Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.9 L+₹3.5 L (10.2%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹39.2 L+₹4.8 L (14.0%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹39.8 L+₹5.4 L (15.8%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹40.3 L+₹5.9 L (17.2%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹44.1 L
EMD Value
₹88,200
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) B/R CHAKERI
GE (AF) B/R CHAKERI, KANPUR
PROVN OF NEW TOILET FOR SNCOS BILLET AT AFS CHAKERI KANPUR
2023_MES_584236_2
GE(AF)/CHK/T-65 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
CHAKERI KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) B/R CHAKERI
₹88,200
Yes
18 Jul 2023
28 Apr 2023
27 May 2023
28 Apr 2023
20 May 2023
8 May 2023
Amount
Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.
M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for brick work with flyash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M & L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.
M & L for RCC M-25 Design Mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for RCC M-25 Design Mix as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.
M & L for RCC M-25 Design Mix as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for RCC M-25 design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M and L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished flat surfaces complete all as specified and as directed.
M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish surfaces complete all as specified and as directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide , horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces of concrete complete all as specified and as directed.
M & L for mild steel TMT bars 10 mm dia & over cut to length bent to shape required including,crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Ditto all as per item No 13.00 above but 6mm to 8mm dia.
Ditto all as per item No 13.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
Filling under floor incl spreading and levelling, watering and well ramming in layers n exc 25 cm thick with excavated material complete all as specified and as directed.
M&L for 100 mm thick cement concrete 1:4:8, type D- 2, ( using 40mm graded aggregate) as in sub base of floor complete all as specified and directed.
M & L for precast cement concrete 1:2:4 type B-0 as in louveres and jallies, 25mm thick set in CM 1:4 (measured solid), including all mould- ings but excluding frame complete all as specified and directed.
S & F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
S & F sheet glass 3 mm thick frosted on one side ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M & L for pressed steel frame using 1.25 mm thick cold rolled mild steel sheet (size of frame 125 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate etc and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified and directed.
S & F Solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as pe specification & drawing
S & F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 5 mm thick on fair faces of concrete surfaces as in ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.
M & L for Non-skid Ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450 x 350x 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.
M & L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for 75 mm thick cement concrete 1:3:6 type C- 2, ( using 40mm graded aggregate) as in plinth protection complete all as specified and directed.
M & L for preparing new plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M & L for preparing new plastered surface and applying three coats of white wash on ceilling complete all as specified and directed.
M & L for preparing new plastered surface and applying two coats of cement base paint over and including a coat of cement primer complete all as specified and directed.
M & L for two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and directed.
S & F GI steel water tubing 15mm bore medium grade with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Ditto all as per item No 38.00 above for but 20 mm dia pipe.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves etc. and cutting chases for concealed water tubing and making good, cutting not exceeding 10cm girth complete all as specified and directed.
S&F vitreous China wash basin oval shape, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
M & L for Granite Stone (in black shade) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.(Note necessary drilling holes for housing WHB and pipes including moulding shall be deemed to be included in quoted rates by the contractor)
S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms) complete all as specified and directed.
S&F 15mm dia 450 mm long PVC connection including 02 Nos union on both ends screwed for iron pipes complete all as specified and directed.
S&F bib taps 15mm bore, cast copper alloy, chromium plated , fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F 15 mm dia stop valve / angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S & F brass chromium plated shower rose 125 mm size complete all as specified and directed.
S&F 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S & F vitreous china urinal partition white of size 310x700 mm including all necessary fittings and fixtures complete all as specified and directed.
S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
S & F centrifugally cast hubless Cast iron soil ,waste and vent pipe 100 mm dia in any length fixed in trenches with joint as per manufacturer's instruction complete all as specified and directed.
S & F centrifugally cast hubless Cast iron soil ,waste and vent pipe 50 mm dia in any length fixed to walls with joint as per manufacturer's instruction complete all as specified and directed.
S & F centrifugally cast hubless Cast iron soil, waste and vent pipes 75 mm dia in any length with joint as per manufacturer's instruction , laid in trenches floors or in wall complete all as specified and directed.
M & L for cast iron floor trap 75 mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F CI bends 100 mm bore (any radius), fitted with oval access doors diminishing pieces or tapers complete all as specified and directed.
S & F 50 mm bore cast iron cowl complete all as specified and as directed.
S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white with integral foot rests including 100 mm bore cast iron P trap (excluding flushing cistern and flush pipe) set in and including concrete complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover, white or in matching colour , closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F cromium plated health faucet with 1m long hose pipe ( including all neccerary fittings) complete all as specified and directed.
S & F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC Flush pipe complete all as specified and directed.
S & F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S & F ball valves for 20mm dia pipe, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight- 210 gms ) complete all as specified and directed.
S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified and directed.
Removing excavated material n exc 50 m and depositing where directed at al level n. exc 1.50 m above the starting point complete all as specified and directed.
Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed.
M & L for Cement Concrete Type B 2 1:2:4 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M & L for Steel work in tubular section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L for flat iron for securing roof sheet (or securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and avg 15 cm and getting out in soft/loose soil complete all as specified and directed.
S & F of 100 mm long stainless steel butt hinges, complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:4:8, type D- 2, ( using 40mm graded aggregate) as in sub base of floor complete all as specified and directed.
M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in flooring complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius in cement mortar 1:4 complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on other than fair faces of brick or concrete surface and finished the surface even and smooth without using of extra cement complete all as specified and directed by Engr-in-Charge.
M&L for providing concrete bed to drain pipes including packing under and haunching against the side of pipes with cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) after they are laid and tested for 150mm bore pipe complete all as specified and as directed.
M&L reinforced cement concrete pipes 150 mm bore, class NP3, laid and jointed complete with collars complete all as specified and as directed.
M&L for providing reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in precast manhole covers complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed.
Cutting into existing manholes for connecting new drains , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and as directed.
Dismantling water tanks of capacity 250 to 500 ltr and removing to store complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Taking down chowkat with shutter (without taking off shutter from frame) n exc 1.5 sqm each complete all as specified and as directed.
Taking down steel water tubing of 15 mm dia bore incl connection complete all as specified and as directed.
Taking down steel water tubing of 20 mm dia bore incl connection complete all as specified and as directed.
M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly suitable for mounting switches/socket including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for one light, fan, call bell point controlled by one switch. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
-Ditto- all as per item No 96 here-in-before but For one socket point controlled by one switch on independent board. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
-Ditto- all as per item No 96 here-in-before but For one socket point controlled by one switch on same board. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
All as per item No 96 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead. Make of Wire : Polycab/Havells/Finolex. Make of conduit : Plaza/Kalinga/AKG
S&F switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and as directed. Make : Cona/Havells/Anchor
S&F switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified and as directed. Make : Cona/Havells/Anchor
S&F socket outlet 5 pin, 5 Amps flush type white finish complete all as specified and as directed. Make : Cona/Havells/Anchor
S&F socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified and as directed. Make : Cona/Havells/Anchor
S&F ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and as directed. Make : Cona/Havells/Anchor
S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed. Make : Legrand/Schiender/ABB
Supply & fixing, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified & directed.Make : Legrand /Schiender / ABB
-Ditto- all as per item No 106 but of SPN 32 Amps. Make : Legrand /Schiender/ABB
Supply and fixing heavy duty exhaust fan metal body of 300mm sweep including making necessary electrical connection complete all as specified and as directed . Make: Crompton/Havells/Bajaj
Material and Labour for making circular holes suitable for fixing of 12” sweep Exhaust fans by cutting the wall any thickness/ required circumstances for exhaust of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete all as specified and directed.
M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly complete. Make of wire: Polycab/Havells / Finolex . Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.
S&F rigid non metallic white / ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position on wall and surface on roof/ceiling inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc all as directed by Engineer-in-Charge. Make : Plaza/Kalinga/AKG
M & L energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection with three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser. Make : Philips Cat No : BN 021 LED 20S 6500 PSU GR S1 or equivalent in Wipro / Havells.
M & L energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection with three core copper cable from ceiling rose to light fitting and removing UNSV bracket with sketch fitting all all as directed. Make : Philips Cat No BN 021 LED10S - 6500 PSU GR S1 or equivalent in Wipro / Havells.
S&F Endural LED bulk head fitting Plastic Body, heat resistant, with specially designed gasket all as directed by Engr- in - charge. Make : Philips Cat pat- WT140W LED7S NW PSU S1 PC or equivalent in Wipro / Havells.
Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth strip of 32x6mm (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shwon in electrical plate no 5 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS bar 8mm dia 150mm c/c reingorcement, watering funnel 40mm dia light grade for protection of earth electrode 20mm dia for watering all as speicified and directed and tested on completion.
M&L for cutting of PCC/Hard standing/WBM road for passing of GI/CI/DI pipes all as specified and directed . Note : Making good with PCC shall be measured and paid separetely under respective item.
M&L for cement concrete 1:2:4 Type B 1 using 20 mm graded stone aggregate complete all as specified and as directed by Engineer- in -Charge.
M&L for PCC 1:2:4 Type B2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engineer- in -Charge.
M&L for drilling manually in soft / loose soil under road / hard standing / culvert / nala of suitable bore for protection pipe upto 200 mm bore complete all as specified and as directed by Engineer in Charge. Note: Depth of bore shall not be more than 1 Mtr from original ground level complete all as specified and as directed.
M & L for GI pipe medium grade with all necessary fittings laid in trenches / floor of size 15 mm bore complete all as specified and as directed
All as per item No. 120 above but size 20 mm bore
All as per item No. 120 above but size 25 mm bore
All as per item No. 120 above but size 40 mm bore
All as per item No. 120 above but size 50 mm bore
Supply & fixing in replacement of Gun metal Gate valve with Iron wheel, head screwed both ends for Galvanised Iron pipe for sizes 15 mm bore complete all as specified and as directed.
All as per item No. 125 above but size 20 mm bore
All as per item No. 125 above but size 25 mm bore
All as per item No. 125 above but size 40 mm bore
All as per item No. 125 above but size 50 mm bore
M & L for construction of valve chamber in replacement 600 x 600 x 600 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.
Supply and fixing of water heater storage type, 50 ltr capacity suitable for high pressure upto 8 bar , of wattage 2 KW, single phase 230 volt, 50 Hz of BEE 5 star rated complete all as specified and directed. Make - Racold/ Bajaj/ Havells
aarohi nirman company
J.B.ENTERPRISES
SAXENA BANDHU
M/S SDS Construction Co.
SHYAMA CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .