REPAIRS/ REPLACEMENT OF INTERNAL WIRING, DISTRIBUTION BOXES, CEILING AND EXHAUST FANS, GEYSERS, DEFECTIVE LIGHTS AND FITTINGS AND OTHER RELATED ITEMS IN NAVAL AREA UNDER GE HADDO, PORT BLAIR

Amount

Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.

Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.

Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for the following :-

ONE LIGHT/FAN point controlled by one, one way 5 Amps switch.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent board.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on same board.

ONE BELL point controlled by one, one way 5 Amps switch.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent but below the switch board of light point with cable of 1.5Sqmm size.

M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 15A SOCKET OUTLET point controlled by one, one way 15 Amps switch on independent board.

S&F switch piano, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, 240 volts complete all as specified and as directed.

S&F socket outlet, 5 pin, 5A, flush type, multipurpose, 240 volts complete all as specified and as directed.

S&F socket outlet, 2-in-1, 6 pin, 5A/15A, flush type, multipurpose, 240 volts complete all as specified and as directed.

S&F bell push, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.

M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 5A, 240 volts complete all as specified and as directed.

S&F in repairs switch socket combination box type 2 in 1, 5 pin, 5 Amps, flush type,universal complete all as specified and as directed. Make: Anchor/Cona/Legrand

S&F in repairs switch socket combination box type 2 in 1, 6 pin, 5 Amps & 15 Amps, flush type,universal complete all as specified and as directed. Make: Anchor/Cona/Legrand

S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed.

S&F in repairs fan regulator, electronic socket two module step type 120W complete as specified. Make : Anchor/Cona/Legrand

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC conduit of suitable size (not less than 25mm dia) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for the following:-

ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.

TWO LIGHT points controlled by one, one way 6 Amps modular switch.

ONE BELL point controlled by one, one way 6 Amps modular switch.

ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on independent board.

ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on same board with other switches.

ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent but below the switch board of light point with cable of 1.5Sqmm size.

M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC conduit of suitable size (not less than 25mm dia) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.

S&F modular switch, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular switch, one way, one module, single pole, 16 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular socket, multipurpose, 2/3 pin combined, 2 module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular socket, multipurpose, 2/3 pin, 6/16 Amps combined, 2 module, single pole, 240 Volts ACcomplete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular bell push, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular electronic fan regulator for ceiling fan, step type, 5 speed, AC, 2 module, 120 watts, 240 volts complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

Taking down carefully ceiling fan of any sweep from ceiling hook at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and hanging back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.

Taking down carefully exhaust fan of any sweep from its position at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and fixing back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.

Taking down carefully wall mounting fan of any sweep from its position at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and fixing back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans. NOTE for Item No. 25 to 27: The representative of the contractor shall report to Engineer-in-Charge/JE on daily basis to carry out repairs to fan and completion report to be submitted.

Rewinding of ceiling fan (any sweep) stator by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in ceiling fan complete all as specified and as directed.

Rewinding of exhaust fan by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.

Rewinding of wall mounted fan by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.

Suplly only ball bearing suitable for ceiling fan with bearing No. 6201/6202 complete all as specified and as directed.

Suplly only shaft suitable for ceiling fan 1200mm/1400mm sweep complete all as specified and as directed.

Suplly only Ceiling fan blade set of 1200/1400mm sweep complete all as specified and as directed.

Suplly only exhaust fan blade set of 150/250/300/380mm sweep complete all as specified and as directed.

Suplly only wall mounted fan blade set of 300/400mm sweep complete all as specified and as directed.

Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel paint, replacement of wornt out spares and reassembling the geyser and re-fixing back in its original position complete all as specified and as directed. NOTE: Spares shall be measured and paid separately under relevant items as SUPPLY ONLY.

SUPPLY ONLY heating element 1500 watts.

SUPPLY ONLY thermostat switch.

SUPPLY ONLY pressure release valve.

SUPPLY ONLY thermal cut out.

SUPPLY ONLY indicator lamp RED/GREEN colour.

SUPPLY ONLY PVC connection 15mm size with PTMT nuts of length 600mm. MAKE: PRAYAG/ POLYTUFF

S&F in repairs Starter switch of capacity 25 Amps, working on 240 volts, AC supply, suitable for air conditioner complete all as specified and as directed. MAKE: Crabtree Cat part No. ACAO252504 or equivalent in ANCHOR/ L&T/ HAVELLS

M&L for Sub main wiring complete with four runs (3P+1N) of 10.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 10.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Four runs of 10.0 Sqm copper conductor, One run of 10.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with four runs (3P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Four runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 1.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 1.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 1.5 Sqm copper conductor, One run of 1.5 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

S & F DB VTPN sheet metal enclosure double door IP 43 protection, door earth suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP. Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete including taking down old unserv DB of any type /rating and making good to the distrubed surface /walls all as specified and directed. Make : Indo Asian/Havells/L&T/Legrad

S&F MCB DB, SPN, 12-way, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811808 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, SPN, 8-way, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811807 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, SPN, 4-way, double door, 240 Volts, 50 Hz with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811805 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F in repair MCCB, 4 pole, 125 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed. MAKE: INDO ASIAN/ L&T/ LEGRAND/ HAVELLS

S&F in repairs MCCB, 3 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed. MAKE: INDO ASIAN/ L&T/ LEGRAND/ HAVELLS

S&F MCB, TPN, "C" series, 415 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811220 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, TP, "C" series, 230 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811198 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, TP, "C" series, 230 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811196 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, DP, "C" series, 230 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811174 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811122 to 811129 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F in repair of 18 watts surface mounted LED light fitting with slim high perfomanance surfaced mounted LED Panel. PDC, aluminium housing and and high translucent frosted plastic diffu7ser makes it a robust luminaire , efficacy . 100 lm/W light fittings yellow/white colour, round/square shape as requirtaed at site complete all as specified and directed. Make : CG Cat Part No: LCDSPLN-S-18-CDL or equivalent make of Philips/Havells/Luker NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 18 Watts, 220 Volts recess mounting LED ceiling light fitting, yellow/white colour, round/square shape as requirement at site, made from slim design LED polycarbonate ;housing down lighter with superior light output and integral driver. Efficiencxt 100 lm/w complete all as specified and directed. Make : CG Cat Part No. LCDEP-18-CDL or equivalent make of Havells/Luker/Philips NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 15 Watts, 220 Volts recess mounting LED ceiling light fitting, yellow/white colour, round/square shape as requirement at site, made from slim design LED polycarbonate ;housing down lighter with superior light output and integral driver. Efficiencxt 100 lm/w complete all as specified and directed. Make : CG Cat Part No. LCDEP-15-CDL or equivalent make of Havells/Luker/Philips NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 09 Watts, 220 Volts recess mounting LED ceiling light fitting, yellow/white colour, round/square shape as requirement at site, made from slim design LED polycarbonate ;housing down lighter with superior light output and integral driver. Efficiencxt 100 lm/w complete all as specified and directed. Make : CG Cat Part No. LCDEP-09-CDL or equivalent make of Havells/Luker/Philips NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

Supply and fixing of LED tube light fittings with 20 Watt, 4 feet (White/worm white colour as required at site ) trim linea neu is a PC batten, Compact appearance, simple and versatile in nature makes it as long lasting, efficiency solution for offices and other commercial spaces efficacy 100 lm/W , THD ≤ 15% with operating voltage range 150-300V, 50Hz with driver efficency > 85%,surge voltage withstand 2.5KV,Power factor ≥ 0.9 ,energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed Make: CG Cat Part No :CCS-102-20-65-SL-DP-NWH or equivalent make to Luker/ Havells/Philips Note:Quoted rate is inclusive of any other misc materials required for fixing new fittings

S&F 25 watts LED building security light fittings IR 65 luminaire. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 including necessary fixing arrangements as per site requirements complete all as specified and directed. Make : Philips Cat Part No. BRP042 LED 19 CW MR S1 PSU GR or equivalent in Havells/ Luker/CG

Supply and fixing of LED tube light fittings with 10 Watt 2 feet (White/worm white colour as required at site ) trim linea neu is a PC batten, Compact appearance, simple and versatile in nature makes it as long lasting, efficiency solution for offices and other commercial spaces efficacy 100 lm/W , THD ≤ 15% with operating voltage range 150-300V, 50Hz with driver efficency > 85%,surge voltage withstand 2.5KV,Power factor ≥ 0.9 ,energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed Make: CG Cat Part No :CCS-102-10-65-SL-DP-NWH or equivalent make to Luker/ Havells/Philips Note:Quoted rate is inclusive of any other misc materials required for fixing new fittings

S & F of wall mounting decorative fittings of capacity 9 watts including 9 watts of LED bulb white/warm as required at site including fixing arrangement of light fittings complete all as specified and as directed Make: Philips Model No : 34302 or equivalent CG/Havells/Luker

S&F in repair of (CRYSTA COB SWIVEL) energy efficient 1x7W 3000K (white /yellow colour ) LED spotlight for low ceiling height applications round in shape, pressure die-cast aluminium housing, spring loaded clips for easy mounting complete all as directed. Make : Havells (Model No. LHEEGEPBIE1W009) or equivalent in Philips(7W COB PRO)/CG

S&F 30 Watts LED light, recess mounting luminaire with glare free uniform illumination having longer life and less maintenance, size 600mmx600mm, 25000 burning hours including all accessories and fixing arrangements for fixing the light fitting complete all as specified and as directed. MAKE: CROMPTON GREAVES Cat Part LCTLRNE-30-FO- CDL or equivalent in HAVELLS/LUKER/PHILIPS

S&F LED Strip light, 60 LED per metre, 28watts with driver, 2400 Lumen, 5 metre length, dimension 8mm wide x 3mm thick, including all fixing arrangment as per site requirement complete all as specified and as directed. The cradle is provided for monitoring purpose all as directed. Make: Philips Model: Skycove 28watt LED strip/CG/ Havells

S&F capacitor 2.5mfd, 230 Volts for ceiling fans including taking out old unserviceable one complete all as specified and as directed. MAKE: CAPCO/UNIVERSAL/TIBCON/EPCOS

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Repair to LED light /PTLS of any model/make/rating in position including testing of serviceability of connected accessories, and wiring upto respective switch/control unit including and replacing unserviceable items such as drivers , holder and making light functional. Note: (i) All the spares such as drivers, holder, LED tubes etc including replacing will be will measured and paid separately (ii) The representative of the contractor shall report to Engineer-in-charge/JE on daily basis to carry out repairs to light fitting and completion report to be submitted all as specified and as directed

S&F PVC insulated copper conductor cable of size 2.5Sqmm, 1100 Volts grade, Heavy Duty, served with inner sheathing (flexible) industrial cable complete all as specified.

S&F PVC insulated aluminium flat twin core cable of size 4.0Sqmm, 1100 Volts grade, Heavy Duty, weather proof complete all as specified.

S&F Step light 2watts including taking down old unserviceable light fitting complete all as specified and as directed Make: Philips Cat No: 30974 2 Watt LED ceiling light fixture or equivalent in CG/ Havells/ Luker

Removing and refixing the following during Addn/ Altn/ modification of existing structure:-

Light fixture/ switch socket outlet of any type and any capacity

Ceiling Fan/ Exhaust Fan of any sweep

Split Air Conditioner of any capacity

S&F in repairs only electronic drivers for 10 to 24 watt LED post top luminaire / LED light fittings operated at input AC voltage 85 to 265 Volts, 50Hz, output DC voltage 42 to 65 Volts, 300MA, P.F > 0.95 incl necessary fixing arrangment as per site requirement complete all as specified and as directed. MAKE: PHILIPS/ CROMPTON GREAVES/ BAJAJ

S&F in repairs only 9 Watts holder type LED lamp 230 Volts, 50Hz complete all as specified and as directed. MAKE: PHILIPS / C&S/ HAVELLS/ CROMPTON GREAVES

S&F in repairs only 7 Watts retrofit holder type LED lamp 230 Volts, 50Hz complete all as specified and as directed. MAKE: PHILIPS /C&S/ HAVELLS/ CROMPTON GREAVES

M&L for Repair to point wiring for light/fan/socket by cutting, removing and replacing the burnt and unserviceable wire with new FRLS cable and conduits with copper conductor 1.5/2.5 Sqmm size, jointing with same size wires, replacing the saddles, refixing the loose/hanging conduits/casing capping properly all as directed. Note:(i) Rate is inclusive for FRLS cable and other minor items (ii) The representative of the contractor shall report to Engineer-in-charge/JE on daily basis to carry out repairs and completion report to be submitted all as specified and as directed

M/s Pooja Enterprises

ISLAND SALES ENTERPRISES