Construction of Elementary major repair at GPS Malhar, Block Lohai Malhar, District Kathua. (PAB Plan 2023-24, Under Samagra Shiksha)

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : A) G.S. Sheet

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:A)In cement mortar

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: A) 1:3:6 or richer mix (i/c equivalent design mix)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.A)0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.A)0.63 mm thick with zinc coating not less than 275 gram/m2

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like:A) Cement mortar 1:6 (1 Cement : 6 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix.a)1 : 6 ( 1 cement : 6 fine sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with A) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level A) Cold twisted bars.

Centering and shuttering including strutting, propping etc. and removal of form work for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.A) 40mm thick with 20 mm nominal size stone aggregate.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. A)Welded

Engaged Carpenter/Helper for repairs to door windows complete job. (LMR)

Carpenter.

Helper

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. A) Second kail wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.A)Second Class kail wood

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade.A)

Applying priming coat: A)With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.A)Two or more coats on new work.

Carriage of material by Mechanical Transport/hed load including loading / unloading and stacking at site complete.

Sand for an average lead of 65 Km by MT and 100 mtr by HL.

Stone aggregate below 40mm nominal size for an average lead of 65 Km by MT and 100 mtr by HL.

Stone/boulder for an average lead of 500 mtr by HL.

Please Enable Macros to View BoQ information