SPECIAL REPAIRS TO BLDG NO 65 SF MARRIED QTR AT LAXMITEK AREA, SPECIAL REPAIRS TO ROOF TREATMENT OF BLOCK NO 69 AT ACHARYA ENCLAVE, SPECIAL REPAIRS REPLACEMENT OF OLD UNSERVICEABLE GEYSERS AT ACHARYA ENCLAVE AGAINST BER UNDER GE BELGAUM

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removal of rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris complete all as specified and as directed .

Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring including necessary form work complete. all as specified and as directed.

Material and labour for Premium quality coloured vitrified tiles, square or rectangular, light shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm, as in floor/ skirtings, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete. all as specified and as directed Note.:Make of Vitrified tile : HR Johnson/Kajaria/Somany

Material and labour for Premium quality Coloured non skid ceramic tiles, 7mm thick, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete. all as specified and as directed . Note :Make of ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Premium quality coloured glazed ceramic tiles of size 450mm x 300mm x 7 mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tile including 10mm thick backing coat in CM 1:4 complete. all as specified and as directed . .Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) of area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each and taken as credit complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) of area not exceeding 1.50 Sqm each and taken as credit complete all as specified and as directed.

Taking down shutters of any description of area n exc 1 sqm each and taken as credit complete all as specified and as directed..

Taking down shutters of any description of area exc 1 sqm and n exc 2.0 sqm each and taken as credit complete all as specified and as directed...

Material and labour for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position .complete all as specified and as directed

Material and labour for Factory made 35 mm thick Second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 12 mm thick commercial plywood BWR ,9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats all as specified and as directed.

Material and labour for Factory made 35 mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for Factory made Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc complete all as specified and as directed .

Note : (i) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (ii) Make of Glass : :Saint Gobain/Modi Guard/ Gold Fish (iii) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of anodisation shall be of 15 Microns

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; framed ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Supply and fix Mild steel butt hinges 100mm in size, medium weight, cold rolled complete all as specified and asdirected.(ISI MARKED)

Supply and fix Stainless steel butt hinges 100mm in size, medium weight complete all as specified and as directed.(ISI MARKED)

Supply and fix 300mm long Mild steel helical door spring, ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/ steel chowkats complete all as specified and as directed..(ISI MARKED)

Description all as per item no :20 here in before but fixed in repairs.

Supply and fix Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and as directed.Note :Make : Classic/Crown/Adarsh

Description all as per item no :22 here in before but fixed in repairs.

Supply and fix Aluminium handle, 'D' type, anodised 150 mm in size complete all as specified and as directed.Note :Make : Classic/Crown/Adarsh

Supply and fix Aluminium handle, 'D' type, anodised 125 mm in size complete all as specified and as directed.Note :Make : Classic/Crown/Adarsh

Supply and fix 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. Note :Make : Classic/Crown/Adarsh .

Description all as per item no :26 here in before but fixed in repairs.

Supply and fix in repairs 50mm size cupboard lock, brass, two levers, grade 1 complete all as specified and as directed. Note :Make : Harrison/Dhanraj/Godrej

Material and labour for floor door stopper of brass body and tongue, anodised, with 140mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and directed. Note :Make : Classic/Crown/Adarsh

Description all as per item no :29 here in before but fixed in repairs.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs Harrison rail , mild steel,chromium plated powder curtain rods, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps complete all as specified and as directed.(ISI MARKED)

Material and labour for 18mm thick Prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs,complete all as specified and as directed. Note : Make : Kitply/Green ply/ Century .

Material and labour for 18mm wide x 6mm thick external teak wood lipping around edges of particle board/ plywood including french polishing, fixed in repairs complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of existing precast concrete articles.of any description and taken as credit complete all as specified and as directed..

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC 1:3:6,type C-1 ,using 20 mm graded stone aggregate as in coping ,bed blocks, eaves filling between wall and tile/sheet roofing complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of stone masonry finished even and smooth without using extra cement, complete all as specified and as directed

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound . Note : Make :Impermo/Roff/Cico

Material and labour for Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls, cornices, pillasters, etc and applying .two coats of oil bound distemper (Acrylic distemper washable) iover a coat of chalk whitening primer complete all as specified and as directed.

Material and labour for Two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new and old surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer over 1mm thick layer of wall care putty complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

Material and labour for Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of stone slab/ tiles, paver blocks of any description and any thickness in floors laid, bedded and pointed in any mortar and removal of rubbish off the premises complete all as specified and directed.

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 75 mm thick as in sub base to floorincluding necessary steel form work complete all as specified and directed

Material and labour for PCC 1:2:4 (type B-1) using 20 mm graded stone aggregate , 100 mm thick as in floor including necessary form work complete all as specified and as directed

Material and labour for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and directed

Material and labour for Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc.including necessary form work complete all as specified and as directed. .

Supply and fix 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces complete all as specified and as directed. Note : Make of CPVC Pipes : AShirwad/Astral (ISI MARKED)

Supply and fix 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces complete all as specified and as directed. Note : Make of CPVC Pipes : AShirwad/Astral (ISI MARKED)

Supply and fix in repairs Fancy type Bib tap of 15mm dia cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and as directed . Note :Make : Seico/GEM/ESS ESS

Supply and fix in repairs 15mm bore dia of pipe PTMT bib tap, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe complete all as specified and as directed. Note : Make : Prayag/M/S Shakthi Industries

Supply and fix in repairs 15mm bore stop valve, fancy type, brass chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.. Note : Make : Metro / GEM /ESS ESS

Supply and fix in repairs 15mm bore Pillar tap brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for iron pipe for unions complete all as specified and as directed.Note : Make : Metro / GEM /ESS ESS

Supply and fix in repair vitreous china oval type wash basin, white, size 550x400mm, with PVC waste pipe and waste fittings including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc..complete all as specified and as directed.

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern of size 580 x 440 mm, white, with integral foot rest including 'P' or 'S' trap etc including provision of lime concrete bedding .complete all as specified and as directed.

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connection to pipe .complete all as specified and as directed. Note : Make :Parryware (Slim Line ) /CERA/ Hindware

Supply and fix in repair 1mm thick Stainless steel sink, overall size 495x420mm, bowl size 410x330x160mm, with plug, washers and wastes including bedding in cement mortar, fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.Note : Nirali /Joyna

Supply and fix in repairs PVC flexible pipe (waste pipe) ,suitable for 32 mm bore waste coupling of sink/wash hand basin complete all as specified and as directed.

Supply and fix in repairs Waste coupling of PTMT with necessary washers ,half or full threated ,minimum weight 45 gms,suitable for 32 mm bore discharge pipes of WHB /Sink complete all as specified and as directed .Note : Make : Prayag/M/S Shakthi Industries

Supply and fix in repairs brass chromium plated towel rail 600mm long with and including Chromium plated brass screws and wooden/ plastic cleats all as specified and as directed.(ISI MARKED)

Supply and fix in repairs Brass chromium plated perforated shower rose with swivel joint type 125mm size suitable for fixing with 15mm bore pipe including 300mm long brass CP shower arm complete all as specified and as directed. Make: CON-273KNUPR of JAQUAR or equivalent model in JOHNSON/ CERA

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and as directed.Note : Make : Prayag/M/S Shakthi Industries

Supply and fix in repairs Grating doom ,125 mm dia of PTMT(minimum weight : 40 gms) with waste hole complete all as specified and as directed.Note : Make : Prayag/M/S Shakthi Industries

Supply and fix in repairs Grating doom ,100 mm dia of PTMT(minimum weight : 25 gms) with waste hole complete all as specifiedd and as directed.Note : Make : Prayag/M/S Shakthi Industries

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises complete all as specifiedd and as directed.

Supply and fix in repairs 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 75mm bore UPVC (SWR) bend any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) bend any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) branch piece, single Y, equal or unequal with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) vent cowl all as specified and directed. Note : Make : Finolex/Supreme/Prince

Supply and fix PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75mm dia outlet complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Demolition of cement concrete in any description and in any position including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for Plain cement concretType E2 1:5:10 using brick aggregates as in sunken floor filling complete all as specified and as directed.

Material and labour for Applying evenly a coat of blown grade bitumen at the rate of 1.50 kg per square metre and binding with clean dry sand @ 0.05 cu. m. per sq. m over sunken floor complete all as specified and as directed.

Supply and fix Rolled Mild steel work as in posts ,tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed

Supply and fix Rolled mild steel work as in roof trusses (framed),,trussed, purlins ,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angles,channel or flat sections) incl distance pieces ,cleats etc as in Fe-410 W (Gde-E-250) quality B complete all as specified and as directed

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Removing existing roof/chajja treatment of any type like plastic felt/HP tiles including existing plastering /concrete in covering of any thickness and cleaning the slabs with wire brushes complete including removal of debris to a distance exc 50 m but n exc 100m and Brushing the cleaned surface with neat cement slurry @ 3Kg/Sqm over rendering 10mm thick on concrete surfaces in CM 1:3 over roof surface even and smooth without using extra cement with water proofing compound over preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 1.7kg per Sqm and providing 3mm thick APP based polymeric membrane weight not less than 4kg/Sqm reinforced with non oven polyester mat weight not less than 150 gms per Sqm including min 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm and on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm complete all as specified and as directed

Material and labour for Kota stone slab 20-25mm thick as in landing,riser and tread in steps skirting, dado over 15 mm thick in Cm 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete all as specified and as directed

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and as directed.

Dismantling of old unserviceable submain wiring with aluminium conductor cable of sizes 2, 2.5 & 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and including PVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system and provision of green coloured FRLS PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly including provision of suitable size of modular metal box fixing in wall with white colour cover plates and all accessories for mounting modular type switches, sockets, fan regulators, bell pushes etc. and taking down unserviceable point wiring of any description from existing surfaces and taken as credit for One light point controlled by one switch 1 way. complete all as specified and as directed.NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells(ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per item No. 94 here in before but for One bellpoint controlled by one bell push

Description all as per item No. 94 here in before but for One Ceiling fan controlled by one switch and regulator.

Description all as per item No. 94 here in before but for One exhaust fan point controlled by one switch

Description all as per item No. 94 here in before but for one 03 pin ,05 amps socket outlet on independent board .

Description all as per item No. 94 here in before but for One light point controlled by two 2 way switches.

Description all as per item No. 94 here in before but for One 05 Amps socket outlet on the same board with other switches.

Description all as per item No. 94 but wiring with 2.5 Sqmm FRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand /Cona

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC two way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand /Cona

Supply and fix Modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and as directed. Make -Anchor (Roma) /Legrand /Rider

Supply and fix Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed Make -Anchor (Roma) /Legrand /Cona

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified . Make -Anchor (Roma) /Legrand /Cona

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand /Cona

Supply and fix call bell ding dong AC 230 volts, complete all as specified and as directed. Make -Anchor (Roma) /Legrand /Rider

Supply and fix in repairs or replacement of PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repair Modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and as directed. Make -Anchor (Roma) /Legrand /Cona

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 6 Sq mm for earth continuity and connected to common earth dolly , ,complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and connecting up with FRLS PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Philips cat part no : Model Number: BN 021C LED20S PSU CDL/NW GR or equivalent price and specification of M/S Wipro/CG

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and connecting up with FRLS PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Philips cat part no : BN 021 LED10S- 6500/4000 PSU GR S1 or equivalent price and specification of M/S Wipro/CG

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 5 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and connecting up with FRLS PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and as directed. Make : Philips cat part no : BRP020 LEDHP/CW 240V 25W or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with FRLS PVC twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and as directed. Make: Philips cat part no :EnduraLED Bulkhead WT202W LED10S CW PSU S3 PC or Equivalent price and specification in M/S Wipro/CG

Supply and fix ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) and taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient Note:- Old ceiling fan will be deposited in MES store yard

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep , 50 Hz , 1200 RPM ,copper winding with, blades, and frame and louvers ,Heavy Duty and including making suitable arrangement for fixing the exhaust fan i.e.,making suitable holes,grouting , anchor fastener bolts etc and matching the surface with existing surface and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed. Make : Almonard/Bajaj/Khaitan

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding , sweep 250 mm with necessary grouting and fixing arrangements and provision of FRLS PVC 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed .Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Taking down existing MCB DB alongwith MCBs & old wooden boards & making good to disturbed surfaces to matcg with the existing surface and old items taken as credit complete all as specified and as directed

Supply and fix Factory made epoxy powder coated vertical type distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed. Note : Make : Indo Asian/Legrand /Havells

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed. Note : Make : Indo Asian/Legrand /Havells

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed Note : Make : Indo Asian/Legrand /Havells

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 2 SP MCBs as outgoings complete all as specified and as directed Note : Make : Indo Asian/Legrand /Havells

Supply and fix Miniature circuit breaker (MCB) of SPN 40 to 63 AMPS rating 240V, 10KA 'C' curve complete all as specified and as directed Note : Make : Indo Asian/Legrand /Havells

Supply and fix Miniature circuit breaker (MCB) of SP 6 to 32 AMPS rating 240V, 10KA 'C' curve complete all as specified and as directed Note : Make : Indo Asian/Legrand /Havells

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Taking down existing unserviceable energy meters,dismantling and removing and refixing with suitable arrangement i.e on 2nd hard wood sunmica board or fixing in panel for metering purpose complete all as specified and as directed

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Note : Make : Gloster/Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc, in any type of Soil complete all as specified and as directed

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm thick with soil obtained from excavation .complete all as specified

Removing excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point .complete all as specified and as directed.

Supply and lay 25 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

Taking up or down steel tubing of size upto 40 mm bore and connections, and taken as credit complete all as specified and as directed .

Supplyind and laying CPVC pipes 40 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral (ISI MARKED)

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral (ISI MARKED)

Supplyind and laying CPVC pipes 20 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral (ISI MARKED)

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete including demolition/taking down of the existing RCC/PVC water storage tank of any description from the existing staging/ Bldg after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed. Note :Make of HDPE tank : Sintex/Infra/Polycon

Supply and fix in repairs 25 mm dia PTMT ball valves high pressure (minimum weight : 210 grams) with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of for brass ferrule complete all as specified and as directed.Note :Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs 25 mm bore dia Gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed . Note : Make : Leader/Zoloto/Kartar

Supply and fix in repairs 40 mm bore dia Gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed Note : Make : Leader/Zoloto/Kartar

Material and labour for Construction of valve chamber of internal size 900 x 900 x 960mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle iron frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as directed.

Disconnecting existing tanks exc 250 ltr and n exc 500 ltr, setting aside (or lowering if required) for repairs,cleaning etc and hoisting if required. Reconnecting and re-fixing in position (cleaning and repairing etc shall be measured separately).

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item No 147 here in before but 20mm dia bore of pipe.

Supply and fix Unplasticised PVC pipes of 15mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Description all as per item No 149 here in before but 20mm dia bore of pipe.

Refixing old UPVC/GI tubing 15 mm bore dia in new or old position (wall,ceiling and floor etc) complete all as specified and as directed

Description all as per item No 149 here in before but 20mm bore dia of pipe.

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm and providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm incl min 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm and on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm , complete all as specified and as directed

Material and labour for Rendering 10mm thick in cement mortar 1:3 on concrete surfaces with water proofing compound and finishing the surface even and smooth without using extra cement, complete all as specified and as directed

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1: 6 on fair faces of PCC block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick wall case putty complete all as specified and as directed.

Material and labour for Preparing newly plastered surface of wall and applying two coats of exterior emulsion paint (Make :Apex ultima - Asian paint) over a coat of water based primer complete all as specified and as directed.

Material and labour for complete removal of old plastered/unplastered surfaces of wall and brooming down and applying two coats of exterior emulsion paint (Make :Apex ultima - Asian paint) complete all as specified and as directed.

Supply and fix Electric water heater, storage type ABS complete with shock proof body and mild steel with glass lined coating inner tank and Glass lined coated incoloy heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connector piece etc fixed to wall with suitable bolts and nuts duly grouted including re-connecting the electrical and water supply connection and testing complete all as specified and as directed .Note :Make : Bajaj (Calenta M )/Havells(Monza EC )/Racold.

Supply and fix PVC connection ( ISI marked ) 15mm dia 600mm long with brass nuts suitable for hot/ cold water supply complete all as specified and as directed.

Supply and fix Fancy type chromium plated with long shank and cup (concealed type ) Stop valve of 15 mm dia, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. . Make : Seico/Prayag

Material and labour for FRLS PVC insulated and sheathed flexible multistranded copper conductor cable, 3 core x 2.5 sqmm size, 1100 volts gradecomplete all as specified and as directed. NOTE. Make of PVC flexible cable :Finolex/Polycab/Havells

Supplyind and laying CPVC pipes 16 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral (ISI MARKED)

M/s.Y.N.PATIL

M/s B C CHOUGULE

ASHOK M RAJGOLKAR

M/s. KIRAN M CHOUGULE

M/S MAHADEV M PATIL

DHANSHRI ENTERPRISES