Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹117.8 CrAccepted-AOC DEE VEE HOUSE MAULSHREE VIHAR IN FRONT OF HOTEL BABYLON INTERNATIONAL VIP ROAD RAIPUR 492006 CHHATTISGARH | ₹117.8 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹127.3 CrRejected-Finance | ₹127.3 Cr | L2 | Rejected-Finance Higher quoted amount than L1 quote |
| 3 | L3₹131.7 CrRejected-Finance | ₹131.7 Cr | L3 | Rejected-Finance Higher quoted amount than L1 quote |
| 4 | L4₹167.4 CrRejected-Finance | ₹167.4 Cr | L4 | Rejected-Finance Higher quoted amount than L1 quote |
| 5 | Rejected-Technical | - | - | Rejected-Technical Techno-commercially not accepted |
Tender Value
Refer Docs
EMD Value
₹1.0 Cr
Closing Date
14 May 2025, 4:00 pmClosed
Mr. Pranav G Dhavale, tkIS
thyssenkrupp Industrial Solutions (India) Private Limited, Uhde House, L. B. S. Marg, Vikhroli West, Mumbai, India-400083
Structural Steel, Mechanical and Piping Works related to Pipe Rack area PR A, B, C and M at Damanjodi, Odisha
2025_NALCO_857197_1
6695-CMG-G00-CA-0060
Open Tender
Construction Works
240 days
Damanjodi
As per NIT
2 documents required · 2 mandatory
₹0
₹1.0 Cr
29/04/2025, 11AM, Mumbai
2 Jul 2025
21 Apr 2025
15 May 2025
21 Apr 2025
14 May 2025
6 May 2025
21 Apr 2025 - 28 Apr 2025
29 Apr 2025
Amount
DAMANJODI SITE
STRUCTURAL STEEL WORKS
Item No: 7.00 Document No: 6695-CVC-G00-EC-0002 STRUCTURAL STEEL WORKS (To be Read in conjuction with Secction 7.0 of Technical Specification Document No. Document No: 6695-CVC-G00-EC-0002 Section 7: CI-UCH-016-07 Part - II Technical Specifications)
Item No: 7.00 Supply of all Structural Steel of minimum 250(Fe410W) Quality A conforming to IS 2062 or British Universal Beams, Columns and Plates – Grade 275JR/JO and S355JO to BS EN 10025 (as per availability) shall be by Contractor.
Item No: 7.01 Supplying, fabricating, blasting, painting, erecting and aligning of STRUCTURAL STEEL including semi built-up sections as per drawing including tools, tackles,cutting, welding, consumables, assembly, bolts,permanent bolts of grade 8.8 (galvanized turned & fitted bolts), preparation of fabrication drawings for all types of structures in buildings, pipe racks, platforms and towers or any other structure as specified by Client / tkIS India. Note: 1. Rate shall include 3D model developed in TEKLA by contractor for preparation of fabrication drawings for Steel Structures. 2. Fabrication to be done in fabrication shop established by contractor or vendor approved by Client /tkIS India. 3.Rate shall be inclusive of transportation, unloading, storage, handling, preservation of fabrication items from the Workshop to site. 4.Contractor shall submit a detailed methodology for erection of structural steel for approval by Client /tkIS India before commencement of erection. 5. Rate shall be inclusive of a) blast cleaning with compressed air and blasting gun conforming to swedish standard SA 2½. including all tools and tackles, compressor, etc. b) Providing and applying epoxy painting system on steel surfaces consisting of one primer coat of Zinc Dust/ Ethyl Silicate Primer as per SSPC Paint 20 Level 2 / 1 x 75 m DFT (80% zinc on dry film) %Volume Solid : Min 65,Zinc should be min 1.4 kg/ litre. The product to be supplied with ASTM D520 Type II zinc dust. one intermediate coat of Epoxy Polyamide Intermediate coat with Lamellar Micaceous Iron Oxide - Min VS 80% / 1 x 120 m DFT and one final coat of Inert Pigment / Acrylic Aliphatic PU paint with 80% gloss retention on exposure to 1000 hrs of QUV B 313 / 1 x 60 m DFT; % Volume Solid : 58+/- 2, Gloss of min. 80 units @60 o gloss head ; including all tools, tackles, scaffolding all complete
Item No: 7.01a All activities of scope same as 7.01However Work for pipe rack R01M
Item No: 7.03 All activities of scope same as 7.01 but for plate girder type members including providing gigs & fixtures to prevent deform action and undue thermal stress during welding.
Item No: 7.07 All activities and scope same as 7.01 but for Cold roll formed galvanised steel sections like Z - Lip , C - lip channel.
Item No: 7.16 Supplying, fabricating and fixing at various elevations Galvanized Electro-forged gratings including clamps and fittings etc. complete; as per drawing including tools, tackles,cutting, welding, consumables, grade 8.8 bolts, preparation of fabrication drawings for all types of structures in buildings, pipe racks, platforms and towers or any other structure as specified by Client / tkIS India. Thickness as per drawing
Item No: 7.17 All activities and scope same as 7.16 but for 6/7 mm thick Galvanized Chequered Plates with or without stiffeners and as per drawing.
Item No: 7.22 All activities and scope same as 7.01 but for Hand railing as per tkIS India standard drawing no. PIN-LEPCVS-1023 consisting of top rail, mid rail, toe guard, vertical post, etc.
Item No: 7.30 Addition of new cut outs in fabricated / erected Grating to suit site requirement, including cutting,welding,supply and fixing kick plate around openings as per drawing,clamping (including touch up galvanisation).
Item No: 7.31 Addition of new cut outs in fabricated / erected Chequered plates to suit site requirement, including cutting, welding,supply and fixing kick plate around openings as per drawing,clamping (including touch up galvanisation).
Item No: 7.32 All activities and scope same as 7.01 but for fixing and connecting additional structures to already erected steel structure at different levels as per drawing including tools , tackles, scaffolding, drilling of holes in already erected structures for bolted connections, welding etc. all complete as specified by Client/ tkIS India.
Section 1 MECHANICAL & PIPING WORKS (Scope to be read in conjuction with WORK ITEM DESCRIPTION ANNEXURE I (SP1A)
Item No: 1 Installation of Static Equipments
Item No: 1.1 Installation of static equipment supplied in single piece
Item No: 1.1.1 Installation of equipments weights up to 50 Tons
Item No 1.6 Installation of Rotary equipment pumps,agitators etc.
Item No: 1.6.1 Installation of Rotary equipments
Item No: 1.7 Supply and application of grouting material for Static/Rotary/Package equipments
Item No: 1.11 Grouting with Fosroc conbextra GP2 or equivalent.
Item No: 1.12 Grouting of Equipment with M 40 Concrete (cement:sand: grit-1:1:1)
Section: 2 ABOVE GROUND PIPING WORKS
Item No:2.1 Fabrication and Installation of A/G piping works.
Item No: 2.1.1 Carbon steel pipe Non IBR - All grade and specifications including (NACE,H2services)
Item No: 2.1.1.1 Carbon steel piping Non IBR - All grade and specifications including (NACE,H2services): Welding at (Shop)
Item No: 2.1.1.1.2 Butt Weld Upto 10mm Thk
Item No: 2.1.1.1.3 Butt Weld > 10 mm thk and up to 20 mm thk
Item No: 2.1.1.2 Carbon steel piping Non IBR - All grade and specifications including (NACE,H2services): Welding (Field / Position)
Item No: Item No: 2.1.1.2.1 Socket Weld - For All Thickness
Item No: 2.1.1.2.2 Butt Weld Upto 10mm Thk
Item No: 2.1.1.2.3 Butt Weld > 10 mm thk and up to 20 mm thk
Item No: 2.1.1.2.4 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No: 2.1.2 Carbon steel pipe IBR - All grade and specifications
Item No: 2.1.2.1 Carbon steel pipe IBR - All grade and specifications: Welding at (Shop)
Item No: 2.1.2.1.2 Butt Weld Upto 10mm Thk
Item No: 2.1.2.1.3 Butt Weld > 10 mm thk and up to 20 mm thk
Item No: 2.1.2.2 Carbon steel pipe IBR - All grade and specifications: Welding at (Field / Position)
Item No: 2.1.2.2.1 Socket Weld - For All Thickness
Item No: 2.1.2.2.2 Butt Weld Upto 10mm Thk
Item No: 2.1.2.2.3 Butt Weld > 10 mm thk and up to 20 mm thk
Item No: 2.1.2.2.4 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No: 2.1.3 Carbon steel pipe - Galvanized
Item No: 2.1.3.1 Carbon steel pipe - Galvanized: Welding at (Shop)
Item No: 2.1.3.1.2 Butt Weld Upto 10mm Thk
Item No: 2.1.3.2 Welding (Field / Position)
Item No: 2.1.3.2.1 Butt Weld Upto 10mm Thk Small Bore
Item No: 2.1.3.2.3 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No: 2.1.7 Stainless steel /Inconnel steel / Duplex pipe Non IBR- All grade and specifications including (NACE,H2 services)
Item No: 2.1.7.1 Stainless steel /Inconnel steel / Duplex pipe Non IBR- All grade and specifications including (NACE,H2 services): Welding at (Shop)
Item No: 2.1.7.1.1 Butt Weld Upto 10mm Thk
Item No: 2.1.7.2 Stainless steel /Inconnel steel / Duplex pipe Non IBR- All grade and specifications including (NACE,H2 services): Welding (Field / Position)
Item No: 2.1.7.2.1 Socket Weld - For All Thickness
Item No: 2.1.7.2.2 Butt Weld Upto 10mm Thk Small Bore
Item No: 2.1.7.2.4 Erection, Alignment, Supporting, Providing identification band, Flushing, Pressure Testing, Drying, pre-commissioning activities etc,
Item No: 2.2 ERECTION OF VALVES
Item No: 2.2.1 Erection of Flanged /welded valves/strainers/bellows (Except TSV/PSV & Control Valve) of all ratings
Item No: 2.2.1.1.1 Size - upto 1 inch NB
Item No: 2.2.1.1.2 Size - 2 inch NB
Item No: 2.2.1.1.3 Size - 3 inch NB
Item No: 2.2.1.1.4 Size - 4 inch NB
Item No: 2.2.1.1.5 Size - 6 inch NB
Item No: 2.2.1.1.6 Size - 8 inch NB
Item No: 2.2.1.1.7 Size - 10 inch NB
Item No: 2.2.1.1.8 Size - 12 inch NB
Item No: 2.2.1.1.9 Size - 14 inch NB
Item No: 2.2.1.1.10 Size - 16 inch NB
Item No: 2.2.1.1.11 Size - 18 inch NB
Item No: 2.2.1.1.12 Size - 20 inch NB
Item No: 2.2.1.1.13 Size - 24 inch NB
Item No: 2.2.1.1.14 Size - 28 inch NB
Item No: 2.2.1.1.15 Size - 30 inch NB
Item No: 2.2.1.1.16 Size - 32 inch NB
Item No: 2.2.1.1.17 Size - 36 inch NB
Item No: 2.2.1.1.18 Size - 40 inch NB
Item No: 2.2.2 Erection of Flanged /welded/Sandwiched Pressure Safery valves/ Temperature Safety Valve of all ratings
Item No: 2.2.2.1 Size - 6 inch NB
Item No: 2.2.2.2 Size - 8 inch NB
Item No: 2.2.2.3 Size - 10 inch NB
Item No: 2.2.3 Erection of Flanged /welded/Sandwiched Control valves of all ratings with actuators and volume bottles
Item No: 2.2.3.1 Size - 0.5 inch NB
Item No: 2.2.3.2 Size - 0.75 inch NB
Item No: 2.2.3.3 Size - 1 inch NB
Item No: 2.2.3.4 Size - 1.5 inch NB
Item No: 2.2.3.5 Size - 2 inch NB
Item No: 2.2.3.6 Size - 3 inch NB
Item No: 2.2.3.7 Size - 4 inch NB
Item No: 2.2.3.8 Size - 6 inch NB
Item No: 2.2.3.9 Size - 8 inch NB
Section: 3 NON DESTRUCTIVE TEST
Item No: 3.1 Carry out non destructive testing and Post weld heat tretement work as per specification and instruction of engineer in charge
Item No: 3.1.1 Radiography test
Item No: 3.1.1.1. Carrying out Radiography Test -Thickness (By -X-ray or gamma ray or Selinium 75) for sizes up to 2" by eliptical shot
Item No: 3.1.1.2. Carrying out Radiography Test -By -Gamma Ray for sizes above 2"
Item No: 3.1.2 Ultrasonic test
Item No: 3.1.2.1 Carrying out DP Test - All thickness
Item No: 3.1.3 Magnetic particle test
Item No: 3.1.3.1 Carrying out Magnetic particle test including hardness test.
Item No: 3.1.4 Dye penetrant test
Item No: 3.1.5 Post weld heat treatment (PWHT)
Item No: 3.1.6 PMI of Piping/ Project Materials
Section: 4 CHEMICAL CLEANING/PASSIVATION WORK
Item No: 4.1 Degreasing and chemical cleaning inclusive of rinsing, preservation, neutralization, drying etc for Piping,equipments as per specification
Item No: 4.1.1 Degreasing/Chemical Cleaning/Passivations of Piping
Section: 5 STEAM TRACING WORK
Item No: 5.1 Fabrication,Erection, alignment,welding ,blasting and painting of Steam Tracing of Pipe Lines installation of supply & return manifolds as per drawings and specification
Item No: 5.1.1 Carbon steel Size - 15 mm, Nominal Dia
Section: 6 PIPE SUPPORT WORKS
Item No: 6.1 Supply, Fabrication, Erection, Shotblasting, Painting (System-1) of carbon steel/Stainless steel secondary /special Pipe Supports as per Technical Specs.
Item No: 6.1.1 Supply, fabrication,Erection,alignment,welding, site adjustment,bolting etc. of Carbon Steel secondary supports /special supports
Item No: 6.1.2 Supply, fabrication,Erection,alignment,welding,site adjustment,bolting etc. of Stainless Steel secondary supports /special supports
Section: 7 SURFACE PREPARATION & PAINTING WORKS
Item No: 7.7.1 Item description is same as above but for Lettering
Item No: 7.7.1.1 Letter Size-10mm
Item No: 7.7.1.2 Letter Size-20mm
Item No: 7.7.1.3 Letter Size-30mm
Item No: 7.7.1.4 Letter Size-50mm
Item No: 7.7.1.5 Letter Size-100 mm
Item No: 7.7.1.6 Letter Size-300 mm
Item No: 7.7.2 Item description is same as in sl. No. 157 but for arrow marking. Measurement of arrow length shall be (L= L1+L2). L1, L2 & W1 are as indicated in painting specification.
Item No: 7.7.2.1 Width of arrow (W1) - 3mm
Item No: 7.7.2.2 Width of arrow (W1) - 5 mm
Item No: 7.7.2.3 Width of arrow (W1) - 10 mm
Item No: 7.7.2.4 Width of arrow (W1) - 15 mm
Item No: 7.7.2.5 Width of arrow (W1) - 30 mm
Item No: 7.7.2.6 Width of arrow (W1) - 50 mm
Item No: 7.7.2.7 Width of arrow (W1) - 80 mm
Item No: 7.7.2.8 Width of arrow (W1) - 100 mm
Section : 8 STRUCTURAL WORKS FOR EQUIPMENT PLATFORM
Item No: 8.1 Supply, fabrication , erection including blasting ,painting of structural steel and chequerd plate for equipment platform (Circular or rectangular) & Approach ladder for equipment plateform, Liner plate for equipment etc.
Item No: 8.2 Supply, fabrication & erection including blasting, painting of structural steel and chequerd plate for stairway, structural work for tower monitor, walkway platform, valve operating platform, intermediate member required for piping support , providing member for supporting the valves , approach ladders etc..
Item No: 8.3 Erection of prefabricated structural steel supplied by others.
Item No: 8.4 Supply , Fabrication and Erection of electroforged galvanised grating 30 mm Thk ( Weight approx. 40 kg/m2)
Item No: 8.5 Supply , fabrication and erection including blasting painting of hand rails on equipment platforms, technological structures etc.as per specification and drawings
Item No: 8.6 Supply , fabrication and erection including blasting painting of Chequered plate as per specification and drawings
Item No: 8.7 Supply, fabrication, erection, alignment, welding, testing, site adjustment, bolting etc. of structural materials (including MS hollow pipes, MS plates, MS bars, rails, wheels, etc. ) for Caustic Wagon unloading Arm as per drawing and specifications; at all locations and elevations and completing the work in all respect as per instructions of the Engineer-in-Charge. Rate shall be inclusive of blast cleaning and painting as per System 1 of Painting Specifications. Scope also includes engaging of all necessary skilled manpower, PPEs, lifting equipment, supplying all consumables, tools and tackles, crane/hydra, providing scaffolding at all levels/elevations, all types and sizes of HT bolts, nuts and washers including U-Bolts.
Section: 10 DISMANTLING WORKS DURING SHUTDOWN & NON SHUTDOWN PERIOD.
Item No: 10.1 Dismantling and rerection of erected steel structures, ladders, platforms, handrails, etc. to facilitate equipment and piping erection
Item No: 10.2 Dismantling and removal of existing reusable/ redundant equipment to facilitate erection of new equipment at all elevation and locations
Item No: 10.2.1 Dismantling of equipment weights up to 50 Tons
Item No: 10.3 Dismantling and removal of above ground piping of all sizes, all materials & thickness by hot work (Insulated /uninsulated)
Item No: 10.3.1 For the work up to height 6 meters elevation (CS/AS/LTCS/SS)
Item No: 10.3.2 Height more than 6 meters but less than 12 meters elevation (CS/AS/LTCS/SS)
Item No: 10.3.3 Height more than 12 meters but less than 24 meters elevation (CS/AS/LTCS/SS)
Item No: 10.3.4 Height more than 24 meters and above (CS/AS/LTCS/SS)
Item No: 10.3.5 Dismantling of existing under ground piping of all size and thickness by removal of connecting support, pedestral etc for all type of pipe material,size and thickness
Item No: 10.3.6 Dismantling/chipping of existing concrete pavement/ foundations/Grouting/fire proofing etc. by using power tools, removal/ disposal/ cleaning / transportation of debris to location as decided by engineer in charge with in refinery premises to facilitate construction of new installation.
Item No: 10.3.7 Dismantling existing concrete pavement at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No: 10.3.8 Dismantling existing grout at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in- charge.
Item No: 10.3.9 Dismantling of existing Fireproofing at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No: 10.3.10 Dismantling of existing PLAIN CEMENT CONCRETE work at all levels including all tools, tackles, compressed air, labour, consumables and disposal of debris as directed by Engineer-in-charge.
Item No: 10.5 Dismantling and transportation of existing Valves /Control valves/Safety valves at all location & elevation as decided by engineer in charge with in refinery premises to facilitate construction of new installation
Item No: 10.5.1 All type and rating of flanged / welded valves
Item No: 10.5.2 All types and rating of control valves with actuator and volume bottles
Item No: 10.5.3 All types and rating of safety valves
Item No: 10.5.4 Removal of existing insulation including dismantling of cladding etc irrespective of its type of any thickness from equipment, piping, valves, inline instruments at all height by providing tools tackles, manpower, consumables, scaffolding as per requirement, and clearing the area by shifting / transportation of the removed insulation materials to identified area by Client
Section: 11 MODIFICATION WORKS
Item No: 11.1 Modification and reinstallation of existing steel structures, platforms, ladders, gratings etc. as per instruction of engineer in charge.
Item No: 11.2 Carbon Steel Piping-All grades (Non IBR) up to 12.7 mm thk
Item No: 11.2.1 Cutting (Up to Pipe thickness 20 mm)
Item No: 11.2.2 Grinding/Edge prpeparation/Bevelling/Fit Up/Welding (Up to Pipe thickness 20 mm)
Item No: 11.2.3 Erection/Supporting/punch listing/dilution of punch list (All thickness)
Item No: 11.2.4 Hydrotesting/Flushing/Reinstatement/documentation (All thickness)
Item No: 11.3 Carbon Steel Piping-All grades ( IBR)
Item No: 11.3.1 Cutting (Up to Pipe thickness 20 mm)
Item No: 11.3.2 Grinding/Edge prpeparation/Bevelling/Fit Up/Welding (Up to Pipe thickness 20 mm)
Item No: 11.3.3 Erection/Supporting/punch listing/dilution of punch list (All thickness)
Item No: 11.3.4 Hydrotesting/Flushing/Reinstatement/documentation (All thickness)
Item No: 11.4 Stainless Steel -All grades (NIBR)
Item No: 11.4.1 Cutting (Up to Pipe thickness 20 mm)
Item No: 11.4.2 Grinding/Edge prpeparation/Bevelling/Fit Up/Welding (Up to Pipe thickness 20 mm)
Item No: 11.4.3 Erection/Supporting/punch listing/dilution of punch list (All thickness)
Item No: 11.4.4 Hydrotesting/Flushing/Reinstatement/documentation (All thickness)
Section: 13 ANCHOR FASTENERS WORKS
Item No: 13.1 Supply,drilling and fixing of mechanical /Chemical expansion anchor fastener of required size and length (Hilti or equivalant make)
Item No: 13.1.1 Chemical Anchor Fasteners-Supply & Fixing
Item No: 13.1.1.1 M12 X 150 mm
Item No: 13.1.1.2 M12 X 165mm
Item No: 13.1.1.3 M12 X 185 mm
Item No: 13.1.1.4 M16 X 220 mm
Item No: 13.1.1.5 M20 X 170 mm
Item No: 13.1.1.6 M20 X 250 mm
Item No: 13.1.1.7 M20 X 260 mm
Item No: 13.1.1.8 M20 X300 mm
Item No: 13.1.1.9 M24 X450 mm
Item No: 13.1.2 Mechanical Anchor Fasteners-Supply & Fixing
Item No: 13.1.2.1 M10 X 110 mm
Item No: 13.1.2.2 M10 X 105 mm
Item No: 13.1.2.3 M10 X 120 mm
Item No: 13.1.2.4 M12 X 110 mm
Item No: 13.1.2.5 M12 X 120 mm
Item No: 13.1.2.6 M12 X 145 mm
Item No: 13.1.2.7 M12 X 185 mm
Item No: 13.1.2.8 M16 X 115 mm
Item No: 13.1.2.9 M16 X 125 mm
Item No: 13.1.2.10 M16 X 145 mm
Item No: 13.1.2.11 M16 X 150 mm
Item No: 13.1.2.12 M16 X 165 mm
Item No: 13.1.2.13 M16 X 220 mm
Item No: 13.1.2.14 M20 X 50 mm
Item No: 13.1.2.15 M20 X 170 mm
Item No: 13.1.2.16 M20 X 180 mm
Item No: 13.1.2.17 M20 X 220 mm
Item No: 13.1.2.18 M20 X 260 mm
Item No: 13.1.2.19 M24 X 385 mm
Section: 18 TIE IN WORKS DURING SHUT DOWN
Item No: 18.1 Prefabrication of piping spools
Item No: 18.1.1 Fabrication of piping spools for for all type of materials and thickness for pipelines required for Tie in connection. .
Item No: 18.1.1.1 CS up to 10 mm thk (IBR/NBR)
Item No: 18.1.1.2 CS up to 11 mm to 20 MM thk (IBR/NBR)
Item No: 18.3 Carry out Mechanical Tie in works for pipelines at all location and elevation as per drawing involving cutting , welding and NDT works
Item No: 18.3.1 For tapping size up to 2"
Item No: 18.3.2 For tapping size from 3" to 10"
Item No: 18.3.3 For tapping size from 12" to 18"
Section: 20 To be Read in conjuction with Secction 1.0, WORK ITEM DESCRIPTION, ANNEXURE II (SP1B) INSULATION OF ABOVE GROUND PIPING INCLUDING SUPPLY.
Item No: 20.1 INSULATION ON THE EQUIPMENT AS PER PROJECT SPECIFICATION
Item No: 20.1.1 IH- Hot Insulation, Thickness:
Item No: 20.1.1.1 IH- Hot Insulation, Thickness: 30mm
Item No: 20.1.1.2 IH- Hot Insulation, Thickness: 40 mm
Item No: 20.1.1.3 IH- Hot Insulation, Thickness: 50 mm
Item No: 20.1.1.4 IH- Hot Insulation, Thickness: 60 mm
Item No: 20.1.1.5 IH- Hot Insulation, Thickness: 70 mm
Item No: 20.1.1.6 IH- Hot Insulation, Thickness: 75 mm
Item No: 20.1.1.7 IH- Hot Insulation, Thickness: 100 mm
Item No: 20.1.2 Insulation Type : PP - Personnel Protection
Item No: 20.1.2.1 PP - Personnel Protection, Thickness: 30 mm
Section: 21 To be Read in conjuction with Secction 1.2, WORK ITEM DESCRIPTION, ANNEXURE II (SP1B) INSULATION OF ABOVE GROUND PIPING AS PER PROJECT SPECIFICATION
Item No: 21.1 IH- Hot Insulation
Item No: 21.1-a IH- Hot Insulation, Thickness: 30 mm, Size: 20 mm
Item No: 21.1.2 IH- Hot Insulation, Thickness: 30 mm, Size: 25 mm
Item No: 21.1.3 IH- Hot Insulation, Thickness: 30 mm, Size: 50 mm
Item No: 21.1.4 IH- Hot Insulation, Thickness: 30 mm, Size: 80 mm
Item No: 21.1.5 IH- Hot Insulation, Thickness: 30 mm, Size: 100 mm
Item No: 21.1.6 IH- Hot Insulation, Thickness: 50 mm, Size: 15 mm
Item No: 21.1.7 IH- Hot Insulation, Thickness: 50 mm, Size: 20 mm
Item No: 21.1.8 IH- Hot Insulation, Thickness: 50 mm, Size: 25 mm
Item No: 21.1.9 IH- Hot Insulation, Thickness: 50 mm, Size: 40 mm
Item No: 21.1.10 IH- Hot Insulation, Thickness: 50 mm, Size: 50 mm
Item No: 21.1.11 IH- Hot Insulation, Thickness: 50 mm, Size: 80 mm
Item No: 21.1.12 IH- Hot Insulation, Thickness: 50 mm, Size: 100 mm
Item No: 21.1.13 IH- Hot Insulation, Thickness: 50 mm, Size: 150 mm
Item No: 21.1.14 IH- Hot Insulation, Thickness: 50 mm, Size: 200 mm
Item No: 21.1.15 IH- Hot Insulation, Thickness: 50 mm, Size: 250 mm
Item No: 21.1.16 IH- Hot Insulation, Thickness: 50 mm, Size: 300 mm
Item No: 21.1.17 IH- Hot Insulation, Thickness: 50 mm, Size: 350 mm
Item No: 21.1.18 IH- Hot Insulation, Thickness: 50 mm, Size: 400 mm
Item No: 21.1.19 IH- Hot Insulation, Thickness: 50 mm, Size: 450 mm
Item No: 21.1.20 IH- Hot Insulation, Thickness: 50 mm, Size: 500 mm
Item No: 21.1.21 IH- Hot Insulation, Thickness: 50 mm, Size: 600 mm
Item No: 21.1.22 IH- Hot Insulation, Thickness: 75 mm, Size: 15 mm
Item No: 21.1.23 IH- Hot Insulation, Thickness: 75 mm, Size: 25 mm
Item No: 21.1.24 IH- Hot Insulation, Thickness: 75 mm, Size: 40 mm
Item No: 21.1.25 IH- Hot Insulation, Thickness: 75 mm, Size: 50 mm
Item No: 21.1.26 IH- Hot Insulation, Thickness: 75 mm, Size: 80 mm
Item No: 21.1.27 IH- Hot Insulation, Thickness: 75 mm, Size: 100 mm
Item No: 21.1.28 IH- Hot Insulation, Thickness: 75 mm, Size: 150 mm
Item No: 21.1.29 IH- Hot Insulation, Thickness: 75 mm, Size: 200 mm
Item No: 21.1.30 IH- Hot Insulation, Thickness: 75 mm, Size: 250 mm
Item No: 21.1.31 IH- Hot Insulation, Thickness: 75 mm, Size: 300 mm
Item No: 21.1.32 IH- Hot Insulation, Thickness: 75 mm, Size: 350 mm
Item No: 21.1.33 IH- Hot Insulation, Thickness: 75 mm, Size: 400 mm
Item No: 21.1.34 IH- Hot Insulation, Thickness: 75 mm, Size: 450 mm
Item No: 21.1.35 IH- Hot Insulation, Thickness: 75 mm, Size: 500 mm
Item No: 21.1.36 IH- Hot Insulation, Thickness: 75 mm, Size: 600 mm
Item No: 21.1.37 IH- Hot Insulation, Thickness: 75 mm, Size: 700 mm
Item No: 21.1.38 IH- Hot Insulation, Thickness: 75 mm, Size: 750 mm
Item No: 21.3 Insulation Type : PP - Personnel Protection
Item No: 21.3.1 PP - Personnel Protection Thickness: 30 mm, Size: 20 mm
Item No: 21.3.2 PP - Personnel Protection Thickness: 30 mm, Size: 25 mm
Item No: 21.3.3 PP - Personnel Protection Thickness: 30 mm, Size: 50 mm
Item No: 21.3.4 PP - Personnel Protection Thickness: 30 mm, Size: 80 mm
Item No: 21.3.5 PP - Personnel Protection Thickness: 30 mm, Size: 100 mm
Item No: 21.3.6 PP - Personnel Protection Thickness: 30 mm, Size: 150 mm
Item No: 21.3.7 PP - Personnel Protection Thickness: 30 mm, Size: 200 mm
Item No: 21.3.8 PP - Personnel Protection Thickness: 30 mm, Size: 250 mm
Item No: 21.3.9 PP - Personnel Protection Thickness: 30 mm, Size: 300 mm
Item No: 21.3.10 PP - Personnel Protection Thickness: 30 mm, Size: 350 mm
Item No: 21.3.11 PP - Personnel Protection Thickness: 30 mm, Size: 400 mm
Item No: 21.3.12 PP - Personnel Protection Thickness: 30 mm, Size: 450 mm
Item No: 21.3.13 PP - Personnel Protection Thickness: 30 mm, Size: 500 mm
Item No: 21.3.14 PP - Personnel Protection Thickness: 30 mm, Size: 600 mm
Item No: 21.3.15 PP - Personnel Protection Thickness: 30 mm, Size: 750 mm
Item No: 21.3.16 PP - Personnel Protection Thickness: 30 mm, Size: 900 mm
Item No: 21.3.17 PP - Personnel Protection Thickness: 30 mm, Size: 1050 mm
Item No: 21.3.18 PP - Personnel Protection Thickness: 30 mm, Size: 1200 mm
Item No: 21.3.19 PP - Personnel Protection Thickness: 30 mm, Size: 1350 mm
Section: 22 To be Read in conjuction with Secction 1.3, WORK ITEM DESCRIPTION, ANNEXURE II (SP1B) INSULATION OF ABOVE GROUND VALVES AS PER PROJECT SPECIFICATION
Item No: 22.1 Insulation Type : IH- Hot Insulation
Item No: 22.1.6 IH- Hot Insulation, Thickness: 30 mm, Size: 20 mm
Item No: 22.1.7 IH- Hot Insulation, Thickness: 30 mm, Size: 25 mm
Item No: 22.1.8 IH- Hot Insulation, Thickness: 30 mm, Size: 50 mm
Item No: 22.1.13 IH- Hot Insulation, Thickness: 30 mm, Size: 80 mm
Item No: 22.1.14 IH- Hot Insulation, Thickness: 30 mm, Size: 100 mm
Item No: 22.1.15 IH- Hot Insulation, Thickness: 50 mm, Size: 15 mm
Item No: 22.1.16 IH- Hot Insulation, Thickness: 50 mm, Size: 20 mm
Item No: 22.1.17 IH- Hot Insulation, Thickness: 50 mm, Size: 25 mm
Item No: 22.1.18 IH- Hot Insulation, Thickness: 50 mm, Size: 40 mm
Item No: 22.1.23 IH- Hot Insulation, Thickness: 50 mm, Size: 50 mm
Item No: 22.1.24 IH- Hot Insulation, Thickness: 50 mm, Size: 80 mm
Item No: 22.1.25 IH- Hot Insulation, Thickness: 50 mm, Size: 100 mm
Item No: 22.1.26 IH- Hot Insulation, Thickness: 50 mm, Size: 150 mm
Item No: 22.1.27 IH- Hot Insulation, Thickness: 50 mm, Size: 200 mm
Item No: 22.1.28 IH- Hot Insulation, Thickness: 50 mm, Size: 200 mm
Item No: 22.1.29 IH- Hot Insulation, Thickness: 50 mm, Size: 300 mm
Item No: 22.1.30 IH- Hot Insulation, Thickness: 50 mm, Size: 350 mm
Item No: 22.1.31 IH- Hot Insulation, Thickness: 50 mm, Size: 400 mm
Item No: 22.1.32 IH- Hot Insulation, Thickness: 50 mm, Size: 450 mm
Item No: 22.1.35 IH- Hot Insulation, Thickness: 50 mm, Size: 500 mm
Item No: 22.1.36 IH- Hot Insulation, Thickness: 50 mm, Size: 600 mm
Item No: 22.1.37 IH- Hot Insulation, Thickness: 75 mm, Size: 15 mm
Item No: 22.1.38 IH- Hot Insulation, Thickness: 75 mm, Size: 25 mm
Item No: 22.1.39 IH- Hot Insulation, Thickness: 75 mm, Size: 50 mm
Item No: 22.1.40 IH- Hot Insulation, Thickness: 75 mm, Size: 80 mm
Item No: 22.1.43 IH- Hot Insulation, Thickness: 75 mm, Size: 100 mm
Item No: 22.1.44 IH- Hot Insulation, Thickness: 75 mm, Size: 150 mm
Item No: 22.1.45 IH- Hot Insulation, Thickness: 75 mm, Size: 200 mm
Item No: 22.1.46 IH- Hot Insulation, Thickness: 75 mm, Size: 250 mm
Item No: 22.1.47 IH- Hot Insulation, Thickness: 75 mm, Size: 300 mm
Item No: 22.1.48 IH- Hot Insulation, Thickness: 75 mm, Size: 350 mm
Item No: 22.1.49 IH- Hot Insulation, Thickness: 75 mm, Size: 400 mm
Item No: 22.1.50 IH- Hot Insulation, Thickness: 75 mm, Size: 450 mm
Item No: 22.1.51 IH- Hot Insulation, Thickness: 75 mm, Size: 500 mm
Item No: 22.1.52 IH- Hot Insulation, Thickness: 75 mm, Size: 600 mm
Item No: 22.1.53 IH- Hot Insulation, Thickness: 75 mm, Size: 750 mm
SRC INFRA COMPANY PVT.LTD (BID ID -3214591)
zetwerk manufacturing bussinesses Private Limited (BID ID -3214405)
Amara Raja Infra Private Limited (BID ID -3213475)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid