REPAIR MAINT TO PLUMBING SANITARY FITTINGS SWR PIPES CHAJJA JOINERY FLOORING MASSONARY ELECTRICAL FITTINGS FIXTURES AND PERIODICAL SERVICES WELCOME MAINT OF OFFRS MD ACCN AT HAPPY VALLEY AND MD JCOS OR QTRS AT JESUDASAM ENCLAVE AJMER SINGH ENC

Amount

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down shutter of any description not exceeding 1 sqm each complete all as specified and directed.

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down shutter of any description exceeding 1 sqm but not exc 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II (2010).

M&L 2nd class hard wood plain solid straight chowkhat & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 35 mm thick 2nd class hard wood plain framed panelled shutter (of any no of panel) with panels of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneered ; supplied and fitted to chowkats etc complete all as specified and directed

M&L 35 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. but divided into squares, with plain, chamfered or rounded mitered and rebated sash bars any numbers, size of members of shutter as specified in SSR Part –I section 8, claused 8.20 (a) complete all as specified and directed.

M&L 30 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. but divided into squares, with plain, chamfered or rounded mitered and rebated sash bars any numbers, size of members of shutter as specified in SSR Part –I section 8, claused 8.20 (b) complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or rebated, or forged into spikes, framed guard bars, barred iron doors, ladders, railing etc complete all as specified and directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

S&F 150 mm long aluminium handles cast type, anodized complete all as specified and directed

S&F 100 mm long aluminium handles cast type, anodized complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 125 mm butt hinges, mild steel medium weight cold rolled complete all as specified and directed

S&F 100 mm butt hinges, mild steel medium weight cold rolled complete all as specified and directed

S&F 75 mm butt hinges, mild steel medium weight cold rolled complete all as specified and directed

S&F in repair 150 mm long aluminium anodized handles fabricated type complete all as specified and directed

S&F in repair 100 mm long aluminium anodized handles fabricated type complete all as specified and directed

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm butt hinges, mild steel medium weight cold rolled fixing complete all as specified and directed

S&F in repair 125 mm butt hinges, mild steel medium weight cold rolled complete fixing all as specified and directed

S&F in repair 75 mm butt hinges, mild steel medium weight cold rolled complete fixing all as specified and directed

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F MS work as in hold fast/clamps including nut & bolts iron screw for hold fast confirming to FC 290 Gde E-165 complete all as specified and directed

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing of hold fast/benching/any type etc complete all as specified and directed

M & L for running welding in reapir of n exe 6 mm metal complete all as specified and directed

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass/frusted ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair perforated aluminium alloy wire cloth for mosquito proofing, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed

S&F in repair perforated stainless steel wire cloth for mosquito proofing, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with staples complete all as specified and directed

S&F in repair aluminium alloy wire cloth for mosquito proofing, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed and jointed between iron strip of steel doors fixed with nuts/bolts including dismenteling of existing wire cloth from steel door incl cutting the sustained nuts & bolts complete all as specified and directed.

Taking down cupboard door of any description in any position complete all as specified and directed

M & L prelaminated particle board 19 mm thick, interior grade prelaminate one side with decorative choice lamination fixed with screw to timber frame work complete all as specified and directed

S&F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed

S & F 2 nd class wood beading fixed in position with nail area exc 3 Sqcm n exc 6 sqcm all as specified and directed.

S & F magnetic catcher with nut and screw of mild steel bright finish all as specified and directed

S & F 40 mm dia cupboard nobe fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed

S & F hasp and stapple safety type aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed

Taking down existing pelmet box of any description in any position complete with all fittings all as specified and directed

S&F MS pipe 20 mm bore curtain rod mild steel chromoum plated with fixing brackets, stops, complete all as specified and directed

S&F in repairs MS pipe 20 mm bore curtain rod mild steel chromoum plated with fixing brackets, stops, complete all as specified and directed

M&L 12 mm thick prelaminated particle board , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed

M & L coloured vitrified tiles 10 mm thick (square/rectangular)polish area of each tiles n exc 0.36 Sqm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor incl 20 mm thick screed bed in CM 1:4 complete all as specified and directed

M & L coloured vitrified tiles 10 mm thick (square/rectangular)polish area of each tiles n exc 0.36 Sqm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles but in verticle surface incl 10 mm thick rendreing bed in CM 1:3 complete all as specified and directed

S&F non skid coloured ceramic tiles 300 X 300 X 7 to 8 mm thick coloured or printed jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1.6 a complete all as specified and directed

M&L non skid coloured ceramic tiles 400 X 400 X 7 to 8 mm thick (coloured or printed) jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1.6 complete all as specified and directed

All as per itme No 55 above but of size 400 X 100/300x200 X 7 to 8 mm thick glazed tile on vertical surface such as skirting and riser over and including rendering fair faces of brick work 10 mm thick in CM 1:4 complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 using 12.5 mm graded stone aggregate as in levelling course complete all as specified and directed.

M&L in repair Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete incl 15 mm thick screed bed or bedding layer with CM (1:6) etc all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed

M&L preparation of old painted surfaces of wall and applying one coat of cement based tank on walls complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick below or above the ground floor etc complete all as specified and directed

M&L Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L providing glossy designer chequered tiles 20 cm X 20 cm X 22 to 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and no pigment laid over and including screed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed

M&L 50 mm thick cement concrete 1:3:6 using 20 mm graded stone aggregate as in floor, plinth protection etc and finishing cement concrete even and smooth without using extra cement complete all as specified and directed .

S&F in repair aluminium door closer hydraulically regulated designation No.2 cast iron body universal type suitable for door shutter 701-850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless cover, governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

Taking up or down 15mm bore steel tubing and & connections including and making good the disturbed surfaces complete all as specified and directed.

Taking up or down 20mm bore steel tubing and & connections including and making good the disturbed surfaces complete all as specified and directed .

S&F 15 mm bore galvanised steel water tuning, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

S&F20 mm bore galvanised steel water tuning, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed

Refixing 15/20 mm bore old steel tubing with new connections in new or old position (walls, ceiling floors etc) complete all as specified and directed

S&F in repair 15 mm bore Chromoium plated bib taps, cast copper alloy with crutch or butterfly handle screwed down,fancy type screwed for iron pipe or brass ferrule, complete all as specified and directed.

Taking down bib tape /wash basin tap/pillar tap/stop cock/mixture tape and refixing the same after reapir and replacement of washer 15 mm bore size complete all as specified and directed.Note: spindle where required will be measured and paid separately

Supply only brass spindle of 15 mm bore complete all as specified and directed

S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality complete all as specified and directed

S & F in repair Brass chromium plated Basin mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality complete all as specified and directed. cat CQT-23321 B make Jaguar.

S&F in repair 15 mm bore Chromoium plated angle cock, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium platedscrewed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop cock, cast copper alloy screwed down high pressure with crutch & butterfly handle fancy type chromium plated screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and ply nuts 15 mm bore complete all as specified and directed

S & F in repair bottle trap chromium plated for WHB as per approved quality complete all as specified and directed

S&F in repair PVC waste pipe for urinal/WHB etc complete all as specified and directed

S&F in repairs 32 mm bore waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed

S&F grating PVC 125 mm dia with waste hole of PTMT etc (minimum weight 40 gm) complete all as specified and directed

S&F in repair PVC grating doom 100 mm dia fixed in floor in CM 1:3 complete all as specified and directed

S & F in repair CP Jet spray/Health faucet for 15 mm bore complete all as specified and directed

S & F in repair Toilet Paper holder chromium plated fixed to wall complete all as specified and directed

S&F in repairs vitreous china wash basin white, flat back type of size 550 X 400 mm including cutting for and pinning in ends of brackets including 32 mm dia chromium plated waste coupling, PVC waste pipe, brackets complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white fixed etc. complete all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.

S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed

S& F in repair 1 mm thick stainless steel plate rack of size 900X600X200 incl fixing with rawal plug and screws complete all as specified and directed.

S&F in repair ball float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screw for 20 mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. 25 mm bore complete all as specified and directed.

S & F in repair 125 mm dia chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed

S & F in repair internal fitting for low level flushing cistern complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

S&F in repair EWC sheet cover complete all as specified and directed

S&F in repair rotational moulded polyethylene water storage tank of 500 litre capacity, hoisted and fixed in position incl dismantiling complete all as specified and directed

S&F in repair 1000 litre capacity PVC Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position incl dismantling complete all as specified and directed

S&F in repairs CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed

S & F in repair chromium plated towel ring with bracket complete all as specified and directed Cat 7721 make Jaguar

S & F in repair brass mortice lock size 75 mm 2 lever complete all as specified and directed

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed

S & F in repair gun metal gate valve 20 mm dia with iron wheel head ,screwed both eand for iron pipe complete all as specified and directed.

Demolition of existing sunken water proofing treatment/cement plaster/cement concrete any descripltion and removing the debris from site n exc 150 m from site complete all as specified and directed.

M&L Supply only cement concrete type B1 1:2:4 (20 mm graded agg) as in padding concrete/coving for in Jn of sunken floor and vertical wall or to maintain proper slope on roof chamfored on edge complete all as specified and directed.

M&L for filling polymer modified non shrinking slurry for sunken floors for toilets by drilling holes 60mm by 20mm dia at 1 mtr interval and applying slurry all as per technical specification

M&L for epoxy treatment to sunken floors and testing the same after 48 hours with complete filling with in the sunken floor complete all as specified and directed

M&l for PCC (1:4:8) type D2 in foundations, filling mass concrete complete all as specified and directed .

M & L 100 mm thick PCC 1:2:4 Type B2 using 40 mm graded aggregate as in wearing course of floor complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B0 mixed with WPC at 2% by weight of cement complete all as specified and directed

M & L for rendering 10 mm thick CM 1:3 surface as in roof with 3% integral water proofing compound by the weight of cement complete all as specified and directed

M & L for new wooden surface over 100 mm width/girth and adding 2 coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick incl aluminium grill and 4 mm thick tinted glass incl beading and necessary rubber packing ,locking arrangement opening arrangement in all fitting and fixture complete all as specified and directed.

S&F in repair cabinet mirror in bathroom complete all as specified and directed

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S & F in repair mild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete all as specified and directed

S & F Magic Eyes for doors complete all as specified and directed

S&F Towel Rack 600 mm long without lower Hangers but with 3 hooks Cat CAN-1181 FHN make Jaguar complete all as specified and directed

M&L preparation of old painted surfaces and applying one coat of white wash on walls complete all as specified and directed

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and directed

M&L preparation of old painted surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed

Complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as specified and directed

M&L preparation of old painted surfaces and applying one coat of cement based paint on wallscomplete all as specified and directed

M&L preparation of old painted surfaces and applying two coat of cement based paint over one coat of alkali resistant primer incl all necessary work as per site requitment complete all as specified and directed

M&L preparation of old painted surfaces and applying one coat of anti fungal weather coatpaint on walls complete all as specified and directed

M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified and directed

M&L for taking down carefully old UNSV aluminium point wiring with wooden batten and all accessories of(light, fan, socket or power) such as switches socket ceiling rose, fan regulators, light fitting, main switches DB’s etc and making good disturb surface complete all as specified and directed

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC casing caping duly surface continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, MS box including laminated top sheet cover,washer & screw complete all as specified and directed for One light point controlled by one, one way switch.

All as per item No 145 above but for One fan point controlled by one, one way switch.

All as per item No 145 above but for One exhaust fan point controlled by one, one way switch.

All as per item No 145 above but for One 5 Amp socket point controlled by one switch on independent board

All as per itme No 145 above but for One 5 Amp socket point controlled by one switch on same board

One light point controlled by two 2 - w a y s w i t c h e s , with cables 1.5 sq. mm

All as per item No 145 above but with cable PVC insulated 4.0 Sq mm (FR) in and including PVC casing caping incl continuous earthing with cable PVC insulated 2.5 Sq mm copper conductor for power socket 15Amps (Make : Anchor/ Standard/ Finolex/Havells/HPL)

S&F switch socket combination 2-in-1, 5 pin 5 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S&F switch socket outlet 5 pin 5 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S&F switch socket combination 2-in-1, 5 pin 5 and 15 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F switch piano (Flush type) 5 amps, 240 Volts, single pole one way.

S & Fix switch piano (Flush type) 5 amps, 240 Volts, single pole two way.

S/Fix ceiling rose, bakelite three terminal complete all as specified and as directed

S & F bell ding dong electric single phase 240 Volt. Make : (Cable make Anchor/Havells / Finolex/RR Kabel)

S & F ceiling fan regulator electronic step type socket mounting type. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size complete all as specified and directed

S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)

S & F lamp holder PVC insulated body suitable for batten fitting straight/angle modular type with LED reterofit bulb 9 watts cap complete all as specified and directed Make-Anchor/leader/SSK and bulbs C&S, Havells, Crompton

Supply and fix in replacement of bldg security light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : must for warrenty of 3 yrs to 5 yrs)

M&L for replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor complete all as specified and directed .(Cable make Anchor/ Havells /Finolex)

M&L of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC conduit with surface wiring continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

S & F sheet metal enclosure double door MCB DB, SPN 8way complete all as specified and directed

S & F MCCB 100 Amps 4 Pole 25 KA 415Volts (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCCB 63 Amps 4 Pole 16 KA 415Volts (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F TPN 40 Amps 415Volts (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCB SPN 16 TO 32 Amp 10 KA 240 Volts (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCB, SP 6 to 30 Amp 240 Volts rating (Make : Anchor/ Standard/ C&S/Havells/HPL)

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed

S & F in minor repairs to FTL fittings by replacing bi-pin holders, connections , tube rods of any type and capacity etc complete all as specified and as directed (Note : Tube rods shall be issued under Sch B stores from MES Stores)

S & F PVC conduit pipe 20mm dia complete alongwith necessary fixing arrangement complete all as specified and as directed

S & Fix PVC casing capping 25mm complete alongwith necessary fixing arrangement complete all as specified and as directed

S&F in replacement of Electronic Ballast suitable for 36/40 watts FTL conventional light fittings complete all as specified and directed (Make Anchor, havells, Bajaj, CG, C&S)

S& Fix in replacement of Electronic Ballast suitable for 28 watts FTL conventional light fittings complete all as specified and directed (Make Anchor, havells, Bajaj, CG, C&S)

M&L, for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning complete all as specified and as directed

M/S JAGANNATH SASMAL

c p engineering works

M/s MAA BHAIRABI ENTERPRISES

M/S. KISHAN ENGINEERING

M/s Ats Electricals

M/S S.K GHOSE

M/S SIWALIK AND CO