SPECIAL REPAIR AND REPALCEMENT OF OLD DETERIORATED BROKEN MAIN WATER SUPPLY LINE AT OUTLAYING AREA SPECIAL REPAIR OF PROMENADE BATHROOM WATER PROOFING TREATMENT OF PO16 BUILDING REPAIR/ REPLACEMENT OF IRON TERRACE DOOR AT WNC O MESS UNDER GE NW NOFRA

Amount

Taking down old unserviceable rusted pipe . Supply and laying GI tubing 150 mm dia medium grade with all fitting and fixture such as tee, socket, bend, union etc in trenches complete. Make : TATA/Jindal/Zenith/surya prakash

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking out soft/disintegrated soil for laying of cable /evection of pole/stay pit excavation

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and taking outHard/dense- soil for laying of cable /evection of pole/stay pit excavation

Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point

Material and labour for PCC 1:2:4 type B-1 using (using 20mm graded stone aggregate) as in copings for pole including necessary form work etc complete all as specified and directed by Engineer-in-Charge

Taking down old damaged sluice valve . S&F of unserviceable with new sluice valve flanged type with brass spindle including rubber, packing materials, nut, bolts and washers with locking arrangement in such a way that the valve can be locked in its open position ISI marked on body conforming to IS-14846 PN-1.6 of size 150 mm dia all as directed by EIC. Make : BIR/Zoloto/Kishan/ kirloskar/L &T

Construction of brick masonry valve pit of size (105 x 105 x 105cm (finished internal dimensions ) using sub class "B" brick masonry in cement mortar cm 1:4 including plastering internally in CM 1:4 including 1:4:8 using 40 mm graded agreegate over 100 mm hardcore and painted flush externally as the work proceeds and PCC 1:2:4 type B-1 as in copping with repair/welding of angle iron frame 40 mm x 40 mm x 6 mm with 2 mm thick MS sheet cover two side open with 2 Nos hinges each side and 2 Nos lifting handle and in built locking arrangement including lock and key and surface with two coats of synthetic black paint and a coats of red oxide paint on steel surface including necessary excavation in any type of soil, earth work in any type of soil to distance n.exc 50 m all as speified also included in this schedule of rate including returning/filling of earth and removing surplus soil as decided.

Taking out old rusted pipe as per existing site and welding/ cutting work for MS/GI pipe of 150 mm dia fixing of pipe as required shape and length for fixing new pipe complete all as specified and as directed.

Material and labour for rubber gasket joint including nut/bolts for flanged pipe 150 mm dia pipe , complete with jointing materials for jointing fittings with pipe all as specified, (Excavation shall be measured and paid separately

Material and labour for joints with 10 mm thick MS flanges slip type through welded to MS pipes complete with jointing materials such as rubber, gasket, nut bolts and washer etc for 150 mm bore pipe complete all as specified and as directed.

Taking out old NRV . S&F in replacement of unserviceable with new non return valve of CI body 100 mm bore flanged with rubber packing including nuts bolts and wahsers etc complete as directed by EIC : Make : Zolota / Leader / HM

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F framed work such as grills,gratings, Mild steel in flat, round or square bars etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; rallings; framework of watertanks and similar work conforming to Fe 290 Gde-E-165.for Servant balcony portion and including existing wooden frame with wire mesh etc complete all as specified and as directed by Engineer-in-Charge.

S&F for Mild steel plain sheet 1.60mm thick black sheet in wall cladding, steel gates and similar work cut to size ,hole punched, incl round headed screw,clout nails or rivet and fixing to wood or steel framing with plain 40mm lap joints with riveted or seams, incl bending or turning up mitred angles, etc as required as specified.

M&L for PCC 1:2:4 type B2(40mm aggraded aggregate ) as fdn filling and mass concrete as in sub base complete.

M&L preparation of new steel surface of any description not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement including taking down complete all as specified and directed.

M & L rendering 10 mm thick cement plastering on brick or concrete surfaces in CM (1:4) finished even and smooth without using extra cement all as specified and directed, as in ceiling including taking down complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed. MAKE : Asain Pain Tractor uno or Berger Bison or equivalant in narolac

All as item No 20 above but on ceiling complete.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 20 mm thick in cm 1:6 complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick rectified (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge Make : Kajaria, Somany, Orient bell

M & L Glazed coloured ceramic tiles in vertical surfaces 300mmx450mmx7mm thick including over 10mm thick rendering of cement mortar (1:4) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge. Make : Kajaria, Somany, Orient bell

Supply and fix 100 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer In Charge

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray complete all as specified.Make: Jaquar Cat Part No : FLR-5041N

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as specified.

M&L for brick work with sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

M & L for Plastering 15mm thick on brick ,concrete or dubbed wall surfaces in cement mortar 1:4 finishing even and smooth without using extra cement to fascia,fins,parapet, soffits of chhajjas etc and similar likes at any height including necessary scaffolding, ladder, formork ; including taking down cement / lime plaster of any description on brick or stone walls etc, raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for Plastering 10mm thick on ceiling concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement etc and similar likes at any height including necessary scaffolding, ladder, formork ; including taking down cement / lime plaster of any description on brick or stone walls etc, raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper etc complete at any height including necessary scaffolding all as specified and as directed.

Taking down chowkhat or frame n exc 1.5 Sqm each without taking off shutter of any discription complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

S&F anodised aluminium 50 micron powder coated frame for door, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F anodised aluminium 50 micron powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised, handle 2 nos in each window aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F aluminum grill of design and parttern as approved including aluminium beading complete.

S&F PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as per specification and all as per drawing. Make :- M/s Sintex Industries Ltd, M/s Rajshree Plastiwood Ltd,

S & F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and as per drawing. Make :- M/s Sintex Industries Ltd, M/s Rajshree Plastiwood Ltd,

S&F Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed

S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed

S&F stainless steel butt hinges of size 100mm all as specified and directed.

Taking up or down steel tubing and connections and removing from store of following sizes, complete all as directed

(a) 20 mm bore

(b) 15 mm bore

Supply and fix steel water tubing galvanised medium grade of following size, with all fitting fixed complete to walls,duct and ceilings or laid in floor/wall/ceiling (in high rise building including scafolding) complete all as specified and directed. Make : Jindal

(a) 20 mm bore

(b) 15 mm bore

Cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.

S&F Table Top ceramic wash hand basin vitreous china oval shape It has a smooth finish and (Colour approved by GE) of size 630x425x160mm, make is Jauqar fonte with including brass chromium plated waste coupling 32mm with long screwed and fly nuts ,incl 60 cm long,32mm dia PVC(flaxible) type waste pipe fixed as in repairs ( cat part No JDS-WHT-25901) Make:- Jaquar , Grohe, Kohler.

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover including connection to drowm pipe and flushing pipe all as specified.

S&F PVC low level flushing cistern with dual flushing system including brackets 5 or 10 litre capacity COMMANDER/SLIM LINE, with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs.

Supply and fix in repair chromium plated brass health faucit (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked all as per Cat Part No 573 of Jaquar or equvalent in Make MARC,Plumber.

S&F stainless steel toilet paper holder fixed to walls in repairs with chromium plated brass screws complete.

S & F Vitreous China bowl urinal flat back with sensor with fixing accessories set, size of 485 x 310 x 710 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe Make of urinal : jaquar cat part no. URS-wht-13255 & Make of sensor :cat part no. SNR-CHR-51097

Supply and fix in repair 450 mm long PVC connectors with brass adapters, washers etc complete all as directed.

Supply and fix fancy type chromium plated brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : CON-059KN

Supply and fix fancy type chromium plated brass Bib tap with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified. Make: Jaquar Cat Part No : CON-047KN

S&F in repairs 15mm pillar taps sensotronic sensor faucet for wash basin and fly nuts screwed for iron pipe and fixed Make : Jaquar cat part no. SNR-CHR-51021)

Taking down of existing tarfelt and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming , wire brushing incl removing the debrish from MOD land complete all as specified and directed

M&L for 15mm thick rendering on concrete surface on roof in cement plaster 1:4 finished even and fair without using extra cement by using Dr. fixit @ 3% of wt of cement content complete all as directed. (Note: Water proofing Compound measured and paid seprately)

Supply only water proofing compound all as directed Make : Dr Fixit or equvalent

M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 150 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before and after laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longtitudinally, At the junction of roof and parapet wall a grove of 75mm wide and 65mm deep and shaping horizontal of groov withr 1:3 with bituminious mastic joints/overlap shall be sealed with hot bitumen 85/25 all as specified and completed

Demolition of brick work built in cement mortar or cement lime mortar complet e all as specified and directed as directed by Engr-in- Charge and removing debris out of MOD land.

M&L for brick work with subclass 'B, brick, straight or curved on plain eexceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as dircted by Engr-in- charge .

Disconnecting existing tanks of capacitycapacity exc 250 and nexc 500 ltr of PVC , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting existing tanks of capacitycapacity exc 500 and nexc 1000 ltr of PVC , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Taking up or down 15 mm steel tubing and connections including cleaning for refixing .

Taking up or down 20 mm steel tubing and connections including cleaning for refixing.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15mm thick rendering on walls brick/concrete surface in cement plaster 1:4 finished even and fair without using extra cement including waterproofing compount Dr. fixit @ 3 % of wt of cement content or equvalent as the percentage as per concerned manufacture instructions complete all as directed and approved by engineer incharge and GE (Note: Water proofing Compound measured and paid seprately)

Preparation of newly plastered surface and Finishing walls with premium Acrylic Smooth exterior paint with Silicone additives of required shade, New work (Two coats applied @1.43 ltr/10 sqm over priming coat of exterior primer applied @ 2.20 kg/10 sqm)all as specified and directed

Material and labour for providing cement concrete PCC (1:2:4) type B1 (20mm graded aggregate) as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom side including necessary form work etc complete all as specified and as directed by engineeer in Charge.

Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) all as specified and completed

Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors) etc all as specified and completed

Material and Labour for 15mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors and cutting holes n exc 100 sqcm superficial area chase,pinning in making good to facings where required in pointing in cement mortar 1:3 for concealed water tubing complete all as specified .

Material and Labour for 20mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors and cutting holes n exc 100 sqcm superficial area chase,pinning in making good to facings where required in pointing in cement mortar 1:3 for concealed water tubing complete all as specified.

Taking down rain water pipes (any size or pattern) including all fitting heads, shoes, bends swan -necks,

S&F PVC(SWR) bends any radius, 110 mm bore complete

Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore complete.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :- Make of wire - Polycab / Finolex / Havells Make of Conduit - Pressfit / Precision

(a) One light point controlled by one switch SP one way.

(b) One Ceiling/Exhaust fan point controlled with one 5A switch

(c) One 3 pin socket outlet 5Amps on independant board.

(d) One 3 pin socket outlet 5Amps on same board with other switches.

Material and Labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of wire - Polycab / Finolex / Havells Make of Conduit - Pressfit / Precision

Supply and fix in repair Modular Switch, 6Amp, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular blank plate, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular Switch, 16Amp, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified. Make - Legrand /Gold Medal / Anchor

Supply and fix in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular white cover plate with Frame 1 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 2 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 3 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular white cover plate with Frame 8 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 3 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Modular metal flush box 8 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fix in repair Linear Aluminium Baten LED T/L 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. Make- SHAKTI CAT PART No. SZSLAMX020 or Philips / Havells/ Jaquar or equivalent

Supply and fix in repair Decorative type LED T/L 10W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. Make- Philips / Havells/ Jaquar or equivalent

Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc.

S&F 8 way Double door type having protrection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make- Havells/ Philips/ Legrand

S & F MCB SPN 40 Amps, 240 Volts, C Series . Make Legrand Model No 408620.

S & F MCB SP 6-32 Amps, 240 Volts, C Series . Make Legrand Model No 408595

Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and blades to MES E/M Store ,all as directed by Engr-in- charge.

S&F Exhaust fan 225 mm sweep, 1400 RPM plastic ABS body without sound with automatic shutter, AC supply, single phase, 230 volts, 50Hz,including cutting into the wall and finishing with CM 1:6, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site. Make-Orient/Syska/Crompton/Havells/Usha

S & Fix Pressure Pump suitable for bathrooms upto 6 Washing points all as specified and directed by Engineer - in Charge.

Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note :- Only compacted thickness of sand will be measured and paid as per SSR Part -I and excavation earth work shall be measured under item No 2, 4 & 5 have in before.

Supplying and laying un-reinforced precast concrete cable cover, class LV Type I, flat, size 250 mm x 150 mm x 40 mm. laid in trenches complete all as specified and directed.

Supply, laying, commisssion & testing in repairs XLPE insulated armoured LT cable, 1100 Volts grade with aluminium conductor of size 4 core 16 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed. Make - Polycab/ Finolex / Havells

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

GANGAJAL