Repair to PWD Sub Division office building at Ramshehar (SHRepair of door, window , Distempering and flooring etc

Amount

Dismantlingdoors,windowsandclerestorywindows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15?3 mm lugs 10 cm long embedded in cement concrete block 15?10?10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-incharge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15?3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. 300x16 mm, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm. including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-incharge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and laying Ceramic glazed floor tiles of size 300?300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc ., complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing 12 mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Prelaminated particle board with decorative lamination on one side and balancing lamination on other side including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in charge With cement mortar 1:4 (1 cement : 4 fine sand), including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-incharge.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter, including carriage of materials within all leads and lifts and per the entire satisfaction of Engineer-in-charge.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter, including carriage of materials within all leads and lifts and per the entire satisfaction of Engineer-in-charge.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600?450 mm internal dimensions, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, ncluding applying additional coats wherever required to achieve even shade and colour. Two coat, including carriage of materials within all leads and lifts and other incidentals and s per the entire satisfaction of Engineer-in-charge.

roviding and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls tc. concealed pipe, including painting with anti corrosive bit mastic paint, cutting chases and aking good the wall : 15mm dia nominal bore, including carriage of materials within all and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineerin-charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-incharge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing soil, waste and vent pipes : 100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10?10?10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing plain bend of required degree 100 mm dia Sand cast iron S&S as per IS 1729, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc ., complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

Providing and fixing 600x450 mm be levelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials within all leads and lifts and other incidentals and as per the entire satisfaction of Engineer-in-charge.

nitin govt. contractor

Chandan Sharma

RAJEEV KUMAR

JITENDER KUMAR