Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC | ₹28.3 L | L1 | Accepted-AOC Accepted due to being lowest rate. |
| 2 | L2₹34.1 LRejected-Finance AMLA | ₹34.1 L | L2 | Rejected-Finance Rate quoted amount more than L1. |
| 3 | L3₹34.2 LRejected-Finance | ₹34.2 L | L3 | Rejected-Finance Rate quoted amount more than L1. |
| 4 | L4₹34.4 LRejected-Finance | ₹34.4 L | L4 | Rejected-Finance Rate quoted amount more than L1. |
| 5 | L5₹35.1 LRejected-Finance N A | NA | NA | 121004 | ₹35.1 L | L5 | Rejected-Finance Rate quoted amount more than L1. |
Tender Value
₹46.1 L
EMD Value
₹50,000
Closing Date
17 Feb 2026, 5:30 pmClosed
Executive Engineer, New Bhopal Division P.W.D. BPL
O/o The Executive Engineer, New Bhopal Division P.W.D., Shed No.10 Jawahar Chowk, T.T.Nagar, Bhopal
Various Repair work M.P. Bhoj Open University campus Bhopal under M-2 Sub Dn, PWD Bhopal
2026_PWDRB_479193_1
39/2025-26/SAC/New Bhopal Dt 30-01-2026
Open Tender
Civil Works - Buildings
180 days
Bhopal
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹50,000
18 Jun 2026
3 Feb 2026
19 Feb 2026
3 Feb 2026
17 Feb 2026
3 Feb 2026
Various Repair work M.P. Bhoj Open University campus Bhopal under M-2 Sub Dn, PWD Bhopal
Please Enable Macros to View BoQ information
Bill of Quantities (BOQ)
Probable Amount of contract :
(Rs. in Figures) : Rs. 46.12 Lacs
(Rs in words) : Rupees
Time Alloved : 06 months
Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.
With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm)
Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm.
With 20mm nominal size graded stone aggregate.
M-15 – Grade concrete
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)
Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 D or more conforming to IS 1786
Foundations, footings, bases of columns, etc. for concrete upto plinth level
excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
M-20 Grade Concrete
Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge.
Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings,frames, guard bar, ladder,railings, brackets,gates and similar works.
Supplying at site:
Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately).
Concealed work including cutting chases and making good the walls etc.
20 mm nominal outer dia .Pipes.
Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete
Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge:
Fixing with adjustable lugs with split end tail to each jamb.
Marine plywood conforming to IS: 710
1.0 mm thick.
30 mm thick WPC (Wood polymer composite) solid plain flush door shutter
Providing and fixing ISI marked stainless steel door latches with screws etc. complete :
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete:
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) :
Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm)
75 mm diameter
110 mm diameter
Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
Coupler
75 mm bend
110 mm bend
Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore.
Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range)
Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range)
Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification.
100 mm dia.
Providing and fixing in position best Indian Health Faucet with 8mm dia 1 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware)
Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range)
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity
White
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
W.C. pan with ISI marked white solid plastic seat and lid.
10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.
110 mm diameter OD (min. wall thickness 3.2mm)
160 mm diameter OD (min. wall thickness 4.0mm)
110 mm diameter PVC. pipe
160 mm diameter PVC. pipe
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With well burnt bricks
Supplying and fixing C.I. cover without frame for manholes :
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.
100x100 mm size P type
With well burnt bricks
Total
Sub Engineer Sub Divisional Officer Executive Engineer Sec. P.W.D. M-2 Sub Dn. P.W.D. New Bhopal Division Bhopal Bhopal.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
Tender.pdf
Tender Documents • 10.18 MB
BOQ_564102.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid