Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.1 LAccepted-AOC ASTBAL MOHALLA BANASAR BAGH ROAD PATIALA GATE SANGRUR 148001 | SANGRUR | SANGRUR | PUNJAB | 148001 | L1 | Accepted-AOC Being Lowest bidder | |
| 2 | L2₹37.9 L+₹62,000 (1.66%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹38.0 L+₹75,431.50 (2.02%)Rejected-Finance 300 PREM BASTI 10 SANGRUR SANGRUR PUNJAB 148001 | SANGRUR | PUNJAB | 148001 | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Himanshu, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_589075_1
GE(S)/PAT/T-08/N/2023-24
Open Tender
Civil Works
Item Rate
180 days
Mil Stn Nabha
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (South) Patiala
₹80,000
Yes
23 Jun 2023
12 Apr 2023
10 May 2023
12 Apr 2023
8 May 2023
25 Apr 2023
12 Apr 2023 - 18 Apr 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge
M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed by Engr-in-Charge
M&L for ceramic tiles floor tiles of minimum size 600X600 mm 8 to 10mm thick in flooring etc set and jointed in neat cement slurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid over complete all as specified and directed by Engr-in-Charge
M&L Coloured glazed ceramic tiles (600 x 100 mm) x 8 to 10mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed by Engr-in-Charge
Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for anti skid coloured pressed ceramic floor tiles of minimum size 300X300 mm 8 to 10mm thick in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid over in complete all as specified and directed by Engr-in-Charge
M&L Coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (450X350 mm)X7mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed by Engineer-in-Charge.
M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cementcomplete all as specified and complete all as specified and directed by Engineer-in-Charge.
M&LMachine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge
M&L Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including 15mm thick screeed bed or bedding layer in CM (1:4), in complete all as specified and directed by Engr-in-Charge
Dismanteling 500ltr water storage tank and removing to store. complete all as specified and directed by Engineer-in-Charge.
M&L Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1. complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing of 15mm dia and removal to store complete all as specified and directed by Engineer-in-Charge.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.complete all as specified and directed by Engineer-in-Charge.
S & F 125mm Brass chromium plated shower rose complete all as specified and directed by Engr-in-Charge
S &F CP stop cock / cast copper alloy with crutch screwed down screwed for brass ferrule for 15 mm bore pipe after of any description complete all as specified and directed by Engineer-in-Charge.
S&F in repair Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair Pillar taps Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts scrrewed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F PVC enclosed case (cabin type) with cover and looking mirror over it with two shelves in it complete all as specified and fixed with screws on wall. complete all as specified and directed by Engineer-in-Charge.
S&F in repair gate valve 15mm cast copper alloy ,high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old gate valve of any descriptioncomplete all as specified and directed by Engineer-in-Charge.
S&F Angle stop valve(Concealed type) cast copper alloy chromium plated with capstan head , long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipeafter taking down old stop cock of any description complete all as specified and directed by Engineer-in-Charge.
S&F 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed by Engineer-in-Charge.
S&F Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed by Engineer-in-Charge.
S&F Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs.complete all as specified and directed by Engineer-in-Charge.
S/F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet, complete jointing, connecting and making good the disturbed complete all as specified and directed by Engineer-in-Charge.
S&F Viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rests including connection to traps and to flushing pipe, anti syphonage pipe complete fixed in repair.complete all as specified and directed by Engineer-in-Charge.
M&L fixed in repair Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs
Dismantling of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed by Engineer-in-Charge.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan to any raidus but in half thick brick walls
M & L Taking down cement plaster of any description any thickness from external surface of walls / soffits etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed by Engineer-in-Charge.
M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finish complete all as specified and directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid saparately
M&L for cement plastering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished complete all as specified and directed by Engineer-in-Charge.
M & L for Rendering 5mm thick cement plaster in CM 1:3 on concrete surfaces in ceiling/ Chhajjas finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound ISI marked. complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint over a coat of cement primer complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of old plastered or unplastered surfaces of walls and applying one coats of cement base paint. complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of old plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces all as specified.
M&LPreparing old plastered surfaces of ceilings and applying one coat of white wash in all complete all as specified and directed by Engineer-in-Charge.
M&L PCC (1:3:6), 50mm thick as in PCC path/ plinth protection.finished the surfaces even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.
Taking down off shutters only any description exc 1.0 Sqm but not exceeding 2.00 sqm complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.
S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 105x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 125x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified. complete all as specified and directed by Engineer-in-Charge.
S&F 35mm Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.
S&F in stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. all as directed. complete all as specified and directed by Engineer-in-Charge.
M&L preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer all as specified and directed. complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel barrel tower bolt 200mm long stove enamelled black with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel sliding door bolt of size 250mm , stove enamelled black with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts, complete all as specified and directed by Engineer-in-Charge.
S&F MS pressed handles of size 125mm oval type stove enamelled black. complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel butt hinges of size 100mm medium weight cold rolled. complete all as specified and directed by Engineer-in-Charge.
S&F 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) Not exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-Charge.
M&L Factory made steel windows box type using ERW hollow 'P' section comprising double frame for glaged and gauged skelton shutters jointed interally with flat iron 40x4mm complete including grill of 8mm square bar, fixed horrizontally @ 10cm centre to centre, hinges,handle tower bolts,lugs etc all as shown on drawing noTD-219(c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete Note;- (i)for the purpose of measurement& payment double shuttre with frame shall be considered as one unit. (ii) Glaging ,, wire mesh and glass, measured and paid for separately complete all as specified and directed by Engineer-in-Charge.
S&F 30mm thick PVC door factory made solid panell shutters concisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with hit moulded plain coulour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with screws. complete all as specified and directed by Engineer-in-Charge.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing
S&F 100 mm size PVC butt hinges all as specified. complete all as specified and directed by Engineer-in-Charge.
S&F 125MM PVC handles all as specified and directed. complete all as specified and directed by Engineer-in-Charge.
S&F 200mm long PVC tower bolt all as specified and directed. complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description from metal/wooden frame including punching or drilling out glazing pins/spring clips. complete all as specified and directed by Engineer-in-Charge.
S&F Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
S&F Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring. complete all as specified and directed by Engineer-in-Charge.
M&L for chequered cement concrete tiles with grey cement and pigment 20cmX 20cmX25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, over 20 mm thick cement screed bedding layer in cem,ent mortar 1:6, complete all as specified and directed by Engineer-in-Charge.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed by Engineer-in-Charge.
S&F Fe290 (Gde E-165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Note - Removing of old gate fixing new steel gate of hold fast , finish the surface included in this item. complete all as specified and directed by Engineer-in-Charge.
M& L for Preparation new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide as in primer complete all as specified and directed by Engineer-in-Charge.
S&F mild steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc all as specified & directed as in repair . (For the purpose of mesurement and payment running length of curtain rod only shall be considered.) complete all as specified and directed by Engineer-in-Charge.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed by Engineer-in-Charge.
S&F Health faucet (ABS body ) with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in positon complete all as specified and directed by Engineer-in-Charge.
S&F in repair PTMT Jet Spray with 1.0 metre PVC tube ( suitabale for european seat )complete all as specified and directed by Engineer-in-Charge.
S&F in repair CP toilet paper holder with flap model complete all as specified and directed by Engineer-in-Charge.
S&F 18 mm thick LEAD FREE PVC celuka ply of both side plain white color fixed with screws, slovent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed by Engineer-in-Charge. NOTE: not less than 10kg per sqm
S&F 18 mm thick LEAD FREE PVC celuka ply of both side plain of approved color other than white colour fixed with screws, slovent cement/adhesive to make kitchensides top and bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed by Engineer-in-Charge. NOTE: not less than 10kg per sqm
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg complete all as specified and directed by Engineer-in-Charge.
S&F Paino/continuous hinge of size 30 mm stainless steel complete all as specified and directed by Engineer-in-Charge.
S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel 304 grade wire Basket (avg wait 2.5 to 4 Kg per basket) of pull out type like plain/cup& saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required suze complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete all as specified and directed by Engineer-in-Charge.
M&L for providing pre-cast cement concrete louvers and jallies type B0 1:3:6 (12.5mm graded aggregate) 25mm thick ( measured solid) including all mouldings set in CM 1:6. complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.
M&L anodised aluminium snap grid false ceiling of grid size 605x605mm consisting of aluminium main and "T' sectiopns of size 25x35x1.5mm thick and wall angles of size 25x 25x 1.5 mm thick suspended with GI wire suspenders of 6mm dia of suitable length and 8-10 mm thick gypsum board, 60x60 cm size fixed with staples on snap grid complete all as specified and directed by Engineer-in-Charge.
S&F PVC wall panelling of hollow section size 150x10mm (colour/pattern as approved by AO)complete fixed in position in all respect including supply and fixing of all accessories like fasteners/ screws/ solvent etc all as recommended by manufacturer all as complete all as specified and directed by Engineer-in-Charge.
Dismantling of asbestos cement sheets [corrugated, semi-corrugated, etc] in roof coverings complete all as specified and directed by Engineer-in-Charge.
S & F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws complete all as specified and directed by Engineer-in-Charge.
Dismantling of unservicable wrought iron or mild steel of any description complete all as specified and directed by Engineer-in-Charge.
M&L for rectangle / Squar /circular hollow section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete all as specified and directed by Engineer-in-Charge.
m/s panchmukhi builders
AGGARWAL & CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .