PROVISION OF DEFICIENT SECURITY AND ALLIED FACILITIES AT GHATKOPAR

Amount

SCHEDULE "A" Part - I (BUILDINGS & STRUCTURES WORKS) Total of Sch-'A' Part-I B/F

SCHEDULE "A" PART-II (SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II B/F

SCHEDULE "A" PART-III (DEMOLITION/ DISMANTLING) Total of Sch-'A' Part-III B/F

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-IV B/F

SCHEDULE "A" PART-V (INTERNAL ELECTRIFICATION) Total of Sch-'A' Part-V B/F

SCHEDULE "A" PART-VI (ROAD, HARDSTANDING & CULVERTS) Total of Sch-'A' Part-VI B/F

SCHEDULE "A" PART-VII (AREA DRAINAGE) Total of Sch-'A' Part-VII B/F

SCHEDULE "A" PART-VIII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VIII B/F

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-IX B/F

SCHEDULE "A" PART-X (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-X B/F

SCHEDULE "A" PART-XI (FIRE FIGHTING) Total of Sch-'A' Part-XI B/F

SCHEDULE "A" PART-XII (LIGHTNING PROTECTION) Total of Sch-'A' Part-XII B/F

SCHEDULE "A" PART-XIII (WATER COOLER) Total of Sch-'A' Part-XIII B/F

SCHEDULE "A" PART-XIV (TELEPHONE & LAN SOCKETS) Total of Sch-'A' Part-XIV B/F

SCHEDULE "A" PART-XV (LIFTS ) Total of Sch-'A' Part-XV B/F

SCHEDULE "A" PART - XVI (MISCELLANEOUS ITEMS)

SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK

Removing excavated material (any type) and depositing it outside Ministry of Defence Land. Note: (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

DEMOLITION / DISMANTLING

Taking down copper/Aluminium point wiring (Light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for tanking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls floors, etc all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

Taking down all type of old unserviceable MCB DBs etc complete all as specified and directed.

Taking down all type of old unserviceable MCBs (SP/SPN/TPN/TP) etc complete all as specified and directed

Taking down U/S Submain wiring of copper/ Aluminium twin core cable of various sizes complete.

Taking down carefully by unscrewing light fittings of any type (tube lights fittings) any wattage etc.(all items to be deposited to MES Maintenance store)

Removing debris obtained from demolition of buildings and depositing it outside Ministry of Defence Land. Note: (i) Before quoting the tender, the bidders are advised to ascertain the distance outside MD and, at which the excavated material/ debris are to be disposed off. No extra claim what-so-ever shall be entertained on this account. (ii) This item shall be considered as per the requirement at site.

Dismantling Old PVC water tank 500 Litre capacity

Dismantling Old PVC Flushing cistren of any type

INTERNAL WATER SUPPLY

S & F of Hand shower( health faucet) with 1 metre long easy flex tube in chrome finished and wall hook with NRV complete all as specified and directed.

S & F of Pressure relief valve (PRV) of a) 25mm dia

b) 32mm dia

c) 40mm dia

INTERNAL ELECTRIFICATION

S & F modular type 25/32 A SP MCB, conforming to IS 60898- 1: 2002 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand Mylinc Cat. Part No. 6732 05 or techno commercial equivalent model of any of the makes in the list

S & F modular type 3 pin 25/32 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. Make: Legrand Ekinox³ Cat-Part No. 5734 66 or equivalent model of MK Cat-Part No. W26427, or Havells Cat-Part No. AHOKCXW251

S & F vertical triple pole & neutral, double door, metallic modular distribution board, 4- Way conforming to IEC 61439-3, suitable for flush / surface mounting with provision for MCCB up to 250 A as incomer and SP/TP MCBs as outgoing, reversible metal door, fully insulated 250 A copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed by engineer-in-charge. NOTES: [i] FP MCCB & SP/TP MCBs shall be measured and paid separately.

S & F 20 W surface / wall mounted LED batten capable of delivering minimum 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED20S PSU CDL/NW GR or techno commercial equivalent model of any of the makes in the list

S & F 3-star (EEL) T-shape lamp capable delivering 1000 lumen having luminous efficacy of > 100 lm/W, starting time < 0.5 s, CRI > 80, CCT 6500K, PF >0.9, input voltage range 140- 270 V, input frequency 50- 60 Hz and B22 socket complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. T- Bulb CW 10W B22 or equivalent model of Havells Cat-Part No. LHEXACP7FN1W010 or Wipro Cat-Part No. LL20-111-XXX-65-NE

S & F surface mounted round shape LED downlight capable of delivering 1200 lumen. having minimum luminous efficiency > 100 lumen/W, CCT 6500K, CRI > 80, high quality polycarbonate diffuser, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. SM250C LED12S- 6500 PSU WH or equivalent model of Havells Cat-Part No. LHEAABP7IL1W012 or Wipro Cat-Part No. LD80-101-XXX-60-SM

S & F 25 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 2600 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. NOTE: The rate shall be including security light fittings and GI pipe bracket with all fixing accssories. Make: Philips BRP052 LED 036 CW HP SLA FG S1 PSU GR or techno commercial equivalent model of any of the makes in the list

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge.

EXTERNAL ELECTRIFICATION

M & L GI Octagonal poles complete with single arm bracket as specified all for 9 Each mtrs long with 70 mm top dia and 155 mm bottom dia, made of 3 mm thick tensile sheet alongwith base plate of size 225x225 x12 mm thick incl 04 nos, of M24 x750 long J type foundation bolts incl MCB 6 amps with 4 way heavy duty connector 32 Amps complete with its foundation all as specified by the pole manufacturer all as specified and directed by E-in-Charge. (rate quoted shall be inclusive all foundation RCC form work complete)

SITC Main LT panel, outdoor type cubical panel board, made out of 3.15 mm thick Each CRCA sheet, duly powder coated, compartmental design with locking arrangements, weather and vermin proof with proper ventilation slots, IP 55 free standing floor mounted with aluminium busbar of suitable size for phase and neutral mounted on hygroscopic insulators comprising of the following: INCOMER i) MCCB 250 A, incomer, 415V, 50Hz, 36 KA-02 No. OUTGOING i) MCCB 4 Pole, 200 A, 415V, 36 KA -1 Nos. (FF Panel) ii) MCCB 4 Pole, 100 A, 415V, 36 KA-2 Nos. (Bldg Panel & 01 Spare) iii) MCCB 4 Pole, 63A, 415V, 36 KA-2 Nos. (Lifts & W/S Pumps) iv) MCB SPN 16 A, 240 V. 10 KA-2 Nos. (Street Light & 01 Nos Spare) BUSBAR i) 400 Amp rated cupper bus bar METERING & INDICATION i) Ammeter, Digital type, with suitable CTS-01 set ii) Voltmeter, Digital type -01 set iii) R-Y-B phase indicating lamp- 04 Nos iv) MF Meter-01 No.

Fabrication, Supply, Installation, Testing & Commissioning of LT control panel cubical type, floor mounted (indoor type), fabricated out of 2 mm thick CRCA shent, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, single come PVC Insulated FRLS copper conductor cables for connection, suitable mountings for switchgears and accessories and internal control, power wiring with suitable rating PVC Insulated FRLS copper conductor cable, earth terminals, etc. suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 55 complete CPRI approved comprising of following:- (FF Panel) (a) Copper busbar 300 Amps with higrow scopic insulators for P&N-01 Set INCOMER i) MCCB 4 Pole, 200 A, 415V, 35 KA, Microprocessor based -1 No. OUTGOING i) MCCB 4 Pole, 125 A, 415V, 25 KA-1 No, with thermal magnetic setting (Sprinkler Pump with soft starter) i) MCB TPN 32 Amps - 2 Nos(for Jockey Pump & 01 Spare) ii) Soft starter for 55 KW Pump Set with protection single phase over load and under voltage,415 V,50 Hz suitable for electric driven pump set-01 No Star delta iii) DOL starter for 5 HP Pump set with protection single phase over load and under voltage, 415V, 50HZ suitable for jockey pump-01 No. iv) Ammeter, Digital type, with suitable CTS-01 set, Voltmeter, Digital type -01 set. R-Y-B phase LED indicating lamp- 03 Nos v) MF Meter-01 No.

M & L for Earthing complete with galvanised earth plate electrode 60 cm x 60cmx each 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip 32 x 6 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore medium grade GI Pipe with MS funnel with wire mesh, watering arrangement and 40 mm bore medium grade Gl pipe for earth lead protection from earth plate to test point or pannel connceting point, PCC chamber, CI cover with frame etc., including necessary excavation in any type of strata, returning, filling, removal of soll outside MD land filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part 1, connected to Earthing test point all as specified and directed and testing on completion. EE - 04, DG Set - 04, Firefighting - 02, LP - 02, Lift - 4

EXTERNAL WATER SUPPLY

Cutting existing CI pipe 80mm dia for branch connection of 50mm dia GI pipe and insertion of Tee 80 x 80 x 50mm dia and connectiong complete including cutting existing pipe threading and inserting Tee and nipple & union of 80mm dia including all required excavation and earthwork complete all as specified & directed.

Supply, installation, testing and commissioning of centrifugal monoblock pump set of capacity 25m head and 42 LPM discharge, 3ph , 415V , 50 Hz complete with GI medium grade suction and delivery pumps upto common header including foot valves of suitable size of Make: Normex or equivalent with suitable size sluice valve & NRV on delivery pipe includung foundation of pump as per manufacturer's recommendation complete all as specified and directed.

Construction of brick masonary valve chamber of size 0.9m x0.9m x 0.9 mtr (internal dimension) above ground level 30 cm suitable for 100 mm dia sluice valve, 15 cm thick foundation using PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate ) over 15 cm thick hardcore, 23 cm thick brick wall, built in cement and sand mortor 1:4, 15 cm thick Internal and external plaster including top of floor in cement and sand mortor 1:3,finished even and smooth, without using extra cement, 10 mm thick mild steel plate cover on 50 mm x 50mm x 6 mm MS angle iron frame embeded in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate ) coping having rectangular hinged opening of size with locking arrangement & handle made out of 25 cm dia MS round bar, hold fasts etc, applying one coats od red oxide primer and two coats of synthetic enemelled paint to all steel surfaces and earth work in any type of soil including disposal of surplus soll to a distance not exc. 50 mtr complete.

FIRE FIGHTING

M & L for low smoke zero halogen (LS0H) fire survival control cable with circuit integrity, conforming to BS 7846 and rated for 600 V, having plain annealed stranded copper conductor with fire-resistant mica tapes covered by an extruded layer of cross-linked polyethylene, extruded layer of thermoplastic low smoke zero halogen (LS0H) compound, single layer of galvanized steel wires and thermoplastic LS0H compound sheath, suitable for operating temperature range -40 ˚C to +90 ˚C and minimum bending radius being 12 times the overall cable diameter, including laying, clamping, termination and ferruling complete all as specified and directed by the engineer-in-charge. a) 2 core, 2.5 mm² (for instrumentation)

b) 3 core, 2.5 mm² (for auto start/stop panel)

c) 12 core, 2.5 mm² (for diesel engine pump)

M & L for 1.1 kV grade copper conductor, XLPE insulated armoured cable conforming to IS 7098-1: 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by the engineer-in-charge. a) 3 core 35 mm² (for electric motor driven main fire pump)

b) 3 core 6 mm² (for jockey pump & booster pump)

M & L for Earthing complete with galvanised earth plate electrode 60 cm x 60cm x 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to GI strip 25 x 4 mm as earthing lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including 20 mm bore medium grade GI Pipe with MS funnel with wire mesh,.watering arrangement and 40 mm bore medium grade Gl pipe for earth lead protection from earth plate to test point or pannel connceting point, PCC chamber, CI cover with frame etc., including necessary excavation in any type of strata, returning, filling, removal of soll outside MD land filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part 1, connected to Earthing test point all as specified and directed and testing on completion.

M & L for ASTM (uPVC) D 1785 / Sch 80 pipe, conforming to IS 4985: 2000, with all fittings fixed to walls and ceilings or laid in floors complete as specified and directed by the engineer-in-charge. a) 40 mm NB

b) 32 mm NB

c) 25 mm NB NOTES: [i] All hangers, clamps, brackets etc. shall be of galvanized iron. [ii] Welding of any kind on the galvanised support / hanger shall not be permitted.

M & L for PN 1.6 rated 200 mm NB polypropelene vortex inhibitor suction lift, conforming to BS 4504 with stainless wire mesh, bolts, nuts and washers, etc. complete all as specified and directed by the engineer-in-charge. Make: Associated Enterprises, Enduramaxx, Balmoral Tanks

M & L for FM approved and UL listed, PN 1.6 rated lever operated, wafer type 65 mm NB CI butterfly valve, conforming to IS 13095: 1991,fitted with visual indicator & temper switch, having Cast iron (CI) body with ductile iron EPDM coated disc, SS431 stub shaft, PTFE bushing, flange drilling standard end connection conforming to IS: 1538- 1993 along with necessary accessories complete as specified and directed by the engineer-in-charge (for Zone control valve assembly). Make:Grinell-Tyco, Nibbco, BK valve, Kartar valves

M & L for FM approved and UL listed 25 mm NB compact 3 position ball valve with drain orifice (Test and Drain valve) to test and drain water flow through sprinkler systems having OFF-TEST-DRAIN position, integral sight glass, rated pressure 300 psi, orifice size 15 mm and K factor 5.6, conforming to NFPA 13, along with necessary accessories complete as specified and directed by the engineer-in-charge (for Zone control valve assembly). Make: Tyco, HD, Viking

S & F of CL#150 rated two-piece design 25 mm NB Cast iron (CI) Straight pattern ball valve, conforming to IS 9890: 1981 and tested as per BS 6755-1, having Cast iron body, Stainless steel AISI 304 ball, renewable PTFE seat & gland packing, CS fastners & lever having screwed / socket weld end connection with accessories complete all as specified and directed by the engineer-in-charge. Make: Leader, Sant, Venus,Tyco-Grinnell, Zoloto, RB

S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed by the engineer-in-charge. Make: Newage, AAAG, Minimax

S & F 6 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed by the engineer-in-charge. Make: Kanex, Minimax, Aim-EX, Safeguard, coffco, Variex

S & F of 4.5 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed by the engineer-in-charge. Make: Kanex, Minimax, Aim-EX, Safeguard, coffco, Variex

Supply, installation, testing and commissioning of UL listed (fire fighter's) addressable Telephone Jack mounted to a single-gang electrical back box with suitable interface module for two way communication with the Central Fire Fighter Telephone Console complete all as specified and directed by engineer-in-charge. Make: Notifier FPJ + FCM-1 or equivalent model of JC, Esser

Supply, installation, testing and commissioning of UL listed Fire Fighter's Telephone Handset for two way communication with the Central Fire Fighter Telephone Console complete all as specified and directed by engineer-in-charge. Make: Notifier FHS or equivalent model of JC, Esser

M & L for low smoke zero halogen (LS0H) flame retardant fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, drawn through concealed PVC conduit and having plain annealed stranded copper conductor with primary insulation of glass mica fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed by the engineer-in-charge. Make: RR Kabel, Polycab, Havells a ) 2 core, 1.5 mm²

b) 2 core, 2.5 mm² (supply to hooter / strobe)

CONDUITS FOR TELEPHONE & TV

M & L Telephone Jack RJ 11 With shutter along w1th pressed steel sunken box with 3 mm thick PVC top cover complete all as specified and directed.

M & L LAN RJ45 Mounting with jack (CAT6) socket along with pressed steel sunken box with 3 mm thick PVC top cover complete all as specified and directed.

S & F 10 pair telephone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc

S & F 50 pair telephone distribution box with suitable S.S. frame for mounting tag module, Krone module and incorporated in 16 SWG MS box with proper lockable cover. The box should be fixed on wall with suitable fasteners including painting & earthing. This also includes fixing the cable, distribution chart sufficient space for the cables, wires etc

LIFTS

Supply, install, testing & commissioning of 13 Passengers Lifts suitable to serve Each G+4 upper floors with Regenerative AC variable voltage & variable frequency (VVVF drive) drive complete with all standard accessories, simplex collective automatic & manual dual controlled operation with/without attendant, automatic centre opening doors with VVVF door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (03 Nos, one each in car & near Ground floor landing door and one with hand set in machine room) complete all as specified and directed. Make: OTIS / SCHINDLER /MITSUBISHI/ KONE/ HITACHI/ FUJITEC/ THYSSEN KRUPP)

Note :Lift OEM to submit detailed specification/design parameters, construction drgs of all components of lifts as per IS-14665 for approval of accepting officer before execution of work. GE and Engineer-in-Charge shall ensure that detail drawing shall be forwarded to this Headquarter for approval with recommendation within one month of issue of work order. (a) Type of Lifts : 13 Passengers. (b) Load capacity: 884 Kgs. (c) Speed : 1.5 mtr/sec with single speed motor. (d) Power Supply: 415 volts, 3 phase AC, 50 Hz. (e) Type of Drive : Regenerated AC variable voltage & variable frequency drive alongwith converter unit. The generated power shall be used to charge the battery of UPS and ARD and emergency light. (f) Type of Machine: Low inertia gearless permanent magnet synchronous motor, directly coupled horizontal traction machine. (g) Car size (inside): Not less than 2.20 Sqmm.

(h) Car door and landing door at all floor: Automatic centre opening with WVVF door drive, opening size not less than 900mm x 2000mm, sliding type, fabricated by stainless steel sheet not less than 16 gauge having hairline finish (N-304). (j) Car enclosure :(i) Manufactured with stainless steel sheet not less than 16 gauge with hair line finish (N-304), having stainless steel false ceiling with hairline finish, Internal lighting arrangement with 04 Nos LED light for commercial supply and one No LED for emergency light each 11 watt light fitting complete, internal ventilation system provided with concealed arial flow/cross flow fan with auto cut off system and stainless steel grill/wire mesh for protection. (ii) Provision of standard thickness stainless steel hand rail 40mm dia all around inside the car cabin. (k) Terminal buffers : Metal special spring buffers as per manufacturer specification. The buffing stroke shall not be less than 200mm. (l) Door opening (Inside): Protected by centre opening stainless steel doors. with hairline finish doors with clear opening size not less 900 x 2000mm. (m) Car & counter weight Guide: Guide rails of "T Section Mild steel as per OEM design. Counter weight shall be cast iron as recommended by OEM. (n) Flooring: Aluminium chequered plate 5mm thick.

(o) Signals (i)Combined luminous hall buttons with LCD/VFD hall position indicators at all floor. (ii) (LCD/VFD for car position indicator to be fitted in COP made of stainless steel. (iii) (One No car operating panel with luminous buttons in car (stainless steel), (iv) Car direction indicator in car & Landing (v) Battery operated alarm bell & emergency light (rechargeable) along with suitable maintenance free battery. (This system should be separate from ARD batteries). (vi) Overload warming feature in car cabinet(Display & announcing both type). (vii) Fireman's switch one No per lift to be installed at ground Floor near landing door. (viii) All signal fixture & car operating panel on stainless steel face plate with hair line finish (ix) Infra red door sensor safety edge of door for entire height.

(x) Built in announcing system without hand set.02 Nos ( One for lift car & ground floor landing door & one announcing system with hand set in machine room). (xi) Hoist-Way: Construction details as per building drawings (xii) The interior of the car should be provided with a device that audibly indicates the floor position of lift car has reached and indicates that car entrance/exit door is open or closed. (p) Stops & Opening: 05-05 (All opening on same side). (q) Safety Device: (i) Automatic rescue devise (ARD)/Automatic landing device with maintenance free battery having suitable capacity. The batteries must have auto charging facilities. The charger input be connected with converter of Regenerative drive. ii) The ARD actuation time should be less than one second after failure of power supply and when ARD is operative the car should stop the nearest floor and then open. (iii) Make of ARD: ADICON/ YASKAWA/ SIEMENS/ L&T/ OTIS/ GE/ HUNDAI/ TOSHIBA/ FUJI/ OEMs own make. (r) Operation: Simplex, full collective automatic operation with/without attendant. (s) Machine Room : Located above the hoist way. (Details as per appendix attached)

S & F of MCCB 63 Amp, 4 pole, 415V, 35KA Make: L&T / Legrand / Schneider

DG SET

Supply installation, testing & commissioning of factory assembled stand by Diesel Engine driven generating set coupled with alternator AC to give continuous output of 160 KVA at a power factor of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, diesel engine liquid cooled, mounted on common base frame complete with in built fuel tank of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, micro processor based relay panel for automatic starting on mains failure, control panel showing all parameters of engine & alternator, sound proof canopy & other accessories etc. and confirming to the under mentioned technical specifications as per specified & directed. (A) DIESEL ENGINE: Water cooled, turbo charged, 1500 to 3000 RPM under NTP conditions conforming to IS-4722, BS-5000, IEC-34/1, ISO 8528, BS-5514, ISO-3046 with an overload capacity of 10% for 12 Hrs of continuous operation as per complete with the following accessories. (a) Radiator with blower fan with guard (b) Pipe coupling for cooling system (c) Corrosion inhibitor coolant (d) Filters for fuel/lube oil (e) Fly wheel housing and fly wheel suitable for alternator (f) Engine bearing mechanism in fly wheel housing (g) Shut off coil protection with safety for LLOP /HWT/ Over speed/high and low DC

(h) Dry type heavy duty replaceable paper element air cleaner with restriction indicator and vacuum indicators. (j) Residential silencers. (k) Stainless steel exhaust flexible bellows. (l) Motor driven priming pump. (m Electric starter motor (n) Battery charging alternator. (o) Exhaust piping made out of "C" class MS Pipe inclusive of all accessories and hardware, necessary support as per manufacturer's recommendations to sustain back pressure with rain cap. (p) Mineral wool insulation covered with aluminium sheets for the entire length of exhaust pipe as per manufacturer's recommendations.

(q) First fill of oil, coolant and diesel during commissioning. (r) Interconnecting copper cabling of adequate capacity between batteries and (s) Fuel pipe. C class (t) Self starter 12/24 volts DC. (u) Metering equipments for recording (i) Battery voltage and charging rate (ii) Coolant temperature (iii) Lubricating oil pressure (iv) Engine speed (RPM) (v) Engine hours run (vi) Balance of fuel.

(v) Safety as protection control (Trip and indication) (i) High water temperature (ii) Low Lube oil pressure (iii) Low and high speed trip (iv) High and low DC voltage (v) over speed Stop (w) Base frame: Sturdy fabricated welded construction, channel iron base frame (duly painted) for (x) Battery: 12/24 Volt, 180 AH maintenance free with leads and terminals (y) Fuel Tank: Built in diesel storage capacity not less than 12 Hrs running of DG set or as per (B) ALTERNATOR 160 KVA at 0.8 PF lagging, 415 volts, 3 Phase, 4 wire, 50 Hz at 1500 RPM self excited and self regulated with AVR brushless excitation band of voltage ± 1% of rated voltage from no load to full load insulation class H, self ventilated and conforming to IS4722, BS5000, IEC 34/1, ISO 8528, BS5514, 1503046, suitable for above mentioned diesel engine (C) ACOUSTIC ENCLOSURE: Factory made acoustic enclosure (canopy) having (D) CONTORI PANEL: Control panel made out of 2mm thick CRCA sheets in suitable compartments front openable duly powder coated, weather proof and long lasting finishing including the followings: (i) Set of 400 Amps electrolytic copper bus bar for phase and neutral mounted over the hygroscopic PVC insulator. (ii) MCCB 100-250 A, 4 Pole microprocessor based adjustable magnetic and thermal release setting 70% to 100%, rupturing capacity 25 KA, 415 volt, 50 Hz with over load and short circuit protections as per approved make-01 No.

(v) Voltmeter digital type 0 to 500 volts range: 01 No (v) Amp meter digital type 0 to 300 Amps range complete with suitable CT's-01 No. (vi) MF meter digital type incl recording total and running Hrs complete (vii) Instrument fuses (HRC type) (viii) Bottom gland plates for incoming and outing cable (ix) Circuit diagram plate (E) Automatic Main Failure (AMF) control panel:- Indoor type, factory fabricated cubical type, free standing, floor mounted, AMF control panel, provided with removable rear door & hinged front door easy accessibility, fabricated out of not less than 2.0 mm thick CRCA Sheet powder coated CPRI approved comprising of:

COMPREHENSIVE MAINTENANCE OF LIFTS

Comprehensive maintenance and repair of fully automatic electrically operated fire elevator lift of any make installed against BOQ Item No. 24.01 in building (G+4 Upper Floors), (Total 02 Lift) comprising of all devices and accessories through out 12 months on all days including holidays for period of 03 years after expiry of defects liability period as shown below and all as specified and directed by GE. Note : Contractor shall carryout comprehensive maintenance (routine, daily, weekly, monthly, quarterly, half yearly, yearly) as per attached Performa and maintain all the lifts in serviceable condition 24 hrs x 365 days with out any extra cost.

(a) 1st year after expiry of defects liability period

(b) 2nd year after expiry of defects liability period

(c) 3rd year after expiry of defects liability period

Notes :- (i) Rates quoted under Sch A shall be for both materials and labour complete unless mentioned otherwise. (ii) After expiry of the defects liability period of 24 months from the certified date of completion of work, Government reserves the right to order the contractor to carryout comprehensive maintenance services of the lift (provided by him under Sch A in accordance with terms and conditions detailed in Sch A and specifications enclosed thereof in the event of Govt. exercising the above right, the terms of comprehensive maintenance service contract shall be for a period of three years. Total period of comprehensive maintenance service contract of the lift shall be three years from the expiry date of the details liability period. (iii) The contractor shall enter in to a MOU with the OEMs for the provision of the lift and further maintenance. The MOU for the post warranty/post defect liability period between the contractor the contractor and OEM shall be submitted at least six months prior to the issue of completion certificate of the main contract.

(iv) The rate quoted under this Sch A shall be deemed to include for materials and labour required for comprehensive maintenance including repairs. (v) The work covered under Sch A will be ordered on the contractor by the respective Garrison Engineer on every year through a separate works order for the lifts installed in their area at the rate quoted by the contractor till completion of three years comprehensive maintenance. (vi) This contract shall be operative for the period of three years after expiry of defect liability period only for the purpose of comprehensive maintenance. (vii) In case of non function of Lift recovery shall be effected after the defect is noticed or notified either in writing or through a social media message by GE or his rep in terms of PS clauses mentioned in the tender.

Vishal Builders

Hem Construction Company

DARSHAN CONSTRUCTION Co.