REPAIR PAINTING AND POLISHING OF TRESTLES STORE ROOM SOFA RACKS AND OTHER STEEL AND WOODEN FURNITURE AT PMS

Amount

STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-1043 Trestle Store Room Steel

Necessary welding wherever required, restoe the frame in its original position and making the same in functional complete all as per drg

FD-1038 Rack Steel 6 Tier (closed type)

Back to rack steel (closed type) made of MS Sheet of 1 mm thick of eixsting shape and size and making functional

Side made of 1 mm thick MS Sheet as per drg & making functional

Shelve made of 1 mm thick MS Sheet as per drg & making functional

MS angle iron to rack steel closed type as per drg & making functional

FD-165(M) Table dining ORs

Top made out of 18/19mm thick plain particle board exterior grade covered with with aluminium sheet 20 gauge, on top and alaaround as shown on drawing.

Long rail of size : 25mm x 25mm MS tube, 1.6mm thick, 1575mm long

Leg made out of 25mm x 25mm x MS tube 1.6mm wall thickness

Stiffener bottom made out of 25mm x 25mm, MS tube of 1.6mm wall thickness.

Stiffener top made out of 25mm x 25mm, MS tube of 1.6mm wall thickness

PVC Shoe

FD-75(M) Chair CB Steel With Arm

Seat frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

Back frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

Handle made out of H.W(T.W) well seasoned of exisiting size and shape with required screw after finish with black polish.

FD-75(M) Chair CB Steel Without Arm

Seat frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

Back frame of existing size made out of 1st class teak wood duly -caning with new HDPE plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screws

FD-1004 Table office clerk steel

Top made out of 18/19mm thick prelaminated particle board one side teak veneered and other side balancing white with 19x4mm teak wood beading duly french polished all around the top.

Internal locks 40mm 4 lever with duplicate keys of approved quality.

Drawer of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.

PVC shoe

FD-1003 Table office officer steel

Top made out of 18/19mm thick prelaminated particle board one side teak veneered and other side balancing white with 19x4mm teak wood beading duly french polished all around the top.

Internal locks 40mm 4 lever with duplicate keys of approved quality.

Drawer of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.

PVC shoe

FD- 1023 Side rack w/3 tray steel

Nesessary denting & welding wherever required making the frame in its original position and making functionel all as per drg

MS angle iron to side rack as per drg & making functional

Shelves made of 1 mm thick MS Sheet as per drg & making functional

FD-1031 Almirah Steel large W/Sh

Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding

Handle chromium plated heavy duty

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved

3 way locking device as per drg.

Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

Shelf of existing size and shape made out of MS sheet 1.00mm thick

STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-1032 Almirah Steel medium W/Sh

Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding

Handle chromium plated heavy duty

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved

3 way locking device as per drg.

Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

Shelf of existing size and shape made out of MS sheet 1.00mm thick

FD/E6/MAP/12 / Sketch 'PP' /C Chair Visitor

Back frame with Dimensions as shown on drngs. shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra comfort with PVC lapping all arounds complete all as specified and directed.

Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete

Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant

Necessary denting ,welding & scrapping wherever required making the frame in its original position and making functionel all as per drg

FD-1008 Table 900 x 600 x 760 mm Steel W/Drawer

top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top

Internal locks 40mm 4 lever with duplicate keys of approved quality.

Drawer of existing size and shape made out of MS sheet 1.00mm thick

Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.

PVC shoe

FD-1039 Rack Steel 3 Tier

Back to rack steel (closed type) made of MS Sheet of 1 mm thick of eixsting shape and size and making functional

Side made of 1 mm thick MS Sheet as per drg & making functional

Shelve made of 1 mm thick MS Sheet as per drg & making functional

MS angle iron to rack steel closed type as per drg & making functional

WOODEN FURNITURE Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-281 Sofa set 2 Seater

Front legs made out of Teak wood well seasoned in existing shape and size

Rear legs made out of Teak wood well seasoned in existing shape and size

Front rail made out of Teak wood well seasoned in existing shape and size

Back rail made out of Teak wood well seasoned in existing shape and size

Arm rest made out of Teak wood well seasoned in existing shape and size

Back wooden bearers made out of Teak wood well seasoned in existing shape and size

Bottom wooden bearers made out of Teak wood well seasoned in existing shape and size

Cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.

FD-281 Sofa single seater

Front legs made out of Teak wood well seasoned in existing shape and size

Rear legs made out of Teak wood well seasoned in existing shape and size

Front rail made out of Teak wood well seasoned in existing shape and size

Back rail made out of Teak wood well seasoned in existing shape and size

Arm rest made out of Teak wood well seasoned in existing shape and size

Back wooden bearers made out of Teak wood well seasoned in existing shape and size

Bottom wooden bearers made out of Teak wood well seasoned in existing shape and size

Cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.

FD/MAP/II/05 Chair Dinning

PVC seat 4mm thick existing size in its original position all as shown on drg

Front legs made out of Teak wood well seasoned in existing shape and size

Rear legs made out of Teak wood well seasoned in existing shape and size

Front rail of seat frame made out of Teak wood well seasoned in existing shape and size

Side rail of seat frame made out of Teak wood well seasoned in existing shape and size

Back rail made out of Teak wood well seasoned in existing shape and size

Short stiffener made out of Teak wood well seasoned in existing shape and size

Back rest batten made out of Teak wood well seasoned in existing shape and size

PVC Shoe

FD-99(M) Board Notice 1200x900

Door glass of 4 mm thick of existing shape and size and making functional

Door shutter 2 way of existing shape and size and making functional

Baize green cloth of existing shape and size and making functional

Soft wood board 19 mm thick of existing shape and size and making functional

Wooden frame made of hard seasoned teak wood of existing shape and size and making functional

FD/MAP/II/04 Repair of Chair Dinning

12mm ply seat of existing size in its original position all as shown on drg

Front legs made out of Teak wood well seasoned in existing shape and size

Rear legs made out of Teak wood well seasoned in existing shape and size

Front rail of seat frame made out of Teak wood well seasoned in existing shape and size

Side rail of seat frame made out of Teak wood well seasoned in existing shape and size

Back rail made out of Teak wood well seasoned in existing shape and size

Short stiffener made out of Teak wood well seasoned in existing shape and size

75mm thick 32 density cushion and covered with new tapestry cloth duly stitched.

Back rest batten

PVC Shoe

FD-95/293 Table 600x600x760mm

Top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top

Legs (size 760x35x35mm) made out of Teak wood well seasoned in existing shape and size

Front rails (size 25x50mm) made out of Teak wood well seasoned in existing shape and size

Side rails (size 25x50mm) made out of Teak wood well seasoned in existing shape and size

PVC Shoe

FD/MAP-II/03 Table dining 8 Pers (MAP )

Top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top.

Legs of size 750x45x90mm made out of 1st class well seasoned teakwood

long rail of size 1800 x 45 x 90 mm made out of 1st class well seasoned teakwood complete all as directed and shown on drg.

Short top rail of size 900 X 45 X 90 MM .made out of 1st class well seasoned teakwood complete all as directed and shown on drg.

MS Right angle of size 150 x 30 x 5 mm with mild steel screws complete all as directed & shown on drg.

PVC Shoe

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

FD-1043 Trestle Store Room Steel

FD-1038 Rack Steel 6 Tier (closed type)

FD-165(M) Table dining ORs

FD-75(M) Chair CB Steel With Arm

FD-75(M) Chair CB Steel Without Arm

FD-1004 Table office clerk steel

FD-1003 Table office officer steel

FD- 1023 Side rack w/3 tray steel

FD-1031 Almirah Steel large W/Sh

FD-1032 Almirah Steel medium W/Sh

FD/E6/MAP/12 / Sketch 'PP' /C Chair Visitor

FD-1008 Table 900 x 600 x 760 mm Steel W/Drawer

FD-1039 Rack Steel 3 Tier

Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-

FD-281 Sofa set 2 Seater

FD-281 Sofa single seater

FD/MAP/II/05 Chair Dinning

FD-99(M) Board Notice 1200x900

FD/MAP/II/04 Repair of Chair Dinning

FD-95/293 Table 600x600x760mm

FD/MAP-II/03 Table dining 8 Pers (MAP )

BISWAS ENTERPRISE (BID ID -3244694)

ANSH CONSTRUCTION (BID ID -3244678)

Jaibalaji Enterprise (BID ID -3244656)

UNIQUE ENTERPRISE (BID ID -3244641)