REPAIR AND MAINT OF GI/CI/DI PIPE LINE, INTERNAL WIRING E/M FITTINGS, FIXTURES, STREET LIGHT FITTINGS AND ASSOCIATED WORKS OF ASCON NODES (SANU, GAMMNEWALA, RANNAUTAR) RESTRICTED AREA AND GIRDHAR LAND UNDER THE JURISDICTION OF GE (A) JAISALMER

Amount

Taking up or down carefully steel water tubing and connection from any place including cleaning for refixing or to be issued as Sch of Credit of following sizes:-

(a) 20 mm bore.

(b) 25 mm bore.

(d) 50 mm bore.

(e) 80 mm bore.

Refixing of old steel water tubing and connections in new or old position (wall/floor/ceilling/trecheh etc) of following sizes:-

(a) 20 mm bore.

(b) 25 mm bore.

(d) 50 mm bore.

(e) 80 mm bore.

Supply and fix complete to walls / ceilings or laid in floors/trenches steel water tubing galvanised medium grade with all fittings of following sizes:-

(a) 20 mm bore.

(b) 25 mm bore.

(d) 50 mm bore.

(e) 80 mm bore.

M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of following sizes complete all as specified & directed by Engr-in-Charge.

(a) 20 mm bore.

(b) 25 mm bore.

(d) 50 mm bore.

(e) 80 mm bore.

S&F in repairs gun metel,globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the follwing sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer-in-Charge.

(a) 20 mm bore.

(b) 25 mm bore.

(d) 50 mm bore.

(e) 80 mm bore.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc not exceeding 10 sqm on plan and getting out in Soft/dis integrated rock complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified & directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers of rock not exceeding 25cm complete all as specified & directed by Engineer-in-Charge.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of soil complete all as specified & directed by Engineer-in-Charge.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of rock complete all as specified & directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation concrete, mass concrete etc. complete all as specified & directed by Engineer-in-Charge.

S & F in repairs foot valve cast iron assembly of following sizes:-

(a) 50 mm bore.

Supply and fix in replacement rotational moulded polyethylene water storage tanks (vertical cylindrcal with closed top ) double layered with ISI marked with existing inlt ,outlets & provision of washouts (vent pipe all as directed of capacity) 500 litre including float valve complete as specified and directed by Engr-in-charge.

Supply and fix in replacement rotational moulded polyethylene water storage tanks (vertical cylindrcal with closed top ) double layered with ISI marked with existing inlt ,outlets & provision of washouts (vent pipe all as directed of capacity) 1000 litre including float valve complete as specified and directed by Engr-in-charge.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground levl connected to galvanized iron strip 25 x 3 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed. (NOTE:-GI earth strip and protection pipe beyond 7.5m will be measured and paid separately)

M&L for main earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situation for loop earthing etc of galvanised strip 25x3 mm.

M&L dewatering, cleaning of UG sumps (by professional agency like Narmada water tank cleaners or equivalent) with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacum cleaners and disposal of the same to a safe distance including scrubing of internal surface by steel wire brush, removing the dirt completely using industrial vaccum cleaners and sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder including repair to vent pipes and providing wire mesh and clamps (to stop ingress of pigeons) complete and marking the date of cleaning by using synthetic enamel paint in white colour over black background and letters of height 40 mm height and 30 mm width complete all as directed including one coat of white wash on the internal surface complete all as specified and directed by Engineer-in-charge. Note: If the work is not done upto satisfaction level of concerned JE/AGE (E/M), the work will be redone upto required level without any extra cost. Neccessary tools and safety gears to be arranged by contractor without any extra cost. Labours safety shall be contractors responsiblity.

(a) 10000 Gallons

Supply and fix in repairs motor cooling fan of same size as existing suitable for motor incl all fiiting,fixtures,etc as directed by Engr-in-charge as following : -

Supply and fix in repairs front ends bearing of same size as existing suitable for motor incl all fiiting,fixtures,etc (incl taking out motor if not in repair) as directed by Engr-in-charge as following : -

Supply and fix in repairs rear ends bearing of same size as existing suitable for motor incl all fitting and fixtures ((incl taking out motor if not in repair) as directed by Engr-in-charge as following : -

Taking down mono block pump set, dismantling and taking out burnout copper winding wires after opening the motor (i.e machining,work, welding, grinding, turning & polishing, lathe work, filler work etc.) & cutting & cleaning complete with proper cleaning solution and rewinding the motor with appropriate gauge & best quality copper enamelled wire with packing material, varnishing complete and testing & commissioning for following capacity complete all as directed by Engr-in-charge. (Note :- The other spare parts will be measured and paid separately under relevent items of Sch 'A' as supply only).

Supply only against Item No 12 above the following spares parts suitable for 03 HP Pump Set 3 Phase. capacity monoblock centrifugal pump sets models complete all as directed by Engr-in-charge.

CI Impeller

Impeller nut GM

key for Impeller MS

Front bearing

CI front inner cap.

CI rear inner cap.

Rear bearing

CI rear outer cap.

Terminal board bakelite

Shaft

Taking down carefully old copper/ Aluminium point wiring , fitting and fixtures complete such as switches,ceiling rose, pendenent, regulators, sockets etc , removing unserviceable materials from site and making good disturbed surface etc complete as per arrounding complete all as specified & directed by Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes complete all as specified & directed by Engineer-in-Charge.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified & directed by Engineer-in-Charge.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC Cassing Capping and accessories etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FR LS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan point controlled by one switch 5 Amp one way

(b) -Ditto- all as per item no.29 but socket outlet 3 pin 5 amps same board

(c) -Ditto- all as per item no.29 but socket outlet 3 pin 5 amps Independent board

-Ditto- all as per item No 29 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 1.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

S&F for Switch piano flush type single pole one way, and 6 amp complete ISI mark complete all as specified.

S&F for Socket outlet multipurpose having provision for 2 in 1, 3 pin 5 amp piano flush type complete complete all as specified.

S & F for Switch piano flush type single pole one way, and 15 amp complete ISI marked complete all as specified.

S&F for socket outlet 2 in 1, 2/3 pin 5 Amps and 15 Amps flush type complete all as specified.

S & F in repair of modular type 1 way 6 Amp complete all as specified.

S & F in repair of socket ,6 A - 2/3 pin combined 2 modue complete all as specified.

S & F in repair of modular switch 1 Way 16 A,1 module complete all as specified.

S & F in repair of socket 6A/16A - 2/3 pin combined 2 module complete all as specified.

S & F ceiling rose 65 x50 mm three terminal 230 volt Make : ANCHOR

S& F lamp holder , PVC /Polycarbonated type with back plate suitable for batten fitting all as specified and directed.

S&F in repair MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 12 way double door type complete all as specified.

S&F in repair MCB DBs sheet metal enclosure single pole and neutral 240 Volt with 200 Amps rated bus bar 8 way double door type complete all as specified.

Supply and fixing MCB's SPN 40 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified. Make : Legrand, C&S, Indo Asian

Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified. Make : Legrand, C&S, Indo Asian

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete with two coat of black bituminus painting of old steel conduit with enamel paint of superior quality after scratching of old paint with sand paper complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable and one run of conduit pipe shall be paid as one unit length)

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation 10/12 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make:- Orient, Philips, Crompton, Havells etc

S & F in repair bracket of GI pipe medium grade of 40 mm dia,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers, painting complete all as specified.

Taking down ceiling fan / Exhaust fan of any sweep sealing cable end dismanting blade and removing fan and blade to store complete all as specified and as directed.

M & L for Painting of ceiling fan/ Exhaust fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler one coat after cleaning all dust etc complete all as specified and as directed.

Fixing only ceiling / exhaust fan after serviceing greasing change of bearing if reqd, including making serviceable and noise free in all respect and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.

Taking down storage type water heater from wall by disconnecting the electric connection and water inlet/outlet connection from main and repairing the water heater storage type capacity 25/50 ltrs of any type and make, in MES store Yard complete all as specified.

Refixing storage type water heater, checking the serviceablity of all parts such as inner vesser, rubber gasket, non return valve, heating element, thermostat etc and refixing the same after replacing of unserviceable parts and assembly completet (considered as one unit) and installing and testing the same as per the direction of Engineer-In-Charge.(Supply only for parts against unserviceable parts shall be measured and paid for separately under relavent items given below)

Supply & fix in repair Sheet metal earth plug, socket with top, single pole and neutral with single pole MCB 20 Amps 240 volts fixed in repairs complete. Make :- HAVELL's / Legrand/ IndoAsian .

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj Cat part No BGCL 40 W LED WH or its equavalent in Philips, Wipro.

Note :- The location for execution of work will be Escon Nodes at Danwar, Sangarh, Mohangarh and Dabla area, Rates to be quoted by the contractors considering the distance locations.

Taking up/down of old unserviceable cable of size 16 Sqmm 4 Core complete all as specified & directed.

Dismantling & taking down Street light fittings including brackets etc. complete all as specified & directed.

Dismantling the existing LT Panel size/type complete all as specified & directed.

Taking up/down of old unserviceable copper wire of size 2.5 Sqmm Two Single core complete all as specified & directed.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge. (Note :- For the purpose of payment only punned thickness will be measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

Labour only for checking the serviceability of different spares / components / parts of security light fittings (LED/HPSV, HPMV, Metal Halide fittings etc, any wattage/capacity) of any description and in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, cleaning acrylic/glass cover connecting to electric supply and its testing on installation etc complete all as specified and directed by Engineer-in-Charge.

Supply only bipin holder suitable for security light fitting 4x14, 4x24 Watt complete all as specified & directed by Engineer-in-charge.

Supply only tube rod T5, 14 watt, single rod suitable for security light fitting 4x14 watt complete all as specified & directed by Engineer-in-charge. (Make :- Crompton Greaves Cat Part No. T514W 6500K/4000K/2700K ).

Supply only tube rod T5, 24 watt, single rod suitable for security light fitting 4x24 watt complete all as specified & directed by Engineer-in-charge. (Make :- Crompton Greaves Cat Part No. T524W 6500K)

Supply only electronic ballast, T-5, 2x14 watt, 240 volts suitable for security light 4x14 watts complete all as specified and directed by Engineer-in-Charge. (Make :-Crompton Greaves Cat Part No EBN 214T5-A or.

Supply only electronic ballast, T-5, 2x24 watt, 240 voltssuitable for security light 4x24 watts complete all as specified and directed by Engineer-in-Charge. (Make :-Crompton Greaves Cat Part No EB224T5-B/I.

Supply only electronic ballast for 28 watt, 240 Volts flourescent tube light fitting complete all as specified & directed by Engineer-in-charge. (Make :- Crompton Greaves Cat Part No. EBN 128 T5-A/S).

Disconnecting and taking out existing MS boxes of any description and in any position on poles or fixed in the plinth of poles and supplying and fixing in position new PVC (Sinthetic ) boxes of size 270 mm X 225mm X 135mm depth, made out with Sinthetic. The box shall be provided with and including 10 cm long aluminium bus bar of size 20x3 mm size 2 Nos mounted on porcelain insulators including one No. MCB SP of ‘C’ series, 5/6 Amps of Make Legrand/L&T/ Siemens and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5 mm FI clamps, nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge.Make :- Sintex Note :- The contractors quoted rates for the above items are deemed to include for fixing the Sinthetic box in position with suitable MS clamps and/or necessary PCC as per site requirement.

S&F in repair, cable 2.5 sqmm two core, copper multistrand, PVC insulated, unsheathed, 1100 volts grade complete all as specified and directed by Engineer-in-charge.

S&F in repair, MCB single pole 6 to 40 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.Make :-Havells Cat No. DHMGCSPF006-040 or equivalent makes mentioned in Appx 'C'.

supply and laying ,testing XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade for the 16 Sqmm 4 Core cross sectional area all as specified and directed by Engineer-in-Charge.

M&L for bore earthing not less than 250mm dia 16 feet deep filled with black soil upto 7 feet from bottom complete with galvanised iron pipe 40mm bore medium grade 3m long tapers at bottom & provided 12mm holes (staggered) at 75mm centre to centre upto 2.5m of length from bottom, burried directly in ground filled with 45cm alternate layer of magnisium sulphate, charcol & salt up to ground level & connected to galvanised iron strip 32x6mm above ground level as earthing lead by means of bolt and nut, check nuts and washers of galvanised iron or steel including brazing work upto equipment and 40mm dia light grade GI pipe for earth lead protection and testing on completion complete including taking out old earthing all as specified & directed by Engineer-in-charge.

S&F integral LED street light luminaire comprising of epoxy powder coated housing, enclosed with glass cover in frame of capacity 45 watt mounted on MCPCB including taking down existing street light fittings & make electrical connection with 3 single core of 2.5 Sqmm aluminium cable from overhead line/junction box to street light fitting complete all as specified and directed by Engineer-in-charge. (Make:- Crompton Greaves Cat Part No.LSTP-45-CDL ).

S&F in repair, galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings all as directed by Engineer-in-charge.

Supply only the of LED fittings :- (a) Driver 45/48W Make- CG/Havells/Bajaj.

Supply, installation testing and commisioning LT Panel 415 volt for wire AC 50 Hz factory made, CPRI Approved floor mounted,indoor type panel made out of MS sheet of size 3.15 mm thick of size suitable size for fixing of MCCB, Aluminum bus bar with having separetely locking arrangements duly with powder coated and mounted on an angle iron frame, 40 cm hright above ground level duly fixed with PCC etc, including contol wiring complete to accomodate including the following accesories:

Siddharth Constructions

S R ENTERPRISES

M/s Shri Inder Construction Company

M/S RAKESH CHOUDHARY

S.O.S.CONSTRUCTION CO.