Modification of room T31 technology block 3rd Floor CSIO

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm. Make:- Classic or equivalent.

Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm. Make:- Classic or equivalent.

Providing and fixing aluminium casement stays, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Make:- Classic or equivalent.

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. Male:- Asian Paint/Dulux/Nerolac

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make:- J.K. Wall Putty/Birla White Putty/Asian Paint Wall Putty

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Make:- Asian Paint/Dulux/Nerolac

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within CSIO as per direction of Engineer-in-charge : In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within CSIO : Of area beyond 3 sq. metres

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-incharge, beyond CSIO initial lead, for all leads including all lifts involved.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red : Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. Make Novopan/action tesa

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): with float glass panes of 5mm thickness (weight not less than 12.50 kg/sqm) Make saint Gobin/modi guard

P/f sun control film

Modification of False Ceiling works with all necessary tools,runners, hangers,tees, angles,screws etc. for petty works which otherwise can not be mearsured all complete as directed by Engineer in carge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group-C)

Wiring for circuit/ submain wiring alongwith earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with 2X4 sq mm + 1X4 sq mm earth wire PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

Supplying and drawing of 3 x 2.5 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 5 x 2.5 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 3 x 4 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 3 x 6 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying of 1x16 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable as required.

Supplying and fixing 3 Modules (100mmX75mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing of U-PVC adaptable trunking system of size 100mm X 50mm complete with trunking cover etc. for housing the electrical modular box for fixing modular switch sockets, telephone socket etc, on the wall/tables/pillars etc. as required.

Supply and fixing of PVC 6 module conversation frame for CMS trunking with cover plate and blanking plate suitable for fixing in 100mmx50mm DLP U-PVC trunking for fixing the modular switch and socket 5amp./15amp. Complete as required at site.

Supply and fixing of RJ45 CAT6 Computer Jack with PVC modular box , base and cover plate suitable for fixing in 100mm x 50mm U-PVC trunking complete as required at site.

Supplying and fixing 5/6 A modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Note: Suitable for fixing on PVC modular box for PVC trunking)

Supplying and fixing modular 3 pin 5/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Note: Suitable for fixing on PVC modular box for PVC trunking)

Supplying and fixing 15/16 A modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Note: Suitable for fixing on PVC modular box for PVC trunking)

Supplying and fixing modular 6 pin 15/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Note: Suitable for fixing on PVC modular box for PVC trunking)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

畓灰祬湩⁧湡⁤楆楸杮戠慲獳戠瑡整⽮湡汧⁥潨摬牥椠据畬楤杮挠湯敮瑣潩獮攠捴‮獡爠煥極敲⹤Ń匀灵汰⁹…楦楸杮漠⁦畣楢慣祴数‬湩潤牯琠灹ⱥ猠湩汧⁥潤牯‬慷汬洠畯瑮摥‬楦數⁤祴数‬畤瑳瀠潲景㈠〰⁁‴瑳楲獰愠畬業楮浵戠獵戠牡洠摡⁥畯⁴景椠畳瑩扡敬匠敨瑥匠整汥䔠据潬畳敲搠汵⁹慰湩整⁤楷桴猠敩敭牧祡瀠睯敤⁲楷桴愠汬愠捣獥潳楲獥☠删扵敢⁲慇歳瑥攠捴‮獡爠煥極敲⹤传敶慲潂⁸楓敺⠠灁牰硯㨩⠠⥈㔴洵⁸在㌩〳浭砠⠠⥄㔱洰⹭IJ匀灵汰楹杮愠摮映硩湩⁧‶慷⁹‬潄扵敬搠潯Ⱳ猠湩汧

敢⁲汢摡獥‬楁⁲敤楬敶祲⠠業楮畭⥭ㄠ㐱‵㍭栯‬潬⁷潮獩⁥敬敶ⱬ猠極慴汢⁥潦⁲㌲嘰‬〵䠠ⱺ猠湩汧⁥桰獡⁥䍁匠灵汰ⱹ挠浯汰瑥⁥獡爠煥極敲⹤©ª˜匀灵汰楹杮漠⁦㔱‰浭猠敷灥‬汰獡楴⁣潂祤䔠桸畡瑳䘠湡椠据畬楤杮愠汬愠捣獥潳楲獥Ⱐ猠極慴汢⁥潦⁲㌲嘰‬〵䠠ⱺ猠湩汧⁥桰獡⁥䍁匠灵汰ⱹ挠浯汰瑥⁥獡爠煥極敲⹤ܠ湏⁥潊㩢楗楲杮†潦⁲氠杩瑨†潰湩⽴†慦瀠楯瑮 攠桸畡瑳†慦瀠楯瑮 挠污戠汥潰湩⁴眠瑩⁨ㄠ㔮†煳洮䘠䱒⁓倠䍖†湩畳慬整⁤挠灯数⁲挠湯畤瑣牯猠湩汧⁥†潣敲†挠扡敬†椠†畳晲捡⁥† †敲散獳摥†洠摥畩†汣獡⁳†噐⁃潣摮極ⱴ†楷桴†潭畤慬⁲猠楷捴ⱨ†潭畤慬⁲瀠慬整‬猠極慴汢⁥䜠⁉戠硯愠摮†慥瑲楨杮†桴⁥瀠楯瑮†楷桴†⸱‵猠⹱浭†剆卌†噐⁃椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲楳杮敬挠牯⁥慣汢⁥瑥⹣愠⁳敲畱物摥‮⠠䜠潲灵䌭 ††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††ã匀灵汰楹杮愠摮映硩湩⁧⼵‶⁁潭畤慬⁲睳瑩档 潳正瑥漠桴⁥硥獩楴杮洠摯汵牡瀠慬整☠猠楷捴⁨潢⁸湩汣摵湩⁧潣湮捥楴湯⁳畢⁴硥汣摵湩⁧潭畤慬⁲汰瑡⁥瑥⹣愠⁳敲畱物摥‮⠊潎整›畓瑩扡敬映牯映硩湩⁧湯倠䍖洠摯汵牡戠硯映牯倠䍖琠畲歮湩⥧ਊç匀灵汰楹杮愠摮映硩湩⁧潭畤慬⁲″楰⼵‶⁁潳正瑥漠瑵敬⁴湯琠敨攠楸瑳湩⁧潭畤慬⁲汰瑡⁥…睳瑩档戠硯椠据畬楤杮挠湯敮瑣潩獮戠瑵攠捸畬楤杮洠摯汵牡瀠慬整攠捴‮獡爠煥極敲⹤ਠ丨瑯㩥匠極慴汢⁥潦⁲楦楸杮漠噐⁃潭畤慬⁲潢⁸潦⁲噐⁃牴湵楫杮਩å匀灵汰楹杮愠摮映硩湩⁧㔱ㄯ‶⁁潭畤慬⁲睳瑩档 潳正瑥漠桴⁥硥獩楴杮洠摯汵牡瀠慬整☠猠楷捴⁨潢⁸湩汣摵湩⁧潣湮捥楴湯⁳畢⁴硥汣摵湩⁧潭畤慬⁲汰瑡⁥瑥⹣愠⁳敲畱物摥‮⠊潎整›畓瑩扡敬映牯映硩湩⁧湯倠䍖洠摯汵牡戠硯映牯倠䍖琠畲歮湩⥧ਊè匀灵汰楹杮愠摮映硩湩⁧潭畤慬⁲‶楰㔱㘯䄠猠捯敫⁴畯汴瑥漠桴⁥硥獩楴杮洠摯汵牡瀠慬整☠猠楷捴⁨潢⁸湩汣摵湩⁧潣湮捥楴湯⁳畢⁴硥汣摵湩⁧潭畤慬⁲汰瑡⁥瑥⹣愠⁳敲畱物摥‮⠊潎整›畓瑩扡敬映牯映硩湩⁧湯倠䍖洠摯汵牡戠硯映牯倠䍖琠畲歮湩⥧甊ĆLED Panel light 2x2 ft., 36watt (System lumen efficacy ≥105 <120 lm/Watt):- Supplying, installation, Testing & Commissioning of Panel light 2x2 ft. 36 watt, of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) Ć匀灵汰⁹景䴠瑥污楬⁣潂祤䔠桸畡瑳䘠湡漠⁦楳敺㌠〰洠睳敥Ɒ眠瑩⁨⹇⹉猠敨瑥氠畯敶⁲桳瑵整Ⱳ䜠敲⁹湩挠汯牯‬删䵐›〹ⴰ㔹ⰰ映畯⁲畮扭牥戠慬敤ⱳ䄠物搠汥癩牥⁹洨湩浩浵 ㄱ㔴洠⼳ⱨ氠睯渠楯敳氠癥汥‬畳瑩扡敬映牯㈠〳ⱖ㔠‰穈‬楳杮敬瀠慨敳䄠⁃畓灰祬‬潣灭敬整愠⁳敲畱物摥脮慎敭漠⁦潗歲›䴠摯晩捩瑡潩湩删潯潎‮ㄳⰱ吠捥湨汯杯⁹求捯爳⁤汦潯⁲瑡䌠䥓ⵒ千佉䌬慨摮杩牡⹨ ††††††††††††††††䥆敬丠㩯†䌠䥓⽏㔱㌷㈯㈰ⴵ㘲䔯䑓Ä倀潲楶楤杮愠摮映硩湩⁧灳捥慩畱污瑩⁹牢杩瑨映湩獩敨⁤牢獡⁳畣扰慯摲漠⁲慷摲爠扯⁥潬正⁳楷桴映畯⁲敬敶獲漠⁦灡牰癯摥焠慵楬祴椠据畬楤杮渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⹥㔠洰慍敫䜠摯敲牯攠畱癩污湥ﭴ牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵琠睯牥戠汯獴‬卉⁩慭歲摥‬湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸‸ 牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵漠⁲桳摡ⱥ眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整㨠〱砰〱洠慍敫ⴺ䌠慬獳捩漠⁲煥極慶敬瑮ࠂ䱅䍅剔䍉䱁††††††慌潢牵䌠慨杲獥映牯琠敨映汯潬楷杮䨠扯⁳湩汣摵湩⁧業潮⁲獡潳瑲摥洠瑡牥慩楬敫⁳污浵湩畩⽭潣灰牥琠楨扭敬ⱳ瀠捶琠灡獥‬慦瑳敮獲‬捳敲獷‬慷桳牥⁳瑥⹣愠⁳敲畱物摥琠潣灭敬整琠敨樠扯ⴺㄊ‮楄浳湡汴湩⁧景攠敬瑣楲慣挠扡敬⽳楷楲杮‬汥捥牴捩污†楬桧⁴潰湩獴‬慦潰湩獴‬偌倬ⱐ映瑩楴杮☠映硩牵獥攠捴‮牦浯删潯潎㌮ㄱ愠摮†湩汣摵湩⁧桳晩楴杮漠⁦慭整楲污映潲楳整琠瑳牯⁥獡爠煥極敲⁤…獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧ਮ⸲匠楨瑦湩⁧景琠敨䴠䍃ⵂ倴‬〲䄰ⴠ㄰丠⹯楷桴攠据潬畳敲漠桴⁥慳敭䴠⁓潢牡⁤湩汣摵湩⁧楤捳湯敮瑣潩湡⁤敲潣湮捥楴湯漠⁦楷敲⽳慣汢獥‮䔨摮琠牥業慮楴湯漠⁦牡潭牵摥瀠睯牥挠扡敬⁳楷桴戠慲獳朠慬摮琠敢瀠楡⁤敳慰慲整祬‬晩愠祮⸩上瑯㩥‭敂潦敲焠潵楴杮琠敨爠瑡獥瘠獩瑩琠敨猠瑩⁥潦⁲獡敳獳敭瑮漠⁦桴⁥潷歲.ᬀ਀騀ᬂ䱅䍅剔䍉䱁††††††慌潢牵䌠慨杲獥映牯琠敨映汯潬楷杮䨠扯⁳湩汣摵湩⁧業潮⁲獡潳瑲摥洠瑡牥慩楬敫⁳污浵湩畩⽭潣灰牥琠楨扭敬ⱳ瀠捶琠灡獥‬慦瑳敮獲‬捳敲獷‬慷桳牥⁳瑥⹣愠⁳敲畱物摥琠潣灭敬整琠敨樠扯ⴺㄊ‮楄浳湡汴湩⁧景攠敬瑣楲慣挠扡敬⽳楷楲杮‬汥捥牴捩污†楬桧⁴潰湩獴‬慦潰湩獴‬偌倬ⱐ映瑩楴杮☠映硩牵獥攠捴‮牦浯删潯潎㌮ㄱ愠摮†湩汣摵湩⁧桳晩楴杮漠⁦慭整楲污映潲楳整琠瑳牯⁥獡爠煥極敲⁤…獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧ਮ⸲匠楨瑦湩⁧景琠敨䴠䍃ⵂ倴‬〲䄰ⴠ㄰丠⹯楷桴攠据潬畳敲漠桴⁥慳敭䴠⁓潢牡⁤湩汣摵湩⁧楤捳湯敮瑣潩湡⁤敲潣湮捥楴湯漠⁦楷敲⽳慣汢獥‮䔨摮琠牥業慮楴湯漠⁦牡潭牵摥瀠睯牥挠扡敬⁳楷桴戠慲獳朠慬摮琠敢瀠楡⁤敳慰慲整祬‬晩愠祮⸩上瑯㩥‭敂潦敲焠潵楴杮琠敨爠瑡獥瘠獩瑩琠敨猠瑩⁥潦⁲獡敳獳敭瑮漠⁦桴⁥潷歲

Supplying and fixing 8 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 63 A, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 25mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Installation of exhaust fan of size upto 450 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.