Construction work of 132 kV S/C Jobner- Bagru Rwan line overhead line (25KM) and underground cable (1.5KM)

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anti Climbing Device etc.

Gavvanised Steel Tower

DISC INSULATORS 70 KN (B&S)

DISC INSULATORS 120KN (B&S)

SINGLE TENSION

P.A. ROD

VIBRATION DAMPER

G.I. Step Bolt

Under Ground Cable portion

1X48 Fiber Fiber optic Cable and associated accessories/items as per specification

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) 1. Bidders are requested to Refer Volume-I (Condition of Contracts) for filling of taxes and duties as per applicability. 2. Bidders are requested to refer to respective section / clauses for detailed technical specification for items/ works.

NUMBER #

(i) Any soil,soft rock other than hard rock

(A) Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming and watering as per specification.

(ii) 1:3:6 Mix

(iv) 1:1:5:3 Mix

EARTHING:

(i) Erection of towers(with extensions upto 9 Meters)

CONDUCTOR STRINGING:- (A ) Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

RIVETMENT OF TOWERS:-

(B ) Random rubble stone masonary for rivetment in 1:5 cement sand mortar including providing and fixing 100mm dia PCC drain pipe & raised and cut-pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each deposited layer by ramming and watering.

UNDER GROUND CABLE

CABLE INSTALLATION

Survey of cable route, excavation of trial holes as per field requirement, preparation of cable route profile, drawing for cable laying, final route alignment, making lines & grades, preparation of final cable route drawing after approval & preparing bill of materials for complete route shown in the drawing i.e. between terminal tower

Establishing of 3-Phase double ckt. having (3-Phase), 132 KV, Single Phase 500 sqmm copper cable in trefoil formation alongwith pilot fiber cable, providing of Warning tape tagging, fixing, pipe for drain & gate crossing as per drawing and specification in trench by pulling, drawing etc. including cables, using standard cable installation equipment s in trench by pulling, drawing etc. including cable, using standard cable installation equipment and as per direction of the engineer in charge and returning the unused items in store.

Installation of undergrounf optical fiber cable and associated accessories / items as per specification along with XLPE cable and termination at the both end.

CIVIL WORK

Earthwork in excavation for burried cable trenches /foundation including dressing of sides and ramming of bottoms, lift up to 2.5 Mtr. Including taking out the excavated soil & backfilling of jhiri with watering & ramming , timbering & shoring (Wherever required) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing dander board/diversion board, lighting reflectors etc.

Poviding and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.)

Centering & shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of form work for superstructure up to 4.5 Mtrs height above plinth level for 9For equipment foundation, junction box etc.)

Providing & Fixing of reinforcement Ferro Cement Cable Trench Covers designed for "A" & "AA" loading duly marked on cover with adequate reinforcement having thickness 75mm to 100 mm anti corrosive bitumen painted MS plate Rim and MS lifting hooks admixtures like plasticizer bond- improving compound, shrinkage resistance compound abrasion resistant complete as per approved design (for cable joint box) (For any span)

(i) 250 mm dia (For double circuit each circuit with 3 Cable cores)

(ii) HDPE PLB Duct for optical fiber Cable

Supply and Laying inter locking RCC cable covers as per approved drawing

RR ston masonary in F/P CSM 1:4