Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹5.0 L+₹6,953.61 (1.40%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | Ohm Muruga Constructions L1 | SAI JYOTHI BUILDERS L2 |
|---|---|---|---|---|---|
| 1.00Construction Of Co-location of CSC with Panchayat Bhavan in Kothakottai Panchayat. | |||||
| 2.00 | Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B | 13.69 | cum | 240 ₹3,285.6 Lowest | 350 ₹4,791.5 |
| 3.00 | Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete | 4.29 | cum | 5,480 ₹23,509.2 Lowest | 5,480 ₹23,509.2 Lowest |
| 4.00 | Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete | 1.27 | cum | 6,855.02 ₹8,705.88 Lowest | 6,855.02 ₹8,705.88 Lowest |
| 5.00 | Filling with Excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification. | 6.66 | cum | 42.85 ₹285.38 Lowest | 42.85 ₹285.38 Lowest |
| 6.00 | Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. | 11.22 | cum | 5,995.54 ₹67,269.96 Lowest | 5,995.54 ₹67,269.96 Lowest |
| 7.00 | Centering charges for RCC works including all cost and conveyance all materials to site etc., complete. Below GL | 8.37 | sqm | 516.5 ₹4,323.11 Lowest | 650 ₹5,440.5 |
| 8.00 | Centering charges for RCC works including all cost and conveyance all materials to site etc., complete. Above GL | 35.4 | sqm | 1,033 ₹36,568.2 Lowest | 1,033 ₹36,568.2 Lowest |
| 9.00 | Supplying and fabrication of steel of RCC works including all cost and conveyance and all labour charges such as cutting bending tying and placed in position etc., complete. | 0.74 | MT | 89,883.5 ₹66,513.79 Lowest | 89,883.5 ₹66,513.79 Lowest |
| 10.00 | RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering. | 7.37 | cum | 9,264.46 ₹68,279.07 Lowest | 9,264.46 ₹68,279.07 Lowest |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
4 Aug 2025, 3:00 pmClosed
The Block Development officer (VP) Alangayam
The Block Development officer (VP) Alangayam
Tirupathur District RRGSA 2025-26 Construction of Co-Location of CSC with Panchayat Bhavan in Kothakottai Panchayat.
2025_RDTN_587975_1
B5/3562289/2025
Open Tender
Civil Works
Item Wise
180 days
Alangaym Block
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹10,000
19 Sept 2025
1 Aug 2025
4 Aug 2025
1 Aug 2025
4 Aug 2025
1 Aug 2025
Amount
Construction Of Co-location of CSC with Panchayat Bhavan in Kothakottai Panchayat.
Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B
Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete
Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete
Filling with Excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.
Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.
Centering charges for RCC works including all cost and conveyance all materials to site etc., complete. Below GL
Centering charges for RCC works including all cost and conveyance all materials to site etc., complete. Above GL
Supplying and fabrication of steel of RCC works including all cost and conveyance and all labour charges such as cutting bending tying and placed in position etc., complete.
RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer before use on work
Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete
Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete
Distempering two coats using best quality and approved colour of oil bound distemper over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc., complete.
Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.
Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Supply & Delivery of Doors (0.90 x 2.10m)
Supply & Delivery of Windows (1.150 x 1.20m)
ceiling fan
Light point
Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125)
Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70
Supplying of Caddapha slab including all cost etc…
Labour charges for fixing of Caddapha slab including all cost etc…
Nameboard arrangements
Providing photographic charges
GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}
SAI JYOTHI BUILDERS (BID ID -1418371)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_702475.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .