Repairs to certain Road under AGE B and R II of GE East JRC

Amount

M & L for repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @ 9.8 Kg Per Ten Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and directed.

M&L for premix bituminous macadam laid/rolled and compacted required gradient and camber (consolidated thickness 75 mm or less). with paving bitumen any penetration @ 4% by weight of total mix complete rolling to uniform smooth surface with 8 to 10 tonne power road roller complete all as specified and directed.

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat of paving bitumen VG -10 at the rate of 5 Kgs per 10 square metre of existing road surface laying bituminous pre-mix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content paving bitumen VG 30 mixed in hot mix plant, laid, rolled and compacted to required camber and gradient with 8 to12 tonne power road roller complete all as specified and directed complete all as specified and directed. Note:- Mix shall be prepared in Hot Mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

M&L providing and marking broken centre line /side lines /Zebra lines on road pavement and the like of any description and width with thermoplasitc paint hot applied with machine conforimng to BS-3262 and according to the specification laid down by IRC & MOST (Ministry of Surface Transport) specification 2001(4th revision) complete all as specified.

Supply and fixing road studs high density make - 3M-290 Series or Equivalent reflective lens ABS plastic body yellow coloured 90 x 100x 17 mm fixed with nails and adhesive including taking down old road studs in any type.

S&F DUAL-DIRECTIONAL delineator made out of 16 guage MS Rectangular pipe of size 25 x 68 mm and of length 600 mm. Pipe stove enamelled and baked to 120 degree C/Powder coated. Head made out of ABS Plastic rectangular moulded with flat face provided with High Intensity Prismatic Reflectors of colour (white/yellow/red) of size 100 x 125 mm (total height 750 mm) with additional 2 reflective strips of 25 mm wide on both sides, fixing complete all as specified and directed. Cat Part No . GPL-UBPH-11-56 of Make : GREENS/GREENLITE or equivalent as approved by GE. Including taking down old delineator in any type.

S&F in repair SOLAR STUD size of 125mm x 125mm x 25mm, made from aluminium alloy and PC construction, solar controller, Model - DHR UV (DA-110) or "DARK EYE" or equivalent as approved by GE fixing complete all as specified and directed.

S&F SOLAR DELINEATOR made from polycarbonate and toughened aluminium alloy body. Height- 145mm, diameter - 80mm, Delineator height - 80mm, comprises of 4 super bright LEDs which give 360 degree viewing. Solar Panel - 2.5 V, 120 mm (approx) 1.25 V rechargeable battery - 1 No. Delineator also has high intensity retro-reflective band of 25mm width for extra visibility including post 1000mm x 47mm powder coated MS pipe. Fixing complete all as specified and directed. Manufactured by "DARK EYE" (Model- DA-112) or equivalent as approved by GE

S&F plastic speed breaker for roads at various locations of size 350x250x75 mm complete as per specification and as directed.

M&L for demolition of cement concrete of any description and in any position complete all as specified and as directed

M&L for Providing precast cement concrete Type B-1, 1:2:4 (20mm graded stone aggregate) in CM 1:4 as in kerb stones, win dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat ing etc. and setting in mortar complete with joints to match, complete all as specified and directed.

M&L for preparation of old painted concrete surfaces of any description over 10cm girth or width and applying one coats of synthetic enamel paint of any colour, complete all as specified and as directed.

M&L for preparation new surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint of any colour over a coat of priming paint to acchive smooth surface, complete all as specified and as directed.

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3142829)