REPAIR/ MAINTENANCE OF INTERNAL WIRING, SUB MAIN WIRING ,DB, EARTHING AND CONNECTED ITEMS AT DEPOT AREA COMPLEX AND CERTAIN AREA AT BHARATPUR

Amount

Taking down carefully existing unserviceable batten/surface conduit/ concealed conduit aluminium point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc including sunken boxes and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engineer-in-Charge.

Taking down of unserviceable DBs/ switch fuses/ changeover in sheet steel enclosure complete with MCBs/Fuses/grips any capacity after disconnecting all cables etc and removing from site and making good disturbed surface of wall, floor etc. complete all as specified and as directed by Engineer-in-Charge.

Dismantling of old U/s sub main wiring and service wire of any size and make complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with multistranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated FRLS and unsheathed of size 1.5 Sq mm drawn in and including PVC casing and capping (ISI Marked) with all fittings such as tees, bends etc terminating in and including MS sunken box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.50 Sqmm FRLS PVC insulated unsheathed copper conductor multistanded cable, as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge

All as per item No 04 here-in-before but socket point on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 04 here-in-before but socket point on the independent board complete all as specified and as directed by the Engineer-in-Charge.

Ditto- all as per srl item No 04 here-in-before but with multi stranded copper conductor cable, 1100 volts grade (ISI marked), PVC insulated and unsheathed FRLS of size 2.5 Sqmm and with and including 2.5 Sqmm PVC insulated unsheathed multistanded copper conductor FRLS cable as earth continuity conductor to common earth and connect to earth dolly for one 16 Amp socket outlet point on the independent board complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed FRLS of size 1.5 Sq mm stranded core drawn in and including non metalic ridge concealed conduit with all fittings such as tees, bends etc terminating in and including New MS sunken box covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.50 Sqmm PVC insulated unsheathed copper conductor FRLS cable, solid multistanded as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 08 here-in-before but socket point on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 08 here-in-before but socket point on the independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 08 here-in-before but one light point controlled by 02 way switch complete all as specified and as directed by the Engineer-in-Charge.

Ditto- all as per srl item No 08 here-in-before but with multi stranded copper conductor cable, 1100 volts grade (ISI marked), PVC insulated and unsheathed FRLS of size 2.5 Sqmm multistanded and with and including 2.5 Sqmm PVC insulated unsheathed multistanded copper standed conductor cable FRLSas earth continuity conductor to common earth and complete to earth dolly for one 16 Amp socket outlet point on the independent board complete all as specified and as directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 and 15 Amps, flush type multipurpose, 230 V complete all as specified and as directed by Engineer-in-Charge.

S&F switch and socket combination 2 in 1, 16 Amps, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F switch piano flush type, Single pole 6 Amps, one way, complete all as specified and as directed by Engineer-in-Charge .

S&F modular switch and socket combination 2 /3 pin 6 Amps 2 module 230 volt Make : Anchor code No 95015 penta or equivelent in Legrand complete all as specified and as directed by Engr-in-Charge.

S&F modular switch and socket combinatin 2/3 pin 6/16 Amp 2 Module 230 volt make : Anchor code No 4282 penta or equivelent in Legrand complete all as specified and as directed by Engr-in-Charge.

S&F modular switch 1 way 6 Amps 1module 230 volt grade Make : Anchor Code No 95111 Penta or equivelent in Legrand complete all as specified and as directed by Engr-in-Charge.

S&F modular bell push flush type 5 Amps 230 volts grade code No 95113, Make : Anchor Penta or equivelent in Legrand complete all as specified and as directed by Engr-in-Charge.

S&F modular step up type electronic fan regulator 2 module 120 watt make : Anchor code No 50440 penta or equivelent in Legrand. complete all as specified and as directed by Engr-in-Charge.

S & F white cover plate with frame,2 module complete all as specified and as directed by Engr-in-Charge.

S & F white cover plate with frame, 4 modular complete all as specified and as directed by Engr-in-Charge.

S & F white cover plate with frame,6 module complete all as specified and as directed by Engr-in-Charge.

S & F white cover plate with frame,8 module complete all as specified and as directed by Engr-in-Charge.

S&F Bell push button Piano flush type single pole 5 Amps complete all as specified

S&F of ceiling rose poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F Bell Multi musical AC single pole 230 volts ISI marked, complete all as specified and as directed by Engineer-in-Charge.

S&F step type electronic fan regulator EME type 450 watt complete all as specified and as directed by Engineer-in-Charge.

S&F submain wiring with 10 Sqmm multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 10 Sqmm multistanded coper conductor PVC insulated and PVC sheathed FRLS cable for earth continuity conductor drawn in and including PVC conduit with all PVC accessories fixed on wall, floor/ceiling etc. complete all as specified and as directed (Note two run of 10 sqmm and one run of 10 sqmm will (as earth wire) be measured as 1 RM)

M&L Cutting chases,pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps cills,sunshades,shelves lintel etc.and cutting chases for concealed water tubing or concealed conduit wiring etc,and making good cutting not exc 10 cm girth on stone concrete block or slab walls complete all as specified and as directed by Engr-in-Charge

S&F Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated copper bus bar,SPN 8 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make -L&T ( Exora series)/Cat Part No 607711 of legrand /NBKRENSNDD08 in Schnedier or equivalent in Make Siemens

Ditto item 31 but for 4 way SPN Cat Part No 607710 in Legrand/ NBKRENSNDD04 in Schnedier or equivalent in Make L&T (Exora series )/Seimens complete all as specified and as directed by Engr-in-Charge

Supply & fix 12 way VTPN Distribution Board (with provision for MCCB as incomer & WiNtrip MCB as outgoing) Make:C&S CSDBMCCB100DD12IP43 or equivalent make in Indoasian/ havells /L&T complete all as specified and as directed by Engr-in-Charge

Supply and Fixing MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge Make :- Legrand cat Part No 408587 to 408595/ cat No A9N61515 of make Schnedier or equivalent in make Siemens/ L&T Exora series

Supply and Fixing MCB suitable for 6 to 40 Amps, 240 Volt AC supply C Curve single pole and neutral (SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand cat Part No 408609 to 408617/ cat No A9C62263 of make Schnedier/ Siemens/ L&T Exora series

Supply and Fixing MCB suitable for 63 Amps, 240 Volt AC supply C Curve single pole and neutral (SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand cat Part No 408620 or equivalent make in Schnedier/ Siemens/ L&T Exora series

Supply and Fixing MCCB suitable for 160 Amps, 415 Volt AC supply (ICU 50 KA) DPX3160 with over load and short circuit protection having rupturing capacity not less than 36 KA complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand cat Part No 420137 or equivalent make in Schnedier/ Siemens/ L&T Exora series (Note for Srl item No 31 to 37; DBs & MCBs shall be of same make)

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body, PC diffuser and inbuilt driver with Batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm Cat Part No:LTT8-20+DMLN1LT8-16, Make Crompton or equivalent in Bajaj/Havells/Philips/Crompton.

Recess mounted 2x2 luminaire comprises of thermally conductive material cmplete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm.Havells Code No : VENUSNEOTW2X2PLR42WLEDTWMOD or equivalent in Philips. (Note For Srl Item No 38 & 39 her in before- Manufacturer test certificate of LED luminaries shall be submitted by contractor alongwith payment claim)

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m and 50 mm thick RCC (1:2:4 type b0) pit cover reinforced with 8 mm dia @ 150 mm c/c both side in lieu of CI Cover all as specified as shown in electrical plate No 3 SSR Part-I.

M&L batten holder insulated body with back plate icluding suitable size of PVC round block complete all as specified and as directed by Engineer-in-Charge

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge. Make- Cat Part No 607841 of Legrand or equivalent in Schneider/ Seimens/ L&T

S & F street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and as directed by Engineer-in-Charge.

Supply & fix 18 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP66 with 10KV surge protection road way,luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Crompton Cat No LSTS-18-CDL or equivalent in wipro, Bajaj, Philips

M/s Rajesh Traders

M/s Kok Singh Sisodia

Pioneer Enterprises

abha enterprises

PD GUPTA AND COMPANY

krishna Associate

AMIT RISHABH BUILDERS PRIVATE LIMITED

MS Kumar and Brothers