Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹87,500Accepted-Finance | L1 | Accepted-Finance BOQ Accepted | |
| 2 | L2₹90,000+₹2,500 (2.86%)Accepted-Finance | L2 | Accepted-Finance BOQ Accepted |
| Sl No | Description | Qty | Unit | ANNA RAJAN ENTERPRISES L2 | C.THENNARASU CONTRATOR L1 |
|---|---|---|---|---|---|
| 1.00 | Charges for worn out & damaged bend pulley by Second hand bend pulley in Conveyor 43. Loading and unloading, lifting up of 15 tonnes counter weight at the take up tower of conveyor 43 using 2 nos. 7 tonne capacity chain pulley block to the safe height, transporting belt clamps 4 nos. from section stores and clamping the released belt after removing of idler frames with rollers at these locations by gas cutting for removing the bolts and nuts, pulling and lifting the belt from the pulley at the head end of conveyor 43 using pull lift and chain blocks, slings etc., and clamping the belt, slack pulling the belt and removing the bend pulley from its position and unloading the same to ground using chain blocks and slings, locking the pulley and dismantling the plummer blocks and removing the bearing along with accessories such as adopter sleeve lock nut, lock washer lock rings etc., by using pullers on both sides, assembling the bearings in position with released adopter sleeve, lock nut, lock washer and locating rings etc., to second hand bend pulley greasing the bearings and locking with plummer block top cover and tightening the bolts of plummer block at drive end side of end pulley on both sides, lifting, loading the second hand bend pulley from ground to its position using chain pulley block and arresting the plummer block base with boom structure and tightening the bolt with proper alignment, releasing the belt clamp fitting the idler frames and assembling the idler with frame for carrying and return side of conveyor 43, releasing the counter weight to the original position and normalizing the belt conducting trial run operation and bringing back the clamps to pocket store. | 1 | Operation | 90,000 ₹1,06,200 | 87,500 ₹1,03,250 Lowest |
Tender Value
Refer Docs
Closing Date
21 Sept 2026, 2:00 pmClosed
Chief Engineer/TTPS
O/o CE/TTPS
ECHP-I- Replacement of worn out and damaged bend pulley south by second hand bend pulley south in Conveyor-43
2026_EB_701711_1
CE/TTPS/SE/MI/100/2026-2027
Open Tender
Miscellaneous Works
Works
3 days
TTPS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Yes
25 Sept 2026
5 Sept 2026
22 Sept 2026
5 Sept 2026
21 Sept 2026
5 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for worn out & damaged bend pulley by Second hand bend pulley in Conveyor 43. Loading and unloading, lifting up of 15 tonnes counter weight at the take up tower of conveyor 43 using 2 nos. 7 tonne capacity chain pulley block to the safe height, transporting belt clamps 4 nos. from section stores and clamping the released belt after removing of idler frames with rollers at these locations by gas cutting for removing the bolts and nuts, pulling and lifting the belt from the pulley at the head end of conveyor 43 using pull lift and chain blocks, slings etc., and clamping the belt, slack pulling the belt and removing the bend pulley from its position and unloading the same to ground using chain blocks and slings, locking the pulley and dismantling the plummer blocks and removing the bearing along with accessories such as adopter sleeve lock nut, lock washer lock rings etc., by using pullers on both sides, assembling the bearings in position with released adopter sleeve, lock nut, lock washer and locating rings etc., to second hand bend pulley greasing the bearings and locking with plummer block top cover and tightening the bolts of plummer block at drive end side of end pulley on both sides, lifting, loading the second hand bend pulley from ground to its position using chain pulley block and arresting the plummer block base with boom structure and tightening the bolt with proper alignment, releasing the belt clamp fitting the idler frames and assembling the idler with frame for carrying and return side of conveyor 43, releasing the counter weight to the original position and normalizing the belt conducting trial run operation and bringing back the clamps to pocket store. | 1 | Operation | 55 | ₹55 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_843477.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .