Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.0 LAccepted-AOC AZARA PO KAMRUP DIST GUWAHATI 781 015 ASSAM | KAMRUP METRO | ASSAM | 781015 | L1 | Accepted-AOC Lowest Bid | |
| 2 | L2₹13.6 L+₹21,709.48 (1.62%)Rejected-Finance MIRZAPUR PO PS AZARA KAMRUP M ASSAM 781 017 | KAMRUP METRO | ASSAM | 781017 | L2 | Rejected-Finance Other than L1 | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-Not enlisted in appropriate category |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
11 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Borjhar
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati, Assam, Pin- 781015 Tele 0361 - 2840127
Periodical services to certain OMQ and SMQ at certain buildings at Mountain Shadow and other Misc works under GE (AF) Borjhar
2022_MES_552186_1
8303/BOR/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Borjhar
MES Contractor enlisted as Class E category a(i) having deposited Standing Security of Rs 50000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Borjhar
₹30,000
Yes
12 Dec 2022
15 Sept 2022
13 Oct 2022
15 Sept 2022
11 Oct 2022
28 Sept 2022
Amount
Taking down cement plaster or cement lime plaster on PCC/stone surfaces or brick surfaces of walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar (1:6) as on faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar (1:4), mixed with WPC @ 2% by weight of cement consumed or as per manufacturer's instruction and finished the surface even and smooth without using extra cement for sunken slab, etc. complete all as specified and as directed. Note : WPC shall be mesured and paid separetely here-in-after.
M&L for 5mm thick rendering on ceilings in cement mortar (1:4) and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only Integral waterproofing compound (ISI mark), best quality complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over and including one coat of alkali resistant primer over putty finish complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots, etc. including preparation of surfaces with putty finish and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over and including one coat of primer on walls complete all as specified and as directed.
M&L for preparation of new undecorated plastered surface or unplastered surfaces of walls and applying two coats cement base paint complete all as specified and as directed.
M&L for complete removal of existing treatment by any means, preparation to old decorated concrete/plastered surfaces of walls including brooming down, steel wire brushing, scrapping down, smoke soot, moulds, moss, efflorescent salt, etc. complete all as specified and as directed.
M&L for preparation of old treated plastered surfaces of walls of any description over 10cm girth or width, not otherwise described and applying one coat of plastic emulsion paint complete all as specified and as directed.
M&L for complete removal of existing treatment and preparation of plastered surfaces of walls and applying two coats of plastic emulsion paint of approved shade/tint over and including one coat of primer over and including 3mm thick white wall care putty complete all as specified and directed.
M&L for preparation of old plastered/decorated surfaces of walls, stair case, etc.and applying one coat of white wash complete all as specified and as directed.
All as per Serial item No.13.00 here-in-before but as on ceiling surfaces.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of weather proof anti fungal exterior emulsion paint (smooth classic) over a coat of primer complete all as specified and as directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high with thick synthetic enamel paint suitable for writing purpose complete all as specified and as directed
All as per Serial item No 21.00 here-in-before but for stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and as directed.
M&L for preparing of old decorated surfaces of walls, external fins, fascia, vertical and horizontal surfaces of roof projection, chajjas, etc. and applying one coat of weather coat (smooth classic) anti fungal exterior coating emulsion paint complete all as specified and as directed.
Cutting of saplings of any size from bulidings in any situation and at any height including removal of roots from roofs, walls, etc. including applying root killer chemical as per manufacturer's instructions and making good to disturbed portion with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) with finished in cement mortar (1:4) complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over one coat of primer over and including one coat of 3mm thick acrylic wall putty on wall surfaces complete all as specified and as directed.
S&F as in repairs 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in pelmet box, shelves, kitchen cabinet, etc. complete all as specified and as directed.
M&L as in repairs for 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.
M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, pilasters, etc. and applying one coat of white wash complete all as specified and as directed.
All as per Serial item No. 28.00 here-in-before but one coat of white wash as on ceilings.
S&F as in repairs Vitreous China wash down water closet pan (pedestal pattern) white with ‘P’ or ‘S” trap, plastic seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including connection to outgoing pipe & to flushing pipe, anti-syphonage pipe etc as in repairs (excuding flushing cistern and flush pipe) complete all as specified and as directed.
M&L for vitreous china squatting pan "Orissa" pattern of size 580mm x 440mm, white with 'P' or 'S' trap, front or back inlet and with integral foot rest including provision of concrete bedding in PCC (1:5:10) type E-2 (using 40mm graded stone aggregate), jointing traps, etc. with "RBR-modified mortar" including priming of joints using "RBR-Cement" slurry including dismantling old existing one and fixed in same position complete all as specified and as directed.
S&F as in repairs 10 litres capacity PVC valveless symphonic action type low level flushing cistern including 32mm dia PVC flush pipe connected to WC with inlet, ball valve, float and handle lever and fixing on walls with bracket including 15mm pvc connection pipe complete all as specified and as directed.
S&F as in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm including a pair of cast iron cantilever brackets of size 40x40x5mm with and including 32mm dia PVC waste pipe and 32mm dia waste coupling, chromium plated brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F as in repairs PVC connection pipe 50mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete all as specified and as directed.
S&F as in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F as in repairs sink with drainage board, made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, making holes in walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) including taking down old unserviceable sink complete all as specified and as directed.
S&F as in repairs 32mm dia bore, CP waste coupling complete all as specified and as directed.
S&F as in repairs 20mm dia curtain rails of anodized aluminum alloy with fixing brackets complete all as specified and directed.
S&F as in repairs grating square 150mm size of PTMT (Minimum weight 100gms) and fixed complete all as specified and as directed.
S&F as in repairs 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F as in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and fixed on wall with chromium plated brass screws complete all as specified and as directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Sq.m each, removing from the site including taking out existing hold fasts, etc. complete all as specified and as directed.
All as per Serial item 43.00 here-in-before but area exc. 1.50 Sq.m but n. exc. 4 Sq.m each.
Taking down of shutters of any description n. exc 1 sq.m each including iron mongrey & removing from site complete all as specified and as directed.
All as per Serial item No. 45.00 here-in-before but exc. 1 sq.m and n. exc. 2 sq.m each
Re-fixing in same opening serviceable shutter of any description not exceeding 1 Sq.m each complete all as specified and directed.
All as per Serial item No. 47.00 here-in-before but exc. 1 sq.m and n. exc. 2 sq.m each
Cutting holes in brick walls for inserting holdfasts and making good dismantled portion by filling cement mortar (1:3) or PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) exc. half brick thick but n. exc. one brick complete all as specified and as directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and as directed.
S&F for MS work of flat iron of size 30mm x 6mm thickness as in hold fast, etc. confirming to Fe-410-0 (Grade-E-250 Quality-A) complete all as specified and as directed.
S&F flush shutters 20mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides for cup board and similar work complete all as specified and as directed.
S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.
S&F for glazed and skelton shutters 30mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze, etc. (Without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats complete all as specified and as directed.
S&F for 30mm thick second class hard wood glazed and skelton shutters for windows and ventilators, etc., open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24(b); complete all as specified and as directed.
S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, and edges will be painted to match will printed sheet fixed in opening as per specification and drawings complete all as spcified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.
M&L for 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work for kitchen cabinet complete all as specified and as directed.
S&F MS helical door spring 300mm long tail pattern conforming to IS-452-1975 cmplete all as specified and as directed.
S&F for door seal bottom made of aluminium body with nylon rubber bottom or bristles with not less than 94 cms in length for blocking of the entry of dust and crawling elements from under the door complete all as per sample and specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame including punching or drilling out old glazing pins/spring clips or fixed with putty or beads complete all as specified and as directed.
S&F for 3mm thick Sheet glass, ordinary quality and glazing with oil putty or with wooden beading are wooden frame or steel frame in square, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed.
S&F for 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads in square, area n. exc. 0.5 sq.m in each pane complete all as specified and as directed.
S&F for galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F as in repairs for galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and as directed.
S&F for butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed.
S&F MS butt hinges of size 75mm long, medium weight, cold rolled complete all as specified and as directed.
S&F for aluminium handles of size 150mm, cast type, anodised complete all as specified and as directed.
S&F for 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F for 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
M&L preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shoudered and/or riveted or forged in to spikes, framed guard bars, barred iron doors and similar works of Gde E-165 (Fe 290) including welding etc. complete all as specified and as directed.
Dismantiling of wall and ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed
M&L for 4mm thick non asbestos fibre cement building designed boards, fixed or laid/ inserted to timber/GI/Aluminium framework with screws and fixed in celing flat or slope complete all as specified and as directed.
S&F of 605x605mm anodised aluminium snap grid frame work for false ceiling incl all required fixing accessories using necessary tools etc. complete all as specified and as directed
Removing and re-fixing in same position of ceiling boards (fiber, pulp, insulstion, etc.) or insulation boards/slabs/blankets, any thickness after cleaning and dusting off the dirt using duster/cotton waste, etc.complete all as specified and as directed.
S&F as in repairs stainless steel kitchen plate rack of overall minimum size 24" x 30" and 10" deep, with partitions for small/large plates, etc. made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws complete all as specified and as directed. Make : Prayag, Cat No. P-330 or equivalent model from make listed in Particular Specifications.
S&F as in repairs PVC cabinet mirror of size 350mm x 500mm x 100mm complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M&L non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors, etc. over and including 15mm thick screed bed or bedding layer set in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.
M&L for non skid ceramic designer coloured tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick as on vertical surfaces such as dado, skirtings, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick rendering screed bed in cement mortar (1:4) complete all as specified and as directed.
M&L for Vitrified Ceramic tiles, light shade/ dark shade/Double Charged/Ultra charged, 10mm thick (square or rectangular) polished, area of each tiles not exc. 0.36 sqm, laid as in floors, etc. set and jointed with cement slurry over and including 15mm thick bedding of layer of cement mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as as directed.
All as per Serial item No. 86.00 here-in-before but as in skirting/dado, etc. laid over and including 15mm thick rendering (as screed bed) in cement mortar (1:4)
S&F as in repairs for chromium plated towel rail, 20mm dia, 45cm long between flanges and fixed to wall with chromium plated brass screws, washers and nylon sleeves complete all as specified and as directed.
S&F as in repairs 15mm bore bib tap, two ways, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
S&F as in repairs hand shower (Health Faucet) (ABS Body) with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and as directed Make : Jaquar, Cat No. ALD-CHR-593N or equivalent model from make listed in Particular Specifications.
S&F as in repairs 50mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified and as directed.
S&F as in repairs 50mm bore PVC (SWR) bends, tee, unions and the like of any radius complete all as specified and as directed.
S&F as in repairs 15mm bore stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy, chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and as directed.
S&F as in repairs over head shower, cast copper alloy, fancy type with flanged of size 15mm bore. chromium plated 125mm dia complete all as specified and as directed.
Taking up or down steel tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches, etc. complete all as specified and as directed.
S&F as in repairs galvanized steel water tubing, medium grade of size 15mm bore including all fittings and fixed to walls and ceilings or laid in floors, etc. complete all as specified and as directed.
Taking up or down steel tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches, etc. complete all as specified and as directed.
S&F as in repairs galvanized steel water tubing, medium grade of size 20mm bore including all fittings and fixed to walls and ceilings or laid in floors, etc. complete all as specified and as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of any size with necessary minor fittings and fixtures complete all as specified and as directed
S&F as in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F as in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with WHB complete all as specified and as directed.
S&F as in repairs brass CP wall mixture with hand shower, 'T' bend or 'L' bend tap for 15mm bore pipe (three in one) complete all as specified and as directed.
Dismantling water tanks exc. 250 litres and n.exc. 500 litres capacity and removal from site complete all as specified and as directed.
S&F for 500 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical/vertical with closed top), hoisted and fixed in position complete all as specified and as directed
Dismantling water tanks exc. 500 litres and n. exc. 1000 litres and removal from site complete all as specified and as directed.
S&F for 1000 litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical/vertical with closed top), hoisted and fixed in position complete all as specified and as directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs of roof, cleaning etc and hoisting if required reconnecting and re-fixing in position exc. 250litres and not exceeding 500 litres capacity by aligning with the pipe and removing the debris below the tanks complete all as specified and as directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs of roof, cleaning etc and hoisting if required reconnecting and re-fixing in position capacity exc 500 litres and not exceeding 1000 litres by aligning with the pipe and removing the debris below the tanks complete all as specified and as directed
S&F as in repairs ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 15mm dia iron pipe and fixed (minimum weight 142 gram) complete all as specified and as directed.
S&F as in repairs ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm dia iron pipe (minimum weight 210 gram) complete all as specified and as directed.
Taking out old existing treatment of any thick and any position of RCC roof by scrapping, scrubbing, brooming down, etc. complete all as specified and as directed.
M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof padding, surface finished even & fair without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick cement plaster with in cement sand mortar (1:4) mixed with WPC as per manufacturer instructions on other than fair faces of brick surface, finished even and fair without using extra cement over and including cement slurry @ 3 Kg per Sqm on existing roof surface complete all as specified and as directed. Note : WPC shall measured and paid separately.
M&L for preparation and cleaned to plastered/ concrete surfaces of roof and applying the under mentioned course of roof treatment as given below :- (a) Applying evenly compactible primer @ 0.4 litre per Sq.m over concrete/plastered roof surface (b) Applying a tack coat of industrial bitumen 85/25 grade (ISI marked) @ 1.2kg/Sqm (c) Laying of 3mm thick membrane sheet of weight not less than 3.6 kg/Sq.m with minimum longitudinal end over laps of 100mm and horizontal side laps of 75mm and joints finally thermo-fused with help of LPG flames. Membrane sheet laid over a tack of industrial bitumen 85/25 as specified here-in before. (d) Rest all as specified and as directed by Engineer-in-Charge at site.
Repairing of leakage of water supply system i.e., for 15mm/20mm inlet/outlet pipe in any location any position or removal of air lock/blockage of water in GI tubing 15mm / 20mm bore and cleaning the pipe or fittings, etc. and re-fixing the same in same position or petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valves, etc. of any description by changing the washers, etc. complete all as specified and as directed
Easing of door/window shutters/CB/Kitchen cabinet of any size/ any number of panels for easy closing/ opening, tightening of hinges or handles or changing the position of hinges or handles / knobs, hasp and stapple adjustments of tower bolts, sliding bolts, etc. including all necessary minor fittings and fixtures as required to smooth functioning complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) mixed with WPC by weight of cement as per manufacturer instructions as in sunken floor, finished the surface even and fair without using extra cement complete all as specified and as directed. NOTE : WPC shall measured and paid separately.
M&L for cleaning to concrete/plastered surfaces of sunken slab and applying water proofing treatment complete all as specified and as directed in the following courses :- (a) Applying bitumen primer @ 0.80 kg/sqm. (b) Applying a tack coat of bitumen 85/25 cofirming to IS-702 @ 1.20kg/sqm. (c) Supplying and laying 150 micron thick polyethylene film of Superior quality. (d) Applying a tack of bitumen 85/25 @ 1.20kg/sqm over polythene film
S&F as in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including all fittings and fixtures complete all as specified and as directed.
S&F as in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints / solvent cement joints fixed to walls including all clamps complete all as specified and as directed.
S&F as in repairs 110mm bore PVC (SWR) bends, any radius complete all as specified and as directed.
M/s Kajal Das
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .