Supply, installation, testing and commissioning (SITC) of 600 to 650 kVA Diesel Generator Set and allied works

Supply, installation, testing & commissioning of DG Set of capacity 600-650 kVA with acoustic Enclosure (CPCB-IV) (Silent type) with full authority electronic engine & canopy of suitable size complete with alternator, water-cooled, self-starting with suitable coupling with alternator of 600 kVA or above capacity, 415V at 1500 RPM, 3-Phase, 4-wires, 50Hz, 0.8 Power Factor at 415V, Capable of taking 10% overloading for one hour in any 12 hours duration. a.) Supply, fixing of sound proof (silent type) canopy of suitable size for the above DG Set. The Job also includes loading, unloading and shifting from unloading site to the foundation of DG Set. b.) Common base frame Batteries, Leads and Stand Anti Vibration Mountings, Acoustic Enclosure Residential Silencer, Exhaust Below Assembly Hardware First Fill of Lubricating Oil and coolant. c.) Supply, installation, testing & commissioning of the equipments & materials as mentioned in the specification of D.G. Sets (as specified in the Tender document)

Supply, installation, testing & commissioning of AMF Panel consisting of 1000A, 4 pole, 50 kA, ACBs (EDO Type) and all other allied items / accessories / protection etc. complete as required for commissiong for the above-mentioned Diesel Generator Set.

Contruction Of RCC bed for 600 kVA DG Set (6.5 m × 3.25m × 1.50 m)

Making of earthing point with 2 inch dia GI pipe , B class , caged in 6 inch GI pipe , class B in CCM compound and 10 feet Deep, as earthing electrode . The pit is to be dug using borewell and covered with 10×10 inch manhole cover.

Providing and fixing of 25mm x 5mm GI strip from earth points to 600 kVA or above DG Set. The job includes with cost of PVC conduit of appropriate dia through which earthing strip is to be laid.

Supply,fixing,testing & commissioning of fuel pipe 1" dia for fuel supply from HSD oil reserve service tank to day oil tank of 600 KVA or above DG Set with providing/fixing covering of glass wool,chicken mesh and fixing aluminium sheet around the pipe. The job also includes providing ,fixing of union, elbow, socket, Tee, gate valve etc. as per site requirement

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, etc.as required.

450 mm width × 62.5 mm depth × 2.0 mm thickness

Design, Supply, Fabrication and Erection of M.S. Steel structure from channel / angle iron of suitable sizes to support the cable tray duly taking into consideration of the wind load/pressure at the site etc. including the cost of civil foundations as required. The structure shall be given primer coat and two coats of enamel painting.

Design, Supply, Fabrication and Erection of Steel Structure from channel /angle iron/ Flat iron of suitable sizes for making: (A) Ladder along with extension to DG set foundation duly taking into consideration of the wind load/pressure at the site etc. (B) Fencing around the D.G. Set with Chain link fencing and angle Iron grouted in ground in PCC at equal/regular intervals and making of Entry Gate. The Job includes the cost of civil foundations as required. The structure shall be given primer coats and two coats of enamel painting.

Supply of insulated XLPE/PVC Aluminum conductor strip/wire Armoured, overall PVC sheathed, 1.1kV grade cables conforming to relevant IS code and technical specifications.

800 sq. mm 1-core

400 sq. mm 3 ½ core

300 sq. mm 3 ½ core

Supplying and making end termination with and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

800 sq. mm 1-core (for 4 Cables)

400 sq. mm 3 ½ core

300 sq. mm 3 ½ core

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade as required. / XLPE aluminium conductor cable of 1.1 kV grade as required.

400 sq. mm 3 ½ core

300 sq. mm 3 ½ core

Providing and fixing M.V.danger notice plate of 200mm × 150mm, made of mild steel, atleast 2mm thick and vitreo use name led white on both sides and with inscription in single red colour on front side as required.

Supply and laying medium class GI pipe under road/paved areas/wall crossing etc. including earth excavations refilling, ramming and making good as approved. a) 100mm