Supply, Installation, Testing and Commissioning of Central Heating System to the Additional Block at Dental College/Hospital.

Amount

Supply Installation Testing and commissioning of Horizontal, HSD fired, coil type Hot Water Generator of capacity 3 lac kcal/hr each complete with , combustion equipments, control panel, control valves & other accessories including the flue gasses duct (chimney) with allied civil works and as per techinical specifications

Supply Installation Testing and commissioning of 12 hp, 3 Phase hot water circulation pump (3"x2.5") with Mechanical Seal coupled with electric motor fitted on a base frame including the civil foundation and as per techinical specifications

Supply Installation Testing and commissioning of 3 hp, 3Phase Raw water feed Pump (1"x1") complete with electric motor and as per techinical specifications

Supply Installation Testing and commissioning of MS Mixing Tank of capacity 3000 lts duly insulated /cladded along with allied items and as per techinical specifications

Supply Installation Testing and commissioning of 1000 lts HDPE raw water Storage tanks complete with piping, fittings, valves, mountings , pedestal and other mountings as per techinical specifications

Supply Installation Testing and commissioning of 1000 lts MS Expansion tank complete with piping, fittings, valves, mountings, insulation & cladding as per techinical specifications

Supply Installation Testing and commissioning of radiators of following capacities as per techinical specifications

4500 kcal/hr - Triple panel

4000 kcal/hr - Triple panel

3500 kcal/hr - Triple panel

3000 kcal/hr - Double panel

Supply Installation Testing and commissioning of G I "B" class piping 25 mm dia. Along with fittings like tees, elbows, nipples , unions and sockets etc complete in all respects as per techinical specifications

Supply Installation Testing and commissioning of G I "B" class piping 40 mm dia. Along with fittings like tees, elbows, nipples , unions and sockets etc complete in all respects as per techinical specifications

M S C CLASS Piping

Supply Installation Testing and commissioning of Mild Steel class ‘C’ ERW pipes of following diameters with fittings like tees, elbows, bends, junctions, unions, flanges etc. clamps structural supports, wooden pedestals as per site requirements including application of anticorrosive paint of approved shade over a coat of primer and as per techinical specifications

Insulation for outdoor Aluminum Laminated Glass wool ( Pipe section) insulation of following diameters with aluminum cladding as per techinical specifications

Insulation for indoor as per techinical specifications

Elastomeric nitrile foam

Supply Installation Testing and commissioning of valves along with allied items of below mentioned diameters as per techinical specifications

Butterfly Valves

32 mm (ball valve)

25mm (ball valve)

20mm (ball valve)

Y STRAINERS as per techinical specifications

Non Return Valves as per techinical specifications

Air Release Valves(25 mm) as per techinical specifications

Pressure gauge with isolation cock as per techinical specifications

Digital Temperature gauge as per techinical specifications

Electrical Works

Control panel comprising of Bus bar MCCBs, contactors, relays, single phase preventors, earth fault relays, changeover switches, for Pumps, Hot water generators , emersion heaters, cables etc with following specifications. Incomer: 4 Pole 200 Amp MCCB with CTR 100/5,5VA,CL-1, volt and ampere metres BusBar: Bus bar 200 Amp TPN electrolytic grade aluminium bus bar). Outgoing:32 A MCB's for boiler (01 No) 12 HP DOL starter for circulation pumps (1NO) 1.5 HP DOL starter for Raw Water Pumps (1 NO) and any other electrical items necessary for the commissioning

Providing and Laying of 4 sqmm 3 Core flat_type,copper Cable connecting various equipments of the system in the plant room.

Supply fabrication and fixing of cable Trays to be fabricated out 150x40 mm duly painted slotted MS Channel in the plant room.

Earthing of all the electrical gadgets as per Indian electricity act.

Structural steel in the form of M.S angles, channels etc required for various supporting aids.

M/s Bhat Engineering Works

ECO HVAC SOLUTIONS