.
M & L Cast iron fittings upto 150 mm bore of spigot and socketed CI pipes, such as bends (any type, radius and angle), Tappers any type ( striaght, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) Collars, Caps and plugs, connecting piece etc complete all as specified and as directed.
M & L Cast iron fittings from 200 mm to 300 mm bore of spigot and socketed CI pipes, such as bends (any type, radius and angle), Tappers any type ( striaght, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) Collars, Caps and plugs, connecting piece etc complete all as specified and as directed.
M&L Run lead joints for 80 mm bore cast iron pipes and fittings etc., (Spigot and Sockets) including testing complete all as specified and as directed.
All as per Item No 18.00 here in before but for 100 mm bore pipes.
All as per Item No 18.00 here in before but for 150 mm bore of pipe.
All as per Item No 18.00 here in before but for 250 mm bore of pipe.
Taking out from trenches or taking down from wall GI steel tubing and connections, 15 mm bore, setting aside and cleaning the serviceable pipe for re-laying/ re-fixing or removal of unserviceable pipe from site of work complete all as directed. Note: Re-laying/Re-fixing shall be measured and paid seperately.
All as per Item No 22.00 here in before but for 20 mm bore of pipe.
All as per Item No 22.00 here in before but for 25 mm bore of pipe.
All as per Item No 22.00 here in before but for 40 mm to 50 mm bore of pipe.
All as per Item No 22.00 here in before but for 80 mm bore of pipe.
All as per Item No 22.00 here in before but for 100 mm bore of pipe.
Relaying of old serviceable GI pipe 15mm bore obtained from Serial Item No. 22 here in before,laying in new or old position in any length, laid in trenches after cleaning including testing complete all as specified and directed.
All as per Item No 28 above,but for 20 mm bore obtained from Serial Item No. 23 here in before
All as per Item No 28 above,but for 25 mm bore obtained from Serial Item No. 24 here in before
All as per Item No 28 above,but for 40 mm bore obtained from Serial Item No. 25 here in before
All as per Item No.28 above,but for 50 mm bore obtained from Serial Item No. 25 here in before
All as per Item No.28 above,but for 80 mm bore obtained from Serial Item No. 26 here in before
All as per Item No. 28 above,but for 100 mm bore obtained from Serial Item No. 27 here in before
S&F 15 mm bore GI tubing, (medium grade) with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
All as per item No 35.00 here in before but for 20 mm bore of pipe.
All as per item No 35.00 here in before but for 25 mm bore of pipe.
All as per item No 35.00 here in before but for 40 mm bore of pipe.
All as per item No 35.00 here in before but for 50 mm bore of pipe.
All as per item No 35.00 here in before but for 80 mm bore of pipe.
All as per item No 35.00 here in before but for 100 mm bore of pipe.
S&F 20mm bore, ball valves highpressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) as fixed in repairs complete all as specified and directed.
All as per serial item No 42.00 here-in-above but size 25 mm (minimum weight 455 gms)
Supply, install, jointing and testing CI body sluice valve 150 mm bore class PN-1.6, ISI marked (as per IS-14846 of 2000) heavy duty with flanged ends with high tensile stainless steel spindle, iron hand wheel and fixing with nuts, bolts, washers and rubber gasketsheet for packing as fixed in repairs at any position complete all as specified and directed by Engr-in-Charge.
All as per serial Item No 44 above,but of size 100 mm bore
All as per serial Item No 44 above,but of size 80 mm bore
M & L Brick masonry valve chamber of internal size 90 cm x 90 cm x 90 cm by using brick masonry with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata and foundation with 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) including 20 mm thick PCC(1:2:4) type B1(using 20 mm graded stone aggregate) as in coping on top of walls and plastering the internal and external surfaces with 10 mm thick CM ( 1:4) and providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed by Eng-in-charge.
M & L Brick masonry valve chamber of internal size 60 cm x 60 cm x 60 cm by using brick masonry with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata and foundation with 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) including 20 mm thick PCC(1:2:4) type B1(using 20 mm graded stone aggregate) as in coping on top of walls and plastering the internal and external surfaces with 10 mm thick CM ( 1:4) and providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed by Eng-in-charge.
S&F 15 mm bore Gun metal, gate valves, with iron wheel head,screwed both ends for iron pipe or for union as fixed in repairs complete all as specified and as directed.
All as per Item No. 49 above, but size of valve 20 mm bore.
All as per Item No. 49 above, but size of valve 25 mm bore.
All as per Item No. 49 above, but size of valve 40 mm bore.
All as per Item No. 49 above, but size of valve 50 mm bore.
M&L for repairs the any type leakage from joint,bend and Tee in 25/20 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. Note : Excavation, returning filling and removal of soil will be measured and paid under respective Items.
M&L for repairs the any type leakage from joint,bend, socket, reducer and Tee in 40 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. Note: Excavation, returning filling and removal of soil will be measured and paid under respective Items.
M&L for repairs the any type leakage from joint,bend, socket, reducer and Tee in 50 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. Note:Excavation, returning filling and removal of soil will be measured and paid under respective Items.
M&L for repairs the any type leakage from joint,bend, socket, reducer and Tee in 80 mm dia GI pipe under trench by excavation and providing the new material like nipple , tee, Socket etc as per requirement complete all as specified and directed by Engr-in-Charge. Note: Excavation, returning filling and removal of soil will be measured and paid under respective Items.
M&L Cutting of existing cast iron/DI pipes of size 250 mm bore in any position for insertion and fitting of new Tee, Coller, Tail pieces etc for taking out connections, branch connections complete all as specified and directed by Eng-in-charge. Note :- (a) Excavation/earth work shall be measured and paid seperately under respective item of schedule. (b) Cast iron fittings shall be measured and paid seperately as supply only under respective item of the schedule
All as per Item No.58 above,but of size 150 mm bore
All as per Item No.58 above,but of size 100 mm bore
Supply, laying, jointing and testing of Ductile iron water mains of size 80mm bore, Class K-7 with spigot and socket ends including rubber gasket joints laid in trenches complete all as specified and directed by Eng-in-charge.
Supply, fixing and testing DI fittings for spigot & socketed or flanged pipes i.e. bends, reducers, tail pieces, tapers, tees, collars, caps, plugs with MS plate, nuts, bolts, washers gaskets etc of sizes 80 mm to 200 mm dia including taking out unserviceable fittings complete all as specified and directed.
M & L for taking out sluice valve, refacing, remetaling,regrinding and refixing of 250 mm bore complete all as specified and directed by Eng-in-charge.
All as per Item No.63 above,but of size 150mm bore
All as per Item No.63 above,but of size 100 mm bore.
M&L for boring drilling, threading and tapping on existing cast iron mains for size 80 mm to 300 mm bore for connecting 15/20/25/40/50/80 mm bore pipe by fixing on clamp made out of MS flat iron of size 40 x 3 mm made to required shape & size with GI socket duly welded, nut & bolts etc. complete all as specified and directed.
Supply only Ferric Alum crystal as per IS : 299 (Q3)grade 1 in solid form packing material should be of Poluthene lined HDPE Bags and packing size of 50 Kgs complete all as directed by Eng-in-charge.
Supply only Polyaluminium chloride as per IS : 15573 packing material should be of Polythene lined HDPE Bags complete all as directed by Eng-in-charge.
Supply only Ferric Alum brick as per IS : 299 (Q3)suitable for drinking water purification complete all as directed by Eng-in-charge.
Supply only soda ash lime suitable for drinking water purification complete all as directed by Eng-in-charge.
Supply only chemical for drinking water treatment , calcium based granular high strength disinfectant chlorinating chemical having 65 % to 70 % chlorine content in granular form in a 45 kg drum complete all as directed by Eng-in-charge. Note: (i) The Chemical should be of new batch number not more than 6 month old manufactured. (ii) Make/Brand shall be from any manufacturer aproved by E-in-c's branch.
Collection water sample in clean bottle from location as directed for testing of physical test, chemical test, as per IS-10500-1991 from NEIST JORHAT or any government recognized institute and submitting test report complete. Note : Test will be conducted at the interval of 3 month)
MAA COMMUNICATION
RIA CONSTRUCTION
M/S S. P. ENTERPRISE
M/s PRABIR ENTERPRISE
ms singh construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .