Repair and Construction of Nali work and Coursed stone Paving work in ward No. 03, 06, 11, 15, 16, 17, 23, 29, 33, 35

Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.Depth upto 1.5 m

Earth work in excavation for roadway, including trimmingbottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. In all type of soil

Carriage of Materials by mechanical transport including loading, unloading and stacking 3 km.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of oarse aggregate not exceeding 25 mm, aggregate cement atio not to eed 15:1, aggregate gradation after lending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be ned during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

6.26 Supplying and fixing ashlar sills, jambs, skirting, steps etc.rough dressed:6.26.1 (A) Upto 15 cm thick Soorsagar or eqvt. White Ashlar

6.36 Fine dressing of ashlar stone work (payable on ExecutiveEngineer's test checking): (A) White Ashlar one line

Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm )

Fine dressed stone flooring over 20 mm (average) thick baseof cement mortar 1:4 ( 1cement : 4 coarse sand) with jointsfinished flush. White Sand stone size not less than 1350 Cm2 c) 75mm thick

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing